Претрага

Упит dcterms_subject_txt:Industrial and Manufacturing Engineering

2379 items

  • Quality of water in storage reservoirs related to the catchments lithology

    Nikić Zoran, Ristić Ratko, Srećković Batoćanin Danica, Ristović Ivica (2011)

  • Compresibillity parameters of old municipal waste from two landfills in Serbia

    Rakić Dragoslav, Čaki Laslo, Hadži-Niković Gordana, Basarić Irena (2015)

  • Modelling of coal seam of the deposit Đurđevik (BIH) by means of 2D reflective seismic

    Arsenović Siniša, Urošević Milovan, Sretenović Branislav, Cvetkov Vesna, Životić Dragana (2016)

  • Geotehnički uslovi izgradnje nadvožnjaka "Balajnac" na autoputu E-80 deonica: Niš - Merošina

    Dragoslav Rakić, Nikola Božović (2024)
    U sklopu prve deonice autoputa E-80 Niš – Merošina, izgrađen je nadvožnjak u zoni sela Balajnac koji je oslonjen na tri stubna mesta na međusobnom rastojanju od oko 26 m. Svaki stub je fundiran na šipovima i to sa predloženim rasporedom od 2 šipa u grupi na međusobnom rastojanju od 3.6 m. U radu su na osnovu izvršenih geotehničkih istraživanja terena, analizirani rezultati nosivosti vertikalno opterećenog šipa prečnika 1.2 m i dužine šipa od L = 23 m. Analiza ...
    nadvožnjak Balajnac, šip, probno opterećenje šipa, projektni pristup, granična stanja

  • Fragmentation Size Prediction of Blasted Material Using a Specialized Software for Drilling and Blasting

    Stefan Milanović, Nikola Simić, Lazar Kričak, Milanka Negovanović, Nikola Đokić, Miljan Gomilanović (2024)
    Design and optimizing the drilling and blasting parameters, should fill the requirements for the capacity, fragmentation size, and technical characteristics of loading and transport equipment, and enable a safe work at the open pit. Besides mentioned, it also achieves the minimal impact on the environment of the open pit and decreases the negative effects on the environment, especially in the blast vibration and flyrock. To obtain the best possible blasting effects and consider all the factors, a specialized software is ...
    optimization, O-Pitblast, drilling, blasting, fragmentation size

  • Razvoj integralnog modela za optimizaciju diskontinualnog sistema proizvodnje na površinskim kopovima nemetala

    Miodrag Čelebić (2024)
    Izbor optimalne mehanizacije u diskontinualnom sistemu transporta je jedna od najvažnijih odluka koju treba donijeti prilikom projektovanja površinskih kopova. Pri izboru optimalne mehanizacije, uticaj ima veliki broj faktora, kako prirodnih – geoloških i ekoloških, tako i tehničkih, ekonomskih i socijanih. Neki od njih se mogu izraziti numerički, u određenim mijernim jedinicama, a neki opisno, lingvističkim varijablama, shodno uslovima koji vladaju na rudnim ležištima, a koje karakterišu visok stepen neizvjesnosti i neodređenosti kako prilikom istraživanja, tako i tokom procesa eksploatacije ...
    izbor mehanizacije, tehnologija eksploatacije, diskontinualani sistem, ekspertsko odlučivanje, lingvističke varijable, MCDM, FAHP

  • Mesozoic carbonate rocks in Serbia used as dimension stone

    Vesna Matović, Tijana Vojnović Ćalić (2016)
    The building industry in Serbia uses, to a great extent, imported natural stone for architectural purposes. The significance of local deposits, particularly limestones, is not adequately perceived despite the country’s abundance of these valuable resources. Therefore, this study focuses on Serbia’s Mesozoic carbonate rocks, specifically on the deposits of four selected quarries: Klisura, Skrzut, Struganik, and Tisnica. The quality and prospects of the application of these limestones has not yet been the subject of a detailed, comprehensive investigation. Therefore, ...
    Ukrasni kamen, Mezozoik, Krečnjak, Srbija, Petrografija, Fizičko-mehanička svojstva
    ... is the most important building material in civil engineering; it is used in the architecture of old cities or modern buildings, in monument heritage sites, and in the memorial industry. With regard to its aesthetic properties, workability, and durability, stone is a favourite material of sculptors ...
    ... in Serbia, where limestones were traditionally quarried as dimension stone. The widespread, satisfactory engineering properties confirmed in praxis, and cost-effective exploitation and processing of limestones has resulted in active quarries of dimension stone being opened primarily in the ...
    ... Универзитета у Београду [ДР РГФ] Mesozoic carbonate rocks in Serbia used as dimension stone | Vesna Matović, Tijana Vojnović Ćalić | Bulletin of Engineering Geology and the Environment | 2016 | | 10.1007/s10064-015-0722-0 http://dr.rgf.bg.ac.rs/s/repo/item/0008250 Дигитални репозиторијум Рударско-геолошког ...

