Претрага

Упит dcterms_subject_txt:Numerical modeling

245 items

  • Bridging Computational Lexicography and Corpus Linguistics: A Query Extension for OntoLex-FrAC

    Christian Chiarcos, Ranka Stanković, Maxim Ionov, Gilles Sérasset (2024)
    OntoLex, dominantni standard zajednice za mašinski čitljive leksičke resurse u kontekstu RDF-a, Linked Data i tehnologija Semantičkog veba, trenutno se proširuje sa posebnim modulom za Frekvencije, Primere i Informacije zasnovane na Korpusu (OntoLex-FrAC). Predlažemo novi komponent za OntoLex-FrAC, koji se bavi inkorporacijom korpusnih upita za (a) povezivanje rečnika sa korpusnim mašinama, (b) omogućavanje RDF baziranih web servisa da dinamički razmenjuju korpusne upite i podatke odgovora, i (c) korišćenje konvencionalnih upitačkih jezika za formalizaciju unutrašnje strukture kolokacija, skica reči i ...
    standardizacija, digitalna leksikografija, OntoLex, upiti korpusa, povezani podaci, Lingvistički povezani otvoreni podaci

  • WebGIS Cadastre of Abandoned Mines in Autonomous Province of Vojvodina

    Ranka Stanković, Nikola Vulović, Nikola Lilić, Ivan Obradović, Radule Tošović, Milica Pešić-Georgiadis (2015)
    ... data export, as well as web search and visualization [9]. 2.3 Geodatabase model The geodatabase model was developed using UML (Unified Modeling Language) and CASE (Computer- Aided Software Engineering) tool Microsoft Visio, which has a developed integration feature with ArcGIS. Figure 1 ...

  • Multiple-Criteria Decision-Making in Mine Development Planning

    Sanja Bajić (2023)
    The Borska Reka ore deposit is an experimental location where developed methodologies have been applied. It is the largest ore body within the Bor mining complex, which has been the subject of numerous studies and analyses for more than three decades. The paper focuses on the application of FAHP and the VIKOR method to address ranking of alternatives and select the optimal mining method by means of fuzzy multicriteria optimization.

  • Nelinearno dinamičko modelovanje potresa izazvanih promenom naponskog stanja pri izradi horizontalnih podzemnih prostorija

    Srđan D. Kostić (2013-11-04)
    U ovoj disertaciji, cilj istraživanja bio je određivanje dinamičkih svojstava potresaizazvanih promenom naponskog stanja pri izradi horizontalnih podzemnih prostorija.Analiza potresa izvedena je sa dva aspekta – u prvom delu istraživanja izučavane suvremenske serije oscilovanja tla za vreme potresa, a u drugom delu vršena je analizastabilnosti fenomenološkog Baridž-Knopof modela bloka sa oprugom. Vremenske serijeoscilovanja tla proučavane su primenom postupka analize surogat podataka, kao ikorišćenjem metoda analize nelinearnih vremenskih serija (primena teoreme orazvijanju skalarne vremenske serije). Analiza vremenskih serija izvedena je ...
    potres, naponsko stanje, podzemne prostorije, bifurkacije, vremenskaserija, deterministički haos, stohastičnost, perturbacije, vremensko kašnjenje, jačina trenja
    ... criticality and universality in a nonconservative earthquake model, Physical Review E 63, 036111-1-5. 103.Lorig, L., and Hobbs, B. 1990. Numerical modeling of slip instability using the distinct element method with state variable friction laws, International Journal on Rock Mechanics and Mining ...
    ... state dependent friction law and two state variables. The stability analysis for these models is conducted numerically and analytically. The numerical analysis was performed for Carlson-Langer and Becker model, by applying the Runge-Kutta fourth-order method. In the case of Madariaga model, the ...
    ... American Geophysical Union Monograph, Washington DC, Geophysical Monograph Series 37, 341 p. 35. Daihua, Z., Miller, H.D.S., Kaiser, P. K. 1989. Numerical study of violent rock failure by stick-slip on joints, Mining Science and Technology, 9, 241–251. 36. Davies, N., Kijko, A. 2003. Seismic risk ...

