Претрага

Упит dcterms_subject_txt:Language and Linguistics

2343 items

  • Development of a petrographic classification system for organic particles affected by self-heating in coal waste. (An ICCP Classification System, Self-heating Working Group – Commission III)

    M. Misz-Kennan, J. Kus, D. Flores, C. Avila, Z. Büçkün, N. Choudhury, K. Christanis, J.P. Joubert, S. Kalaitzidis, A.I. Karayigit, M. Malecha, M. Marques, P. Martizzi, J.M.K. O'Keefe, W. Pickel, G. Predeanu, S. Pusz, J. Ribeiro, S. Rodrigues, A.K. Singh, I. Suárez-Ruiz, I. Sýkorová, N.J. Wagner, D. Životić (2020)
    Self-heating of coal waste is a major problem in the leading coal-producing and consuming countries, independent of the recent or past coal exploitation history. The phenomenon of self-heating is dependent on many factors such as the properties of organic matter (maceral composition and rank), moisture and pyrite content, climate effects, and storage conditions (shape of the dump or compaction of the coal waste). Once deposited, coal waste undergoes oxidation, which can lead to self- heating with the overall temperatures ...
    Stratigraphy,Economic Geology,Geology,Fuel Technology

  • VENTEX: An Expert System for Mine Ventilation Systems Analysis

    Ranka Stanković, Nikola Lilić, Ivan Obradović (1996)
    Analiza sistema za ventilaciju je komleksan proces, koji bazira na proračunu brojnih parametara, koji se odnose na: stanje mreže, provetrenost, stabilnost sistema, gubitke vazduha, klimatske uslove, gasno stanje, ugroženost od požara i opasne prašine. Navedeni problemi se uspešno rešavaju paketom SimVent, ali potpuno razumevanje i korišćenje dobijenih rezultata zahteva angažovanje iskusnog specijaliste iz oblasti ventilacije. Rešenje je nađeno u kreiranju ekspertnog sistema VENTEX, čija je baza znanja formalizacija ekspertskog znanja iz oblasti ventilacije rudnika. U radu je prikazana metodologija ...
    ekspertni sistem, ventilacija
    ... facts and heuristics which can be represented by means of rules, frames, semantic networks and other formalisms. Since knowledge is the key factor in problem solution and decision making, the quality and usability of an expert system is basically determined by the accuracy and completeness ...
    ... developed at the Faculty of Mining and Geology of the University of Belgrade (Lilić, Stanković, and Obradović, 1994). This package, which enables the simulation of air flow distribution in a mine, the heat and fire transmission mechanisms, distribution of gas and distribution of respirable mineral ...
    ... KAPPA-PC Object Browser for VENTEX The classes and objects of the modified OOA model shown in /Fig. 1/ were transformed to classes and instances in the KAPPA-PC system. Thus the classes and object from /Fig. 1/ are represented by KAPPA-PC classes and instance as shown in the system’s object browser ...

  • Polyhedral characteristics of the cosalite-type crystal structures

    Sabina Kovač, Predrag Dabić, Aleksandar Kremenović, Aleksandar Pačevski, Ljiljana Karanović, Marko V. Rodić, Martina Tribus (2019)
    kristalna struktura, kozalit, poliedarske karakteristike

  • Development of integrated fuzzy model for mine management optimization

    Miodrag Čelebić, Sanja Bajić, Dragoljub Bajić, Dejan Stevanović, Duško Torbica, Vladimir Malbašić (2023)
    fuzzy logika, višekriterijumsko odlučivanje, ocenjivanje eksperata
    ... inherent uncertainties, vagueness, and inaccuracies. As a result, subjective evaluation by engineers and expert experience have become increas- ingly important. Given that the natural language used by miners and geologists is most suited for relaying: knowledge and expressing; opinions, the paper ...
    ... Ko – safe and healthy work environment, Ky - extractable ore reserves, and K+ — coefficient of ore de- pletion. The considered mining: technology options, based on the natural setting, included: Ai — block caving, Ao — sublevel caving, A3 — cutting and filling, and Aa – room and pillar mining ...
    ... underlying: and overlying, limestones. The underlying limestones are solid homo- geneous rocks, with numerous fractures and a number of fault zones. Expert experience suggested potential problems for certain types of mining. operations. Additionally, also based on experience and the physical and mechanical ...