  • Laboratory testing of fly ash

    Miloš Šešlija, Aleksandra Rosić, Nebojša Radović, Milinko Vasić, Mitar Đogo, Milovan Jotić (2016)
    Fly ash is one of the most common waste materials created by burning of coal. It is composed of smaller particles, consisting mainly of aluminosilicate glass, mullite and quartz, which are collected by electrostatic separators (filter) of gaseous products arising from the combustion of coal. This paper presents the pozzolanic properties, mechanical properties, chemical and mineral composition of fly ash obtained in the combustion process in a power plant Nikola Tesla A (PPNT A) with the addition of a ...
    chemical composition, fly ash, mechanical properties, mineral properties, pozzolanic properties, X-ray diffraction
    ... of Civil Engineering and Geodesy, Trg Dositeja Obradovica 6, 21000 Novi Sad, Republic of Serbia Tel. +381 65 440 59 00 E-mail: radovicn@drenik.net Milinko Vasić, PhD, Geo. Eng., Full Professor University of Novi Sad, Faculty of Technical Sciences, Department of Civil Engineering and Geodesy, ...
    ... belongs to silicate ash, - fly ash and slag have pozzolanic properties and belong by the test standard SRPS B.C1.018 2001 in Class 5 of pozzolanic materials, but according to standard ASTM classification the investigated ashes belong to artificial-industrial pozzolan of class F. Laboratory testings ...
    ... N.; Radonjanin, V.; Malešev, M. Use of fly ash for embankment construction in road construction with and without binders. // Proceedings of the 5th Int. conference Civil Engineering - Science and Practice / Žabljak, 2014, pp. 1133-1138. Authors’ addresses Miloš Šešlija, MSc, BSc, Civ. ...

  • Application of machine learning for diagnosing the operation of a deep well pump in oil production

    Maja Trikić (2024)
    This paper will thoroughly examine how machine learning can improve the diagnosis of deep well pumps by analyzing the role and function of the pumps, dynamograms, sensor technologies, and diagnostic methods.Our analysis will provide insights into modern techniques and approaches for enhancing the performance and reliability of oil production systems, targeting cost reduction and increased operational efficiency.
    deep well pump, dynamograms, machine learning, diagnostics of operating coditions,Random Forest, XGBoost
    ... they enable accurate measurement of the speed and quantity of fluids or gases passing through a system. Their applications span various sectors such as the energy industry, chemical manufacturing, water supply and sewage, automotive 33 industry, and many others. Flow sensors help in optimizing ...
    ... for detecting issues in submersible pumps, as well as in many industrial, commercial, and scientific applications. These sensors enable precise measurement and control of fluid and gas pressures, which is crucial for identifying and addressing problems in submersible pump systems. Proper operation ...
    ... corrosion, and mechanical impacts. Selecting the right sensor for a particular application depends on the requirements, such as measurement range, accuracy, and resistance to external influences. 5.2. Flow sensor Flow sensors are essential devices in many industrial, commercial, and research ...

  • Моделирање утицаја одступања линије најмањех отпора од пројектоване на интензитет потреса од минирања

    Стефан Милановић (2024)
    Према дефиницији линија најмањег отпора представља најкраће растојање од центра минског пуњења до слободне површине. Oвим истраживањем представљен је утицај линије најмањег отпора, као и њеног одступања од пројектоване на интезитет потреса услед минирања. Проблем линије најмањег отпора је веома заступљен у пракси, где се занемарује изглед слободне површине, који може бити врло неправилан. Линију најмањег отпора је потребно мерити целом дужином минске бушотине према слободној површини, иако је у пракси случај да се мери најчешће као растојање од ...
    линија најмањег отпора, 3D модел, потреси услед минирања, минирање, слободна површина, метода раздвојених елемената

  • The influence of rainfall factors on soil resistance to erosion

    Nikola Živanović, Vukašin Rončević, Carla Ferreira, Milica Kašanin-Grubin, Stevan Ćorluka, Veljko Rupar, Vladimir Čebašek (2024)
    rainfall, rainfall factors, erosion, soil

  • Available technological procedures for capturing CO2 in the industrial and power generation sectors