  • Nelinearno dinamičko modelovanje potresa izazvanih promenom naponskog stanja pri izradi horizontalnih podzemnih prostorija

    Srđan D. Kostić (2013-11-04)
    U ovoj disertaciji, cilj istraživanja bio je određivanje dinamičkih svojstava potresaizazvanih promenom naponskog stanja pri izradi horizontalnih podzemnih prostorija.Analiza potresa izvedena je sa dva aspekta – u prvom delu istraživanja izučavane suvremenske serije oscilovanja tla za vreme potresa, a u drugom delu vršena je analizastabilnosti fenomenološkog Baridž-Knopof modela bloka sa oprugom. Vremenske serijeoscilovanja tla proučavane su primenom postupka analize surogat podataka, kao ikorišćenjem metoda analize nelinearnih vremenskih serija (primena teoreme orazvijanju skalarne vremenske serije). Analiza vremenskih serija izvedena je ...
    potres, naponsko stanje, podzemne prostorije, bifurkacije, vremenskaserija, deterministički haos, stohastičnost, perturbacije, vremensko kašnjenje, jačina trenja
    ... criticality and universality in a nonconservative earthquake model, Physical Review E 63, 036111-1-5. 103.Lorig, L., and Hobbs, B. 1990. Numerical modeling of slip instability using the distinct element method with state variable friction laws, International Journal on Rock Mechanics and Mining ...
    ... state dependent friction law and two state variables. The stability analysis for these models is conducted numerically and analytically. The numerical analysis was performed for Carlson-Langer and Becker model, by applying the Runge-Kutta fourth-order method. In the case of Madariaga model, the ...
    ... American Geophysical Union Monograph, Washington DC, Geophysical Monograph Series 37, 341 p. 35. Daihua, Z., Miller, H.D.S., Kaiser, P. K. 1989. Numerical study of violent rock failure by stick-slip on joints, Mining Science and Technology, 9, 241–251. 36. Davies, N., Kijko, A. 2003. Seismic risk ...

  • Coal homogenization stockyard sizing “Tamnava – Zapad” case study

    Božo Kolonja, Dinko Knežević, Ranka Stanković, Dejan Stevanović, Detlef Trummer (2016)
    ... stockpile reduce variation?. Chemometrics and intelligent laboratory systems, 74(1), pp.121-133. 7. Statsenko, L. and Melkoumian, N.S., 2014. Modeling Blending Process at Open-Pit Stockyards: A Northern Kazakhstan Mining Company Case Study. In Mine Planning and Equipment Selection (pp. 1017-1027) ...

  • Improvement of education through the cooperation between CEEPUS EURO Geo-Sci network and scientific projects: examples from UB-FMG

    Kristina Šarić, Dejan Prelević, Miloš Marjanović, Uroš Stojadinović, Vladimir Simić (2024)
    CIII-RS-0038, Recon Tethys, DEMONITOR, TMCmod, REASONING

  • Analogue modelling of strain partitioning along a curved strike-slip fault system during backarc-convex orocline formation: Implications for the Cerna-Timok fault system of the Carpatho-Balkanides

    Nemanja Krstekanić, Ernst Willingshofer, Taco Broerse, Liviu Matenco, Marinko Toljić, Uroš Stojadinović (2021)
    analogno modelovanje, raspodela deformacija, geometrija indentera, Černa i Timok rasedni sistem
    ... distribution of bulk strain into genetically different and coeval struc- tures that cannot be explained by a uniform stress field. Analogue and numerical modelling studies have demonstrated that the initiation and evolution of strike-slip corridors are always accom- panied with significant strain ...
    ... Atacama fault system, Northern Chile. Tectonophysics 400, 105–125. Chemenda, A.I., Cavalié, O., Vergnolle, M., Boissou, S., Delouis, B., 2016. Numerical model formation of a 3-D strike-slip fault system. Compt. Rendus Geosci. 348, 61–69. Chen, Z., Burchfiel, B.C., Liu, Y., King, R.W., Royden, L ...
    ... between major active faults in the Gulf of Cadiz (Africa-Eurasia plate boundary, offshore SW Iberia): tectonic implications from coupled analog and numerical modelling. Tectonophysics 548–549, 1–21. Rosas, F.M., Duarte, J.C., Schellart, W.P., Tomás, R., Grigorova, V., Terrinha, P., 2015. Analogue modelling ...

  • Pre-failure deformation monitoring as rockfall prediction tool

    Miloš Marjanović, Biljana Abolmasov, Zoran Berisavljević, Marko Pejić, Petko Vranić (2021)
    General Engineering
    ... context; volume; frequency/return periods; runout and velocity. In practice, this is rarely as systematic as it should be, and data are usually scarce. Modeling and simulation is another tool that can be used to estimate some of the rockfall parameters and compensate for the lack of specific data [1]. ...