  • Petrographical and organic geochemical study of the subbituminous coal from the Dubrava field, Aleksinac basin (Serbia)

    Željana Sekulić, Ksenija Stojanović, Achim Bechtel, Reinhard Sachsenhofer, Miomir Petrović, Ivan Kojić, Dragana Životić (2019)
    ... parts of the Main coal seam and coal layers within and under lower oil shale package. Since vitrinite reflectance (%Rr, 0.44 + 0.03 - 0.46 + 0.02) and biomarker compositions indicate the same maturity stage of organic matter (OM), corresponding to late diagenesis and early catagenesis, petrographic ...
    ... n (С15-Сг0) and increase of long-chain (Cz6-Ca3) homologues. The obtained results suggest lowering of the water table during the formation of the Main coal seam. This change resulted in lesser inundation and deposition of MM associated with smaller input of bacterial and algal OM and higher contribution ...
    ... proxies and stable carbon isotope ratios (6'3) of individual biomarkers were used to evaluate the origin and depositional environment of OM. The content of vitrinite group macerals increases from top to bottom of the Main coal seam which is associated with a notable decrease of liptinite and mineral ...

  • Investigating distant effects of the Moesian promontory: Brittle tectonics along the western boundary of the Getic unit (East Serbia)

    Ana Mladenović, Milorad D. Antić, Branislav Trivić, Vladica Cvetković (2019)
    In this study, we report evidence for brittle deformation in a part of the Carpatho–Balkan orogen, which is explained in terms of effects of the rigid Moesian promontory of the European plate on fault kinematics in East Serbia. We focus on the westernmost part of the Getic Unit of the East Serbian Carpatho–Balkanides, i.e. the Gornjak–Ravanica Unit, located between two main thrusts that were repeatedly activated from Early Cretaceous to recent times. We combine a new data set on ...
    Getikum, Mezijska jedinica, Karpato-balkanski orogen, krte deformacije, Gornjačko-ravanička jedinica

  • Evaluation And Perspectives Of Underground Coal Mines In Serbia

    Vladimir Milisavljević, Milena Lekić, Ivica Ristović, Vojin Čokorilo, Aleksandar Cvjetić (2017)
    ... roof and floor conditions, rock pressure and geo-mechanic conditions (criteria C2); • Mining hazards, such as gas, water, dust and potential for gas outbursts and spontaneous combustion (criteria C3); • Potential for mechanization, such as seam inclination, seam thickness, floor and roof ...
    ... facilities and supply facilities (criteria C4); • Quality of coal and products, such as coal type, sulphur content, ash content, moisture content, calorific value and amount of fines (criteria C5); • Market and delivery possibilities, such as current markets served, the distance to the market and transport ...
    ... (Soko, Strmosten pit in REMBAS mine, Lubnica and Štavalj) and for closure of those mines without potential (Tadenje and Jarando pits of Ibarski mines, Senjski rudnik pit of REMBAS, Bogovina and Vrška Čuka). This approach leaves Jasenovac mine and Block IV pit of REMBAS mine in between these two ...

  • Fuzzy expert analysis of the severity of mining machinery failure

    Dejan V. Petrović, Miloš Tanasijević, Saša Stojadinović, Jelena Ivaz, Pavle Stojković (2020)
    Mining machinery failure is almost an everyday occurrence. Usually the failures bare certain consequences, which require additional financial costs to repair and restore the system to its operational state. The consequences are viewed through negative and damaging effects a failure has on the machine, health and safety of the employees, work environment, and on the environment. The removal of the consequences of the failure requires additional financial investment, which has a negative impact on the company’s business. In order ...
    Severity of failure, Severity of failure assessment, Mining machinery, Fuzzy sets, Fuzzy logic

  • Demise of the Wetterstein Carbonate Platform and onset of the Dachstein Carbonate Platform recorded in deep-water successions of the East Bosnian-Durmitor megaunit (Pliješevina, northern Montenegro, Dinarides)

    Milica Mrdak, Eva Wagerer, Milan Sudar, Nevenka Djerić, Martin Đaković, Hans-Jürgen Gawlick (2024)
    Triassic, Carnica event, clay mineralogy, conodont biostratigraphy, Neo-Tethys

  • GNSS Time Series as a Tool for Seismic Activity Analysis Related to Infrastructure Utilities

    Sanja Tucikešić, Ankica Milinković, Branko Božić, Ivana Vasiljević, Mladen Slijepčević (2021)
    GNSS, Time series, Seismic deformations, Earthquake, Infrastructure utilities

