Претрага

Упит dcterms_subject_txt:Atomic force microscopy

157 items

  • Influence of Post-Synthesis Treatments on the Properties of Brushite/Monetite Powders

    Željko Radovanović, Lidija Radovanović, Aleksandar Kremenović, Đorđe Janaćković, Rada Petrović (2022)
    Dicalcium phosphate (DP) materials, of which brushite and monetite were the most known, have been intensively studied for several decades because of excellent resorptive and osteoconductive properties that can satisfy the requirements needed for various medical applications, such as bone cements, coatings of metallic implants and bone grafts ...

  • Phase and microstructural study of urinary stones

    Miljana Mirković, Anja Dosen, Suzana Erić, Predrag Vulić, Branko Matović, Aleksandra Rosić (2019)
    In this paper we present the phase and morphological characteristics of urinary stones from Serbian patients. The study included for the first time the determination of the phase composition and a statistical analysis of the presence of different types of urinary stones in both men and women in Serbia. The main goal of study was representation of collected data for the first time. For past three years, more than 600 samples were collected from Serbian patients. The phase composition ...
    бубрежно камење, фазни састав, статистика, рендгенска дифракција праха, скенирајућа електронска микроскопија

  • Gold and Silver in Serbia

    Jelenković Rade (2011)

  • Possible problems in mining industry of Serbia

    Jelenković Rade (2012)

  • Geological Exploration of Mineral Resources in Serbia and Reporting

    Jelenković Rade (2013)

  • Understanding a volcanic history of SW part of Lece Volcanic Complex from plagioclase composition, zircon geochemistry and U-Pb age

    Bojan Kostić (2019)

  • А brief review on the geophysical model of Еast Vardar ophiolites: Serbia, North Macedonia and Greece

    Dragana Đurić (2022)

  • Investigation of Co0.9Ho0.1MoO4 Nanopowders Obtained by Glycine Nitrate Procedure

    Milena Rosić, Maja Milošević, Maria Čebela, Vladimir Dodevski, Vesna Lojpur, Radomir Ljupković, Aleksandra Zarubica (2023)
    ... Crystallography, Petrology and Geochemistry, Faculty of Mining and Geology, University of Belgrade, Đušina 7, 11000 Belgrade, Serbia “ Department of Atomic Physics, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, University of Belgrade, P.O. Box 522, 11001 Belgrade ...
    ... have been studied by DTA, X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectra, Spectroscopy, Field emission scanning electron microscopy (FESEM), and nitrogen adsorption method. The photocatalytic activity of acquiring CoooHoo.MoO+4 nanopowders was estimated by the photocatalytic ...
    ... potentially i promising solution in photocatalytic processes toward green chemistry and sustainable development. Keywords: X-ray diffraction, Electron microscopy, Nanostructured materials -– 23- ...

  • Microstructural and magnetic properties of electrospun hematite/cuprospinel composites

    Mira Ristić, Aleksandar Kremenović, Michael Reissner, Željka Petrović, Svetozar Musić (2020)
    Phase composition, microstructural and magnetic properties of electrospun hematite/cuprospinel composites were investigated. Samples were synthesized starting with 0 to 10 mol% of copper relative to iron. The round shape of reference electrospun fbres was preserved upon their heating up to 600 °C in air, whereas at 700 °C hollow substructure was additionally formed. In these reference samples the presence of hematite phase was detected by XRPD. A small amount (traces) of Fe3O4 /γ-Fe2O3 was also found, due to the ...
    Electrical and Electronic Engineering, Condensed Matter Physics, Atomic and Molecular Physics and Optics, Electronic, Optical and Magnetic Materials

  • Multi-Criteria Approach for Selecting Optimal Dozer Type in Open-Cast Coal Mining