  • The analysis of the geothermal energy capacity for power generation in Serbia

    Jana Stojković, Goran Marinković, Petar Papić, Mihailo Milivojević, Maja Todorović, Marina Ćuk (2013)
    Renewable Energy, Sustainability and the Environment
    ... et al., Development of the Heating System Using Geothermal Energy, Thermal Science, 10 (2006), 4, pp. 211-218 [6] Milanovi}, P., et al., Dynamic Modeling of ta Heating System Using Geothermal Energy and Storage Tank, Thermal Science, 16 (2012), 3, pp. 947 -953 [7] Fournier, R., Chemical Geothermometers ...

  • Geodynamics of basins above subducted slabs: An integrated modelling study of tectonics, sedimentation, and magmatism in the Timok Magmatic Complex

    Uros Stojadinovic, Marinko Toljic, Branislav Trivic, Radoje Pantovic, Danica Sreckovic-Batocanin, Nemanja Krstekanic, Bojan Kostic, Milos Velojic, Jelena Stefanovic, Nikola Randjelovic, Maja Males (2024)
    Timok Magmatic Complex, Neotethys subduction, basin geodynamics, analogue modelling

  • Fuzzy expert analysis of the severity of mining machinery failure

    Dejan V. Petrović, Miloš Tanasijević, Saša Stojadinović, Jelena Ivaz, Pavle Stojković (2020)
    Mining machinery failure is almost an everyday occurrence. Usually the failures bare certain consequences, which require additional financial costs to repair and restore the system to its operational state. The consequences are viewed through negative and damaging effects a failure has on the machine, health and safety of the employees, work environment, and on the environment. The removal of the consequences of the failure requires additional financial investment, which has a negative impact on the company’s business. In order ...
    Severity of failure, Severity of failure assessment, Mining machinery, Fuzzy sets, Fuzzy logic

  • Моделирање утицаја одступања линије најмањех отпора од пројектоване на интензитет потреса од минирања

    Стефан Милановић (2024)
    Према дефиницији линија најмањег отпора представља најкраће растојање од центра минског пуњења до слободне површине. Oвим истраживањем представљен је утицај линије најмањег отпора, као и њеног одступања од пројектоване на интезитет потреса услед минирања. Проблем линије најмањег отпора је веома заступљен у пракси, где се занемарује изглед слободне површине, који може бити врло неправилан. Линију најмањег отпора је потребно мерити целом дужином минске бушотине према слободној површини, иако је у пракси случај да се мери најчешће као растојање од ...
    линија најмањег отпора, 3D модел, потреси услед минирања, минирање, слободна површина, метода раздвојених елемената

  • Modeliranje disperzije dimnih gasova iz termoelektrane Kostolac B

    Bojan Živanović (2024)
    Bez hrane se može preživeti nedelju dana, bez vode svega nekoliko dana, međutim, bez vazduha se može preživeti najmanje, nekoliko minuta. Pitanje je kakav uticaj na zdravlje čoveka i okoline ima vazduh koji je lošeg kvaliteta, a kojem je skoro celokupno stanovništvo planete izloženo? Ovaj rad se bavi problematikom modeliranja disperzije dimnih gasova iz novog bloka B3 TE ,,Kostolac’’ B. Ključni momenti koji će biti predstavljeni jesu zagađenje, zdravstveni efekti, modeliranje disperzije i analiza dobijenih rezultata korišćenjem programa AERMOD. Analiziran ...
    zagađenje vazduha, podizanje perjanica, modeliranje disperzije polutanata, TE ,,Kostolac B’’
    ... and environment? This paper deals with the problems of modeling of flue gas dispersion from the new station B3 ofthe “Kostolac B” thermal power station. The key parts that are presented are pollution, health effects, dispersion modeling and analysis of the results by using the AERMOD programme ...
    ... regulativom. Ključne reči: zagađenje vazduha, podizanje perjanica, modeliranje disperzije polutanata, TE „Kostolac B"'. Flue gas dispersion modeling from the B3 block of the Kostolac B power plant Abstract 'Without food a man can survive a week, without water only few days. However, a man ...
    ... will be reduced to 50 mg/m?, which is in accordance with the Serbian and EU directive. Key words: air pollution, plume rise, pollutant dispersion modeling, the “Kostolac B” thermal power station SADRŽAJ IB 014601 b VAAAAAA AAAAAA RAAAAAA || 1.1 Cilj modeliranja ... aaana a aaaeaaaaakaNaNoi 3 ...