  • The Usage of Various Lexical Resources and Tools to Improve the Performance of Web Search Engines

    Krstev Cvetana, Stanković Ranka, Vitas Duško, Obradović Ivan (2008)
    In this paper we present how resources and tools developed within the Human Language Technology Group at the University of Belgrade can be used for tuning queries before submitting them to a web search engine. We argue that the selection of words chosen for a query, which are of paramount importance for the quality of results obtained by the query, can be substantially improved by using various lexical resources, such as morphological dictionaries and wordnets. These dictionaries enable semantic ...
    LR web services, MultiWord Expressions & Collocations, Information Extraction, Information Retrieval
    ... the Serbian language ć, č, š ,ž ,đ, dž, lj and nj, are internally coded as cx, cy, sx, zx, dx, dy, lx and nx, respectively) 222 Figure 2. Semantic expansion of a query The query, now composed of two Latin and two Cyrillic strings was then submitted by WS4QE to Google and, as a result ...
    ... such as morphological dictionaries and wordnets. These dictionaries enable semantic and morphological expansion of the query, the latter being very important in highly inflective languages, such as Serbian. Wordnets can also be used for adding another language to a query, if appropriate, thus making ...
    ... possible synonyms – indijanski and amerindski – in all inflectional forms (amerindijanskog, indijanskog, amerindskog, etc.), but also for the occurrences of the specific languages belonging to that language class, for instance, atakapa, mozan, tupi-gvarani and many others that are derivationally ...

  • Models of Determining the Parameters of Rock Mass Oscillation Equation with Experimental and Mass Blastings

    Suzana Lutovac, Branko Gluščević, Rade Tokalić, Jelena Majstorović, Čedomir Beljić (2018)
    ... destruction, and part of energy, in the form of seismic wave, is lost in the rock mass causing rock mass oscillation. Investigations of the character and behavior of the pattern of seismic wave indicate that the intensity and nature of the seismic wave are influenced by rock mass properties, and by blasting ...
    ... vN and appropriate reduced distances R1, R2, ..., RN and having in mind relations (22) and (27), we will calculate the value of ST according to Equation (29). For each pair (xi, yi + 3) from Equation (35), we will determine the Minerals 2018, 8, 70 8 of 18 parameters Ai, i = 1, 2, ..., N, and in ...
    ... 0;3, as Well as the difference between recorded and calculated rock mass oscillation velocities for models 1, 2 and 3. Minerals 2018, 8, 70 17 of 18 Table 7. Survey of recorded and calculated rock mass oscillation velocities for models 1, 2 and 3. No. R vr (cm/s) vi1 (cm/s) vi2 (cm/s) vi3 (cm/s) ...

  • BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1) Composites Synthesized by Thermal Decomposition: Magnetic, Dielectric and Ferroelectric Properties

    Marija Šuljagić, Ivan Petronijević, Miljana M. Mirković, Aleksandar Kremenović, Adis Džunuzović, Vladimir B. Pavlović, Aleksandra Kalezić-Glišović, Ljubica Andjelković (2023)
    To investigate the influence of spinel structure and sintering temperature on the functional properties of BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface from acetylacetonate precursors. As-prepared powders were additionally sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the detailed examination of phase composition and morphology. The magnetic, dielectric, and ...
    ferroelectric, dielectric properties, magnetic properties, titanate/ferrite composites, phase composition
    ... surface and processing of obtained structures into dense ceramics. The effect of structural properties and phase composition, as well as two sintering; schedules on dielectric and ferroelectric properties of synthesized ceramic composites, was studied and explained in detail. 2. Results and Discussion ...
    ... , LP., M.M.M., A.D., A.K., V.B.P, A.K.-G. and L.A.; Resources, M.Š., LP., M.M.M., A.D., A.K., V.B.P, A.K.-G. and L.A.; Writing—Original Draft, MŠ. and L.A.; Writing—review and editing, MŠA., V.B.P.and L.A.; Supervision, L.A. All authors have read and agreed to the published version of the manuscript ...
    ... additionally sintered at 1150 "C and 1300 "C. X-ray powder diffraction (XRPD) and scanning, electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the detailed examination of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were ...