    Ivan Janković, Stevan Đenadić , Dragan Ignjatović , Predrag Jovančić , Tomislav Šubaranović, Ivica Ristović (2019)
    Analitički hijererhijski proces (AHP), dozeri, eksploatacija uglja, površinski kopovi
    ... analysed were: Engine power, towing force, transmission type, and undercarriage type. Taking into account the engine power (EP), the analysed dozers belonged to the group of strong dozers in the range of the 190–300 kW class, and according to the nominal towing force (TF) to the group of heavy dozers ...
    ... transmission type (TT), towing force (TF) and undercarriage type (UT) in the group of technical parameters (TP), respectively, and EPn, TTn, TFn, UTn are weight coefficients for n type of alternative according to sub-criteria engine power (EP), transmission type (TT), towing force (TF) and undercarriage type ...
    ... moderate priority on Saaty scale) because of better balance, greater traction, allowing for a greater percentage of the conversion of power into towing force, etc. 3.2. Economic Parameters (EcP) The second criterion—the economic parameters—is the best indicator of the successful functioning of the entire ...

  • Novi pristup proučavanju tekstura minerala značajnih za istraživanje rudnih ležišta

    Aleksandar Pačevski (2022)
    ... shift in the study of minerals and their textures to nanometer and even atomic levels, which certainly offers great opportunities, but at the mean time makes a research very complex. Scanning and Transmission Electron Microscopy (SEM and TEM) methods in combination with Electron Microprobe Analysis ...
    ... for investigating not only deposit genesis, but also possibilities and efficiency of their exploitation. With the development of polarized light microscopy as the basic methods of minerals, ores and rocks study, numerous textural relationships of minerals have been determined and clearly defined, such ...
    ... replacements, etc, which have significantly contributed to the understanding of origin of minerals and ore formation. It can be said that ore microscopy, as a separate discipline of the polarized light microcopy, reached its peak in the middle and second half of the XX century, where the contribution ...

  • Non-Detonating Chemical Mixture for Non-Invasive Methods of Rock Breaking

    Lazar Kričak, Milanka Negovanović, Nikola Simić, Stefan Milanović (2024)
    Within the Innovation developed several different non-detonating chemical mixtures for non-invasive methods of rock breaking. Laboratory and polygon tests gave the satisfactory results and knowledge enough to start the practical experiments in the field. The basis of this innovation is a theoretical assumption that certain chemical mixtures release a large quantity of gases during combustion. If these gases are found in the enclosed space a growing pressure on the walls of the chamber in which combustion takes place will ...
    non-detonating, chemical mixture, rock breaking, borehole pressure

  • Design of a sucker rod pumping system

    Ana Ponoćko (2024)
    For a long time in the history of oil production, sucker rod pumps have been the first and in many cases the only choice when it comes to mechanical extraction methods. Proper selection of each individual element of the system enables optimization, which entails benefits in the form of increased efficiency and reduced costs. The first part of the paper presents the underground and surface equipment of the rod pump and describes the operation of the entire system. The ...
    sucker rod pump, fluid production, mechanical extraction methods,, Prosper, QROD, RODSTAR
    ... forces act on the downhole components: 1. Buoyant Force (Archimedean Force) This force acts on the rod strings and reduces their weight. 2. Static Force: Due to the weight of the rod strings, tubing, and the weight of the fluid. 3. Elastic Force: Due to the elasticity of the rod strings and the ...
    ... valves and compresses the fluid inside the cylinder, resulting in an increase in pressure within the pump. The reverse flow and pressure increase force the standing valve to close, and the compression cycle continues until the pressure within the cylinder exceeds the pressure above the traveling ...
    ... wells due to the mechanical locking that makes it less likely to become dislodged from the seat. The "cup" type provides the necessary holding force solely through mechanical friction. Shaped plastic cups are used to create 20 friction within the seat. They have lower resistance to displacement ...

  • Burnishing Versus Smoothing In Ceramic Surface Finishing: A Sem Study

    Ionescu Corina, Volker Hoeck, Crandell Otis N., Šarić Kristina (2014)
    From the Neolithic up to the present, people have used various methods to improve the surface of ceramic objects. In this study, we look specifically at smoothing and pattern burnishing of ceramics produced today by traditional methods. Optical microscopy and SEM show specific surface changes. Smoothing results in an irregular surface, which causes diffused reflection of light. Burnishing produces an even and compact surface, which causes specular reflection and lustre. The results can be used to infer methods of ...

  • Manganese-pyromellitate complex as a precursor for preparation of spinel Mn3O4

    Lidija Radovanović, Željko Radovanović, Aleksandar Kremenović, Bojana Simović, Milica V. Vasić, Jelena Rogan (2022)
    In recent years, thermal decomposition studies of transition metal complexes with benzenepolycarboxylate ligands have become an area of a great importance due to the possibility of obtaining useful metal oxides with desirable electrical, magnetic and catalytic properties [1]. As a contrast to conventional methods for the preparation of metal oxides, such as hydrothermal or sol–gel treatment, thermolysis is faster, more efficient ...

  • Regional Strike-Slip Structures in the Internal Dinarides: Insights from the Zvornik Fault

    Ana Mladenović, Violeta Gajić, Kristijan Sokol, Dejan Prelević (2024)

  • Influence of Ag doping on the morphological and magnetic properties in CuO nanopowders

    Maria Čebela, Uroš Čakar, Vesna Lojpur, Maja Milošević, Sanja Krstić, Vladimir Dodevski, Milena Rosić (2023)
    ... magnetic properties in Cu, „Ag,O. The size and morphology of the particles were successfully determined by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). 1. T. Kimura, Y. Sekio, H. Nakamura, T. Siegrist, A.P. Ramires, Nafture Mater., 7 (2008) 291. 2. J. Hellsvik, M. ...

  • Cyanobacterial diversity and toxicity of biocrusts from the Caspian Lowland loess deposits, North Iran

    Tamara Dulić, Jussi Meriluoto, Tamara Palanački Malešević, Violeta Gajić, Tamara Važić, Nada Tokodi, Igor Obreht, Bojan Kostić, Petar Kosijer, Farhad Khormali, Zorica Svirčev (2016)
    Biocrusts and adjacent sediments were collected from the so-called loess plateau of Northern Iran and the loess deposits on the foothills of Alborz Mountains. The mineralogical and granulometric analyses characterized sediments as quartz-rich clayey or sandy silts. Cyanobacterial diversity, colony morphology and grain stabilization were studied by light and scanning electron microscopy, which showed glue-like layers of cyanobacterial EPS and dense networks of filamentous cyanobacteria immobilizing finer and bigger grains, respectively. Amorphous, tuft and globular cyanobacterial colony structures were also detected. 15 cyanobacterial genera were ...
    Biokore, Cijanobakterije, Diverzitet, Cijanotoksini, Stabilizacija sedimenata, Les

  • Synthesis of MnCo2O4 nanoparticles as modifiers for simultaneous determination of Pb(II) and Cd(II)

    Vesna Antunović, Marija Ilić, Rada Baošić, Dijana Jelić, Aleksandar Lolić (2019)
    The porous spinel oxide nanoparticles, MnCo2O4, were synthesized by citrate gel combustion technique. Morphology, crystallinity and Co/Mn content of modified electrode was characterized and determined by Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), X-ray diffraction pattern analysis (XRD), simultaneous thermogravimetry and differential thermal analysis (TG/DTA). Nanoparticles were used for modification of glassy carbon electrode (GCE) and new sensor was applied for simultaneous determination of Pb(II) and Cd(II) ions in water samples with the ...
    MnCo2O4 nanočestice, modifikatori, određivanje Pb (II) and Cd(II)

  • Hydrochemistry of groundwater contaminated by petroleum hydrocarbons: the impact of biodegradation (Vitanovac, Serbia)

    Nenad Marić, Jana Štrbački, Sanja Mrazovac Kurilić, Vladimir P. Beškoski, Zoran Nikić, Snežana Ignjatović, Jovana Malbašić (2020)
    Aquifer contamination by petroleum hydrocarbons leads to measurable changes of groundwater hydrochemistry, primarily due to the microbiological activity. This study analyzes this phenomenon at an historical kerosene-contaminated site in Vitanovac (central Serbia). Due to the long-term hydrocarbon contamination and exposure to aerobic and anaerobic biodegradation mechanisms, the lowest concentrations of O2, NO3−, and SO42− (electron acceptors) and the highest concentrations of Mn and Fe (products of microbial metabolic activity) overlap. The terminal redox-accepting processes in groundwater ranged from oxygen ...
    podzemne vode, hidrohemija, zagađenje, naftni ugljovodonici, biodegradacija