    Lola Tomić, Vesna Karović Maričić, Dušan Danilović, Branko Leković, Miroslav Crnogorac (2021)
    Climate change is a major environmental issue caused by anthropogenic emissions of greenhouse gases. Capturing CO2 and storing it in suitable geological formations is one of the main technological solutions that can provide mitigation of CO2 emission into the atmosphere. Capturing CO2 represents the first phase in process of carbon capture and storage, and includes the application of various technologies for the separation of CO2 produced in the energy and industrial sectors. There are four main systems for capturing ...
    capturing CO2, power plants, CO2 capture systems, CO2 technologies
    ... includes capturing CO2 produced in the industrial and power sectors, its compression and transportation through pipeline system and injection in different geological formations [2,3]. Capturing CO2 is the most expensive phase in the carbon capture and storage process and it accounts for approximately 75 ...
    ... the industrial and power generation sectors Lola Tomić, Vesna Karović Maričić, Dušan Danilović, Branko Leković, Miroslav Crnogorac Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] Available technological procedures for capturing CO2 in the industrial and power ...
    ... of CO2 produced in the energy and industrial sectors. There are four main systems for capturing CO2 that can prevent releasing CO2 into the atmosphere, such as: capturing from industrial process stream, capturing after combustion, capturing before combustion and capturing CO2 by oxy-fuel. In this ...

  • Overwiew of In-Pit Crushing & Conveying Technology in Open Pit Mines

    Ali Nasirinezhad, Dejan Stevanović, Dragan Ignjatović, Petar Marković (2021)
    The conditions under which contemporary surface mining operations is carried out obviously becoming increasingly complex. In such complex conditions, the optimization of haulage systems as the technological phase with the largest share in the total operating costs, is very important from the aspect of achieving profitability of the mining project. In a large number of cases, the application of traditional haulage systems with trucks (as the most dominant type of haulage in open pit mines) does not lead to ...
    In Pit Crushing and Conveying, IPCC, open pit mining, haulage, optimization, costs saving

  • Određivanje zbijenosti starog komunalnog otpada

    Jovana Janković, Dragoslav Rakić, Irena Basarić Ikodinović, Tina Đurić (2021)
    Bez obzira na savremene tretmane komunalnog otpada u svetu, u Srbiji je i dalje najčešći vid odlaganja na komunalne deponije, pa zbijanje otpada predstavlja jednu od ključnih faza formiranja deponije. Na ovaj način znatno se smanjuje zapremina otpada, ubrzava proces degradacije i produžava radni vek deponije. Zbog toga su geotehničke karakteristike komunalnog otpada prilikom zbijanja, veoma bitne kako u fazi projektovanja tako i u fazi izgradnje deponije i optimizacije prostora. Tu se pre svega misli na maksimalnu suvu zapreminsku ...
    komunalni otpad, deponija, Proktorov opit, optimalna vlažnost, maksimalna suva zapreminska težina

  • Flood protection and water utilization of karst poljes: example of Gatačko Polje, Eastern Herzegovina

    Tina Dašić, Ljiljana Vasić (2020)
    Earth-Surface Processes,Geology, Pollution, Soil Science, Water Science and Technology, Environmental Chemistry,Global and Planetary Change

  • Uticaj utiskivanja gas-lift gasa na prenos mase i toplote

    Branko Grubač (2019)
    Nakon uvođenja kontinualnog gas-lifta, primećen je porast proizvodnje tečnog naftnog gasa, TNG, u postrojenju za preradu gasa, kao jednog od finalnih proizvoda dobijenog iz fluida gaso kondenzatnih i rastvorenog gasa iz naftnih bušotina. Pretpostavljeno je da se prisustvom gas-lift gasa uspostavlja drugačija ravnoteža faza u odnosu na slučaj bez gaslifta, te da je gas-lift gas stripovao propan i butane iz tečne u parnu fazu, što je dovelo do povećanja prinosa TNG-a. Napravljen je model bušotine koja radi u kontinualnom gas-liftu ...
    gas-lift, modelovanje bušotine, prenos mase i toplote, taloženje parafina
    ... Petroleum Technology, Vol. 25, str 607-617, (1973) [73] A. Dukler, M. Hubbard, A model for gas-liquid slug flow in horizontal and near horizontal tubes, Industrial & Engineering Chemistry Fundamentals, Vol. 14, str 337-347, (1975) [74] D. Viswanath, Viscosity of liquids, Springer, (2006) [75] H ...
    ... Kabir, Wellbore heat-transfer modeling and applications, Journal of Petroleum science and engineering, str 179-185, (2012) [41] C. Kabir, A Hasan, Performance of a two-phase gas/liquid flow model in vertical wells, Journal of Petroleum Science and Engineering, Vol. 4, str 273-289, (1990) Doktorska ...
    ... paraffins begins at greater depths and that the amount of deposit is higher in the gas-lift well. Key words: gas-lift, well modeling, mass and heat transfer, paraffin deposition Scientific area: Mining engineering Scientific subfield: Elements of mechanical and energy systems UDC: 536.7:665 ...