  • 2D geoelectrical resistivity tomography application at the former city waste dump "Ada Huja": Eco-geological problem

    Branislav Sretenović, Filip Arnaut, Ivana Vasiljević, Vesna Cvetkov (2019)
    2D inversion, geoelectrical method, Wenner array, ecology, Ada Huja
    ... carbon-dioxide and hydrogen. The last phase is methane production by methanogenic bacteria which either dissolve those acids into methane and carbon-dioxide or reduce carbon-dioxide with hydrogen (Themelis and Ulloa, 2006). Looking at the research done by the Environmental and Energy Study Institute ...
    ... M.H. (2004) Tutorial: 2-D and 3-D electrical imaging surveys. Geotomo Software, Res2dinv 3.5 Software. MARKOVIĆ, J. and STEVOVIĆ, S. (2016) The process of creation and analysis of the landfill gas from the landfill in the region of Pchinja. Journal on Processing and Energy in Agriculture, 20 ...
    ... Scientific Research and Reports, 8 (6), pp. 1-13. SRETENOVIĆ, B. (1998) Report on the geoelectrical survey conducted at the former waste dump site ar Karaburma. Faculty of Mining and Geology, Geotechnical Institute, Belgrade. SUPAWEE, M. and WANLOP, H. (2014) Rheological and mechanical properties ...

  • New data on the age of an Upper Cretaceous clastic-carbonate succession in Brežđe (Western Serbia)

    Nevenka Đerić, Nataša Gerzina (2014)
    Gornja kreda, radiolarije, Jadar blok, zapadni pojas Vardarske zone, zapadna Srbija
    ... housed at the Faculty of Mining and Geology in Belgrade (registration numbers BR 1/1, BR 1/2 and BR 1/3). 4.SECTION DESCRIPTION AND BIOSTRATIGRAPHY Inthe wider area of Brežđe, MARKOVIĆ & ANĐELKOVIĆ (1953) distinguished Albian-Cenomanian, Cenomanian, Turo- nian and Senonian sediments. According ...
    ... G, 1996). 5. DISCUSSION AND CONCLUSIONS After the Late Jurassic obduction and subsequent erosion in the Dinaridic-Hellenic belt, Cretaceous synorogenic basins were formed and filled with clastic material composed of variable amounts of ophiolitic, terrigenous and carbonate detritus (LUŽA ...
    ... sediments - ggr“gngg mćlange and Miocene dacite Cretaceous sediments - gg:)%()szigc and Triassic Paleozoic granite <= snnistal strike-slip fault == Dextal strike-slip fault —— Pre-Senonian thrust — — Post-Senonian thrust — 7Majorsyncline = Major anticline Figure 2:A simplified and modifted geological ...

  • Influence of DEM resolution on numerical modelling of debris flows in RAMMS - Selanac case study

    Jelka Krušić, Biljana Abolmasov, Mileva Samardžić Petrović (2019)
    Debris flows induced by intensive rainfall represent very hazardous phenomena in many parts of the World. Methods for prediction of runout distance of flow like mass movements are different and depending on the input data, rheology, and available or appropriate numerical solution. However, sometimes it is not easy to obtain pre event and post event high-resolution data in the rural or mountainous area. Thus, the topology of terrain is the most important input parameter for the every real case ...
    tecišta, modeliranje, RAMMS, DEM
    ... Federal Institute for Forest, Snow and Landscape Research (WSL, Birmensdorf) and the Swiss Federal Institute for Snow and Avalanche Research (SLF, Davos). The mass balance equation incorporates the field variables flow height H (x, y,t) and flow velocity U (x, y,t) and is given by: 𝑄(𝑥, 𝑦, ...
    ... source zone (30m), and length of about 1.5km. First results were made using 30x30m DEM as input, and another with much more precise 5x5m DEM. New UAV scanning of post event topology was obtained in 2017 and additionally had helped in defining precise dimension of release, erosion and deposition zones ...
    ... mass production source term, and Ux and Uy represent the depth- averaged velocities in horizontal directions x and y (Christen et al., 2010 Frank et al 2017). The depth- averaged momentum balance equations account for the conservation of momentum in two directions x and y: 𝑆𝑔𝑥 − 𝑆𝑓𝑥 = ...

  • Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites

    Marija Šuljagić, Aleksandar Kremenović, Ivan Petronijević, Adis Džunuzović, Miljana Mirković, Vladimir Pavlović, Ljubica Anđelković (2023)
    To investigate the effect of synthesis procedure and sintering temperature on the functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS). The dielectric and ferroelectric measurements were performed in detail. Generally, the ...
    Perovskite/spinel ceramics, Multiferroic, Sintering, Influence of synthesis method

  • Environmental Energy Security Indicators as Tools for Environmental Protection

    Aleksandar Madžarević, Dejan Ivezić, Marija Živković , Miloš Tansijević (2019)
    Еколошка прихватљивост је постала незаменљив синтезни показатељ сваке валидне енергетске анализе у последње две-три деценије. Енергетска безбедност је у директној хармонији с еколошком прихватљивошћу кроз многе прописане политичке циљеве, економске користи, правне тековине итд. Индикатори еколошке сигурности представљају један од основних елемената за одређивање енергетске безбедности и снажне алате за усмеравање енергетског сектора ка одрживом развоју. У овом раду, анализа је била концентрисана на показатеље енергетске безбедности у области животне средине који се односе на сектор природног гаса у ...
    енергетска безбедност, еколошки енергетски индикатори, заштита животне средине, еколошка прихватљивост
    ... investments and develop markets. Energy security is one of the most important indicators in determining the current state and defining the future development. Bearing in mind that demand for energy in the South East Europe is growing, and that supply sources are increasingly limited and unevenly ...
    ... security is one of the most important indicators in determining the current energy and economic situation and orienting the future development. Considering that energy demand is increasing, and supply sources become limited and unevenly distributed, the energy security is becoming an essential indicator ...
    ... logic and the fuzzy conclusion considering energy, economic, ecological and social indicators. If the goal of the model is to decide on a scenario assessment that would demonstrate a rational, sustainable and energy-friendly development plan, technical or energy, political, economic and environmental ...

  • Low-temperature phase transition and magnetic properties of K3YbSi2O7

    Predrag Dabić, Volker Kahlenberg, Biljana Krüger, Marko Rodić, Sabina Kovač, Jovan Blanuša, Zvonko Jagličić, Ljiljana Karanović, Václav Petříček, Aleksandar Kremenović (2021)
    alkalni silikati elemenata retkih zemalja, fazni prelazi, magnetne karakteristike, razdvajanje kristalnog polja, silikati lantanica
    ... crystal structures of �-K3YbSi2O7 and �0- K3YbSi2O7, the phase transition and the observed twinning are presented in Sections 3.1 and 3.2. The most relevant information about data collections and refinements is compiled in Table 2. Selected bond lengths, bond angles and research papers 586 P. Dabić ...
    ... crystal structures of 6-K3;YbSi,0, and ’- K;YbSi,O,, the phase transition and the observed twinning are presented in Sections 3.1 and 3.2. The most relevant information about data collections and refinements is compiled in Table 2. Selected bond lengths, bond angles and Experiments were carried out with ...
    ... using crystal faces. 3. Results and discussion 3.1. Single-crystal X-ray diffraction and description of the structures As representatives for the description of �- and �0- K3YbSi2O7, the structures determined from the data collec- tions for crystal 1 at 298 and 100 K were used, respectively. Both ...

  • Mapping and classifying large deformation from digital imagery: application to analogue models of lithosphere deformation

    Taco Broerse, Nemanja Krstekanić, Cor Kasbergen, Ernst Willingshofer (2021)
    kontinentalna tektonika: kompresija, kontinentalna tektonika: ekstenzija, kontinentalna tektonika: transkurentni i transformni rasedi, pukotine, rasedi, zone snažnih deformacija, kinematika deformacija kore i omotača, teorijska mehanika, modelovanje
    ... plane, in terms of magnitude and sign, we can define a range of types of strain end-members: (a) isotropic area increase: ǫmax = ǫmin and ǫmax > 0 and ǫmin > 0, (b) uniaxial extension: ǫmax > 0 and ǫmin = 0, (c) strike-slip (simple shear): |ǫmax| = |ǫmin| and ǫmax > 0 and sign(ǫmax) = −sign(ǫmin), (d) ...
    ... ǫmax < 0 and ǫmin = 0 (e) isotropic area decrease: ǫmax = ǫmin and ǫmax < 0 and ǫmin < 0 The strain type � is a continuous scale, and within a tectonic context we can expect intermediate, oblique, strain types, notably transtension as an intermediate case between strike-slip and extension; and transpression ...
    ... tensor of choice. U and V are related to the Cauchy-Green deformation tensors (eq. 23) by: U = √ C V = √ B (29) U and V have the same principal values λi, and these are related to the principal values μi of C and B by λi = √ μi . The direction of the principal axes of U and V are however different ...