Претрага

Упит dcterms_subject_txt:Control and Systems Engineering

2388 items

  • Development of terminological resources for expert knowledge: a case study in mining

    Ljiljana Kolonja, Ranka Stanković, Ivan Obradović, Olivera Kitanović, Aleksandar Cvjetić (2015)

  • Adaptive neuro-fuzzy prediction of operation of the bucket wheel drive based on wear of cutting elements

    Filip Miletić, Predrag D. Jovančić, Milos Milovančević, Dragan Ignjatović (2020)
    The capacity of the rotor excavator depends largely on the operation of the subsystem for digging. There is a great contribution to the correct and sharp teeth when the capacity is the highest. In the function of time, the teeth become clogged due to abrasive wear, or changes in their geometric shape. To analyze the bucket wheel drive in depend on wear of the cutting elements in this study adaptive neuro fuzzy inference system (ANFIS) approach was implemented. ANFIS ...
    Pogon rotornog točka, habanje, rezni elementi, ANFIS

  • Life Cycle Assessment of Individual Wood Biomass Heating Systems in Households

    Boban Pavlović, Dejan Ivezić, Marija Živković (2020)
    The use of solid fuels (wood biomass and coal) for heating of households continues to be common practice within European countries. Solid fuel combustion in households contributes more than 46% to total emissions of fine particulate matter. In this study, a life-cycle assessment (LCA) of firewood-based and pellet-based heating systems is performed. These two systems represent two different types of individual wood biomass heating systems. In the case of the firewood-based heating systems, it is analyzed a typical stove ...
    Grejanje, Analiza životnog ciklusa, Drvna biomasa, Individualni sistemi grejanja
    ... (LCA) of firewood-based and pellet-based heating systems is performed. These two systems represent two different types of individual wood biomass heating systems. In the case of the firewood-based heating systems, it is analyzed a typical stove in Serbian households, and in the case of pellet-based ...
    ... comparative review of heating systems in EU countries, based on efficiency and fuel cost, Renewable and Sustainable Energy Reviews, pp. 687-699. [3] WHO, World Health Organization. (2015). Residential heating with wood and coal: health impacts and policy options in Europe and North America, WHO Regional ...
    ... residential heating systems: a comparison of distributed and centralized systems, Energy Procedia, Vol. 104, pp. 287-292. [10] Shah, V.P., Col Debella, D., Ries, R.J. (2008). Life cycle assessment of residential heating and cooling systems in four regions in the United States, Energy and Buildings, Vol ...

  • Effect of Properties of Working Fluids on the Efficiency of a Low-Temperature Organic Rankine Cycle

    Marija Živković, Aleksandar Mijatović, Dejan Ivezić, Boban Pavlović (2024)
    Decarbonization of all segments of energy systems, both on the supply and demand side, is one of the main goals of the energy transition. Electricity supply in the future will largely rely on generation from intermittent energy sources: wind and solar. Locally available, non-utilized alternative low-temperature energy sources as hydro-geothermal wells, and abounded oil and gas wells, have the potential to provide continual energy production over the year. Electricity generation from these energy sources is carried out with working ...
    svojstva, radni fluidi, efikasnost, ORC, niska temperatura

  • Building Terminological Resources in an e-Learning Environment

    Ranka Stanković, Ivan Obradović, Olivera Kitanović, Ljiljana Kolonja (2012)
    ... related to mining engineering, but indispensable for information systems in this area (e.g. measurement units), as well as meta-classifications (file formats, data types, and the like). Controlled dictionaries derived from RudOnto also serve for validation, classification and specification of ...
    ... various texts on the web. First and foremost, they are indispensable in information an document retrieval systems. In addition to monolingual resources, machine translation systems and cross- language information retrieval emphasize the need for development of bilingual and multilingual terminological ...
    ... of efficient and flexible database search and information extraction on the web is growing each day, performance of the search related to mining engineering data can be greatly improved by the use of RudOnto in query expansion [10]. Given the variety of applications of RudOnto and in view of ...