  • Debris-flow Susceptibility Assessment in Flow-R: Ribnica River Case Study

    Ksenija Micić, Miloš Marjanović, Biljana Abolmasov (2024)
    Debris flows are among the most dangerous erosional geohazards due to the fast rate of movement and long runout zones. Even though the initiation can be triggered in mountainous areas, inhabited and with steep slopes, their propagation and deposition can endanger not only buildings and infrastructure in the urbanized areas, but also threaten human lives. As these initiation areas usually represent unattainable terrains with rapid vegetation cover development, field observations and aerial photo analysis become high-demanding tasks. Consequently, medium-to-regional ...
    tečenje drobine, Flow-R, procena podložnosti, empirijski model

  • The Importance of Detailed Groundwater Monitoring for Underground Structure in Karst (Case Study: HPP Pirot, Southeastern Serbia)

    Marina Čokorilo Ilić, Ana Mladenović, Marina Ćuk, Igor Jemcov (2019)
    Geography, Planning and Development,Aquatic Science,Biochemistry,Water Science and Technology
    ... P. Tunnelling and mining in karstic terrane; an engineering challenge. In Geotehnical & Environmental Applications of Karst Geology & Hydrology; Beck, B.F., Herring, J.G., Eds.; CRC Press: Boca Raton, FL, USA, 2001; pp. 3–12. ISBN 90-5809-190-2. 2. Milanovic, P. Geological Engineering in Karst; Ene ...
    ... Standardization Committee, Concrete—Part 1: Specification, Performance, Production and Conformity, EN 206-1; NSAI: Northwood, Dublin, Ireland, 2002. 14. California Department of Transportation; Materials Engineering and Testing Services; Cossosion Technology Branch. Corrosion Guidelines; The California ...
    ... constructed by standard excavation (first and last parts) and tubing (1/4 and 3/4) with concrete lining (Figure 1). Three observation wells, PP-1, PP-3 and PP-4, were deep-drilled along the tunnel and the screens installed within the tunnel zone. The HPP has a gravity dam and is usually operated 4–5 h/day. Surface ...

  • A multi-criteria approach for assessing the potential of renewable energy sources for electricity generation: Case Serbia

    Boban Pavlović, Dejan Ivezić, Marija Živković (2021)
    When assessing the potential of renewable energy alternatives for electricity generation, it is necessary to implement a multi-perspective approach that includes economic, technical, environmental, and socio-political criteria. For the evaluation of criteria and alternatives, the Fuzzy Analytical Hierarchy Process (FAHP) method is applied. The obtained weights are formed according to the values of energy indicators and expert judgments. The use of a fuzzy numerical value scale for the assessment of expert judgments and energy indicators provides a more sensitive ...
    Proizvodnja električne energije, Obnovljivi izvori energije, Višekriterijumsko odlučivanje, Srbija
    ... When assessing this negative impact on the environment, it is important to evaluate RESs from a lifecycle perspective and to consider emissions in the fuel chain and the manufacturing of the energy conversion technology. Indicator ‘‘Lifecycle GHG emissions per unit of final energy delivered’’ (IPC, 2014) ...
    ... impact on the calculation of the technical potential of 7 https://www.sciencedirect.com/topics/engineering/pairwise-comparison B. Pavlović, D. Ivezić and M. Živković Energy Reports xxx (xxxx) xxx Table 12 The priority of RESs regarding the socio-political criterion C4 . C4 A1 A2 A3 A4 W-SC1 0.0793 0 ...
    ... To compare M1 and M2, it is needed to calculate both the values of V(M1≥ M2) and V(M2≥ M1). The degree possibility for a convex fuzzy number to be greater than k convex fuzzy numbers Mi (i = 1,2, . . . , k) can be defined: V (M ≥ M1,M2, . . . ,Mk) = V [(M≥M1) and (M ≥ M2) and . . . and (M ≥ Mk)] = min ...

  • Synthesis and characterization of nanostructured Ca0.9Er0.1MnO3

    Tijana B. Vlašković, Bojana Laban, Maja Milošević, Maria Čebela, Vladimir Dodevski, Milena Rosić (2023)
    ... Pavlović, Aleksandar Oklješa Priprema za štampu i štampa/Prepress and printing Razvojno-istraživački centar grafičkog inženjerstva Tehnološko-metalurškog fakulteta, Beograd / Research and Development Centre of Printing Engineering, Belgrade Tiraž/ Circulation 30 primeraka/ 30 copies printing ...
    ... During this combustion method, sucrose Ci.H»Ori which is both fuel and complexant and metal ions in the form of calcium nitrate tetrahydrate, manganese(II) nitrate hydrate, erbium(III) nitrate pentahydrate were used. Metal nitrates and sucrose were combined to prepare this nanostructured in their ...
    ... structural changes, and specific surface area were investigated. DTA, X-ray diffraction (XRD), FTIR, and Field emission scanning electron microscopy (SEM) were used to characterize the synthesized samples at room temperature. This work was funded by the Ministry of Education, Science and Technological ...