  • Building Terminological Resources in an e-Learning Environment

    Ranka Stanković, Ivan Obradović, Olivera Kitanović, Ljiljana Kolonja (2012)
    ... Given the variety of applications of RudOnto and in view of the need to secure its functionality within the information system, an UML (Unified Modeling Language) engineering model with a special structure has been developed, whose main features are depicted in Figure 2. Assuming basic familiarity ...

  • An aproach to Implementation of blended learning in a university setting

    Ivan Obradović, Ranka Stanković, Olivera Kitanović, Jelena Prodanović (2011)
    ... analyze the data set individually or in smaller groups, depending of the magnitude of the problem. Some of the exercises contain database and GIS modeling tasks aimed at solving problems related to different topics. For example, this year a student group created a GIS of the FMG building. Students ...

  • Parametri zbijanja komunalnog otpada određeni različitim laboratorijskim metodama

    Jovana M Janković Pantić, Dragoslav R Rakić, Irena G Basarić Ikodinović, Tina D Đurić, Snežana Bogdanović (2021)
    Zbijanje komunalnog otpada predstavlja jednu od osnovnih faza korišćenja komunalne deponije. Zbog toga je kao i kod drugih nasutih građevina, veoma korisno odrediti parametre zbijanja: maksimalnu suvu zapreminsku težinu (dmax) i optimalnu vlažnost (wopt). Dobijeni rezultati mogu da posluže prilikom projektovanja kapaciteta deponije kao i prilikom definisanja obradivosti otpada. U dosadašnjoj praksi najčešći način određivanja parametra zbijanja je standardna metoda (Proktorov opit) koja se koristi u mehanici tla, uz eventualnu redukciju energije zbijanja. Međutim, različiti tretmani komunalnog otpada na ...
    deponija komunalnog otpada, zbijanje, Proktorov opit, malj sa šiljcima
    ... Navcen, B.P.: Geotechnical Properties of Fresh Municipal Solid Waste Landfill in India, 7Ћ lInternational Conference on "Experiments/Process/System/Modeling/Simulation /Optimization, Афепз, Greece Vol. 2017. Pulat H.F., Yukselen-Aksoy Y.: Сотраспоп behavior of synthetic and nmatural MSW хатрјек in ...

  • Primena AHP и WoEmetode u proceni podložnosti terena na kliženje za područje opštine Krupanj

    Biljana Abolmasov, Jelka Krušić, Katarina Andrejev, Miloš Marjanović, Ranka Stanković, Uroš Đurić (2017)
    ... susceptibility ma- pping: Sultan Mountains, SW Turkey. Journal of Asian Earth Sciences 64, pp.180-197, 2013. [23] Regmi NR, Giardino JR, Vitek JD. Modeling sus- ceptibility to landslides using weight of evidence approach: Western Colorado, USA. Geomorpho- logy 115, pp.172-187, 2010. [24] Saaty TL. ...

  • Mine surveying works for the purpose of excavating the remaining reserves of bauxite in the deposit of “Podbracan”

    Aleksandar Milutinović, Aleksandar Ganić, Thamer Rayes Diyab, Rade Tokalić, Meri Ganić (2015)
    ... a la Ingeniería, 2008. (http://nora.nerc.ac.uk/3817/1/EUROENGEO_2008_Kessler_et_al.pdf) QIANG, W. et. alii. An effective method for 3D geological modeling with multi-sour- ce data integration. Computers & Geosciences, n. 31, p. 35-43, 2005. SCHOFIELD, W., BREACH M. Engineering surveying. UK: Elsevier ...

  • Application of the Fuzzy Model in the Evaluation and Selection of Hydraulic Excavators on Open-Pit Lignite Mine

    Stevan Đenadić, Miloš Tanasijević, Vladimir Milisavljević, Dragan Ignjatović, Predrag Jovančić (2021)
    The production of lignite in large open-pit mines is mainly performed with continuously operating equipment, where bucket-wheel excavators, bucket-chain excavators, belt conveyors, and spreaders are the basic machines. Smaller machines, usually of discontinuous operating nature, are commonly categorized as auxiliary machines. This paper presents the research related to the analysis of auxiliary machine parameters with the case study for a hydraulic excavator. The purpose of the analysis was to develop a model of rating quality of service of the ...
    Fuzzy theory, hydraulic excavator, selection, quality of service, asset management