  • Constitutive Model for Analysis of Long-Term Municipal Solid Waste Landfill Settlement

    Irena Basarić Ikodinović, Dragoslav Rakić, Mirjana Vukićević, Sanja Jocković, Jovana Janković Pantić (2022)
    Large long-term settlement occurs at the municipal solid waste landfills over an extended period of time which may lead to breakage of the geomembrane, damage of the cover systems, other protective systems or facilities constructed on top of a landfill. Also, municipal solid waste is an extremely heterogeneous material and its properties vary over location and time within a landfill. These material characteristics require the formulation of a new constitutive model to predict the long-term settlement of municipal solid ...
    constitutive model, finite element analysis, municipal solid waste, settlement

  • How active is recent tectonics in the central Balkans: Evidence from the Serbian Carpatho-Balkanides

    Ana Mladenović (2022)
    Since the Late Cretaceous, after closure of the Neotethys ocean, tectonic processes in the central Balkan Peninsula were mainly controlled by the mutual interaction of the Adriatic and the Eurasian plates, and tectonic units in-between. Most of the tectonic structures that have been active during Cenozoic times were inherited from previous tectonic stages under different tectonic regimes. Tectonic activity within the Carpatho-Balkan orogen in eastern Serbia since Miocene is conditioned by the existence of the rigid Moesian promontory east ...

  • Control of substructure construction of railways in the Republic of Serbia

    Dragan Lukić, Dragoslav Rakić, Irena Basarić Ikodinović (2022)
    Контрола збијености природног тла (у ископу) или збијеног у насипу при изградњи саобраћајница представља један од основних облика контроле квалитета доњег строја. Код изградње брзих саобраћајница (аутопутеви и брза железница) приоритет је постизање високог нивоа контроле извршених радова. У циљу онемогућавања диференцијалног слегања (при изградњи насипа), или промене запремине услед допунског збијања материјала, које неминовно доводе до деформација, потребно је извршити оптимално збијање материјала. У оквиру овог рада приказује се техничка регулатива која регулише контролу збијености при изградњи железничке ...
    доњи строј, техничка регулатива, насип, збијеност, контрола
    ... No. 39/2016 and 74/2016). The paper presents the technical conditions for compaction testing according to the mentioned regulations as well as the state of control applied in practice (during construction). Also, the paper points out the shortcomings of such application of control and the proposal ...
    ... railways, and especially on the construction of a large number of industrial tracks for the economy needs. Almost as a rule, the control of embankment construction is performed only by determining the dynamic deformation modulus Evd, and without determining the degree of compaction Dpr and determining ...
    ... between Ev2 and Evd as well as the ratio Ev2/Ev1. Also, when testing with a light drop weight, the required moisture is not checked, and testing of layers is not performed in the same height profile, so the obtained results cannot be compared by layers. This practice of compaction control and substructure ...

  • INVENTS: A Hybrid Mine Ventilation Planning and Design System

    Lilić Nikola, Stanković Ranka, Obradović Ivan (2013)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    hybrid systems, mine ventilation, expert systems
    ... , Expert Systems, Design and Development, Macmillan Publishing Company, New York, 1994. [3] Hartman,H., (ed.), SME Mining Engineering Handbook, Society for Mining, Metallurgy, and Exploration, Inc. Littleton, Colorado, 2nd Ed. Vol.1., 1992. [4] Kowalik,J.S., (ed.), Coupling Symbolic and Numerical ...
    ... the hybrid system INVENTS, as well as system structure and user interface. Keywords: hybrid systems, mine ventilation, expert systems 1. Introduction The methodology of mine ventilation planing and design in contemporary mine theory and practice differs substantially from the traditional approach ...
    ... interface) technology available for MS Windows applications. It enables a straightforward and easy manipulation of input data and control over parts of the problem-solving process. It also offers suggestions and recommendations to the user for the improvement of the overall performance of the mine ...

  • Overwiew of In-Pit Crushing & Conveying Technology in Open Pit Mines

    Ali Nasirinezhad, Dejan Stevanović, Dragan Ignjatović, Petar Marković (2021)
    The conditions under which contemporary surface mining operations is carried out obviously becoming increasingly complex. In such complex conditions, the optimization of haulage systems as the technological phase with the largest share in the total operating costs, is very important from the aspect of achieving profitability of the mining project. In a large number of cases, the application of traditional haulage systems with trucks (as the most dominant type of haulage in open pit mines) does not lead to ...
    In Pit Crushing and Conveying, IPCC, open pit mining, haulage, optimization, costs saving

  • INVENTS: a hybrid system for subsurface ventilation analysis

    Nikola Lilić, Ranka Stanković, Ivan Obradović (2000)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    ... , Expert Systems, Design and Development, Macmillan Publishing Company, New York, 1994. [3] Hartman,H., (ed.), SME Mining Engineering Handbook, Society for Mining, Metallurgy, and Exploration, Inc. Littleton, Colorado, 2nd Ed. Vol.1., 1992. [4] Kowalik,J.S., (ed.), Coupling Symbolic and Numerical ...
    ... the hybrid system INVENTS, as well as system structure and user interface. Keywords: hybrid systems, mine ventilation, expert systems 1. Introduction The methodology of mine ventilation planing and design in contemporary mine theory and practice differs substantially from the traditional approach ...
    ... interface) technology available for MS Windows applications. It enables a straightforward and easy manipulation of input data and control over parts of the problem-solving process. It also offers suggestions and recommendations to the user for the improvement of the overall performance of the mine ...

  • Fuzzy Model for Risk Assessment of Machinery Failures

    Dejan V. Petrović, Miloš Tanasijević, Saša Stojadinović, Jelena Ivaz, Pavle Stojković (2020)
    The main goal of this research was the development of an algorithm for the implementation of negative risk parameters in a synthesis model for a risk level assessment for a specific machine used in the mining industry. Fuzzy sets and fuzzy logic theory, in combination with statistical methods, were applied to analyze the time picture state of the observed machine. Fuzzy logic is presented through fuzzy proposition and a fuzzy composition module. Using these tools, the symmetric position of the ...
    fazi teorija, rizik, otkaz rudarskih mašina
    ... proposed risk assessment model is useful for any engineering system. Keywords: fuzzy theory; risk; mining machinery failure 1. Introduction Sudden failures of different parts of engineering systems are everyday occurrences in the mining industry, and they often lead to negative consequences that can ...
    ... factors that may affect the operation of an engineering system. Only thorough knowledge of the way a system operates and its correlation with other systems (in both a technical and technological sense) can lead to a first-rate risk assessment of an individual component’s failure. Meticulous attention should ...
    ... proposed risk assessment model is useful for any engineering system. Keywords: fuzzy theory; risk; mining machinery failure 1. Introduction Sudden failures of different parts of engineering systems are everyday occurrences in the mining industry, and they often lead to negative consequences that can ...

  • Hydraulic lift systems with piston type pump

    Veselin Batalović, Dušan Danilović, Vesna Karović-Maričić (2011)

  • Ventex: an expert system for mine ventilation systems analysis

    Nikola Lilić, Ranka Stanković, Ivan Obradović (1997)
    roblems relating to mine ventilation systems analysis are usually of a very complex nature. They involve the estimation of numerous interdependent parameters pertaining to the network status, ventilation status, ventilation system stability, air current losses, climate conditions, gas state, fire risk and dangerous dust pollution risk. The solution to these problems relies, to a great extent, on numerical methods. With the development of computer technology these methods were incorporated as numerical routes in software packages, such as the mine ...
    expert system, mine ventilation

  • The influence of alkyl polyglucosides (and highly ethoxylated alcohol boosters) on the phase behavior of a water/toluene/technical alkyl polyethoxylate microemulsion system

    Marija Ilic, Franz-Hubert Haegel, Vesna Pavelkic, Dragan Zlatanovic, Snezana Nikolic-Mandic, Aleksandar Lolic, Zoran Nedic (2016)
    The influence of additives (alkyl polyglucoside, Glucopon 600 CS UP and alcohol ethoxylate C18E100) on the behavior of the water/toluene/Lutensol ON 50 (technical oxoalcohol, i-C10E5) microemulsion system as a function of temperature and composition has been investigated. The phase behavior of the microemulsions was determined by vertical sections through the Gibbs phase prism (fish-like phase diagrams). Alkyl polyglucoside shifts the one phase region to lower temperatures compared with water/toluene/Lutensol ON 50 mixtures. This is contrary to the expectation, considering ...
    микроемулзија, толуен, алкил полиглукозид, оксоалкохол етоксилат, појачивач ефикасности, „fish“ дијаграми
    ... RESULTS AND DISCUSSION The pseudo-binary phase diagrams of micro- emulsion systems were determined at equal mass fractions of water and toluene (a= 0.5) for two non- ionic surfactants, pure linear CxjEs and technical branched i-Cxo5Es (Lutensol ON 50) in order to find the composition and temperature ...
    ... calculated with Eqs. (2) or (3) and the mass fraction of the additive in the surfactant /additive mixture with Eq. (4). Samples were weighed into test tubes, which were immediately sealed (glass stoppers) and put into a thermostated water bath with temperature control up to 0.2 *C. In the thermostated ...
    ... Glukopon 600 CS UP, i alkohol-etoksilata 1Fat·:ulty of Mining and Geology, Serbia IBG-3 Agrosph8are, Julich, Germany and Metallurgy, University of Belgrade, Belgrade, Serbia “Innovation Center Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia ŠFaculty of Chemistry ...

  • Development of the Availability Concept by Using Fuzzy Theory with AHP Correction, a Case Study: Bulldozers in the Open-Pit Lignite Mine

    Stevan Đenadić, Dragan Ignjatović, Miloš Tanasijević, Uglješa Bugarić, Ivan Janković, Tomislav Šubaranović (2019)
    Availability is one of the most used terms in maintainability engineering. This concept is used to denote: The quality of service of an engineering system, i.e., machines, weak points’ analysis, asset management, as well as making decisions in the process of life cycle management. Availability is an overall indicator and contains partial indicators that are oriented towards reliability, maintenance, and logistical support. Availability presents a variable value and changes in time and space. Usually, availability is shown as the ...
    raspoloživost, fazi teorija, AHP višekriterijumska analiza, eksperska ocena, buldozer
    ... Milovanovic, Z.N. Systems Maintainability and Reliability; The Research Center of Dependability and Quality Management DQM: Prijevor, Serbia, 2007. 2. Dhillon, B.S. Mining Equipment Reliability, Maintainability and Safety; Springer: London, UK, 2008. 3. Todorovic, J. Maintainability Engineering; JUMV: Belgrade ...
    ... . 2. Materials and Methods 2.1. The Availability Concept in the Technical Systems of Maintenance Engineering Availability is calculated on the basis of the time state picture, in which times of operation alternate with times of failure. The time state picture, i.e., the time and maintenance time ...
    ... determine the availability function in the form of Equations (4) and (5). To determine availability in this way, an appropriate IT structure for keeping track of time ti is required. In real terms related to complex machine engineering systems, this condition is usually not fulfilled or only partially ...

  • Available technological procedures for capturing CO2 in the industrial and power generation sectors

    Lola Tomić, Vesna Karović Maričić, Dušan Danilović, Branko Leković, Miroslav Crnogorac (2021)
    Climate change is a major environmental issue caused by anthropogenic emissions of greenhouse gases. Capturing CO2 and storing it in suitable geological formations is one of the main technological solutions that can provide mitigation of CO2 emission into the atmosphere. Capturing CO2 represents the first phase in process of carbon capture and storage, and includes the application of various technologies for the separation of CO2 produced in the energy and industrial sectors. There are four main systems for capturing ...
    capturing CO2, power plants, CO2 capture systems, CO2 technologies
    ... efficiency and small capital and operational investments which reduce costs [23,29]. This process is fully automated, easy to control and operate [29]. Membrane technology has great potential for capturing CO2 from different gas streams such as: CO2/H2 separation in pre-combustion systems, CO2/N2 ...
    ... Journal of Research in Engineering and Technology 2013, 2 (5), 847-853. 15. CCS Browser. A guide to CO2 Capture and Storage. Available online: https://www.ccsbrowser.com/# (accessed on 05 August 2021). 16. NETL. Available online: https://netl.doe.gov/research/coal/energy- systems/gasification/gasi ...
    ... high energy consumption, and high capital and operating costs. Membrane-based separation has several advantages over other technologies due to its high CO2 capture efficiency and small capital and operational investments, and this process is fully automated, easy to control and operate. ...

  • Razvoj ARCGIS geobaze površinskog kopa korišćenjem UML CASE alata

    Aleksandra Tomašević, Ljiljana Kolonja, Ivan Obradović, Ranka Stanković, Olivera Kitanović (2012)
    ... pit INTRODUCTION The growing complexity of engineering tasks creates a need for tools that offer possibilities for high quality situation monitoring and comprehension, as well as prediction of our future line of action. Geographic information systems (GIS) are precisely such a tool. They offer support ...
    ... water and soil quality, determination of the level of risk to human health, flora and fauna, as well as planning of protection measures. An important advantage offered by geographic information systems is the establishment of relations between descriptive, alphanumeric, non-spatial data and spatial ...
    ... , Thomsen A., Cremers A. B., Koos B., [2002]: Management and visualization of large, complex and time-dependent 3D objects in distributed GIS, Proceedings of the 10th ACM international symposium on Advances in geographic information systems GIS '02, 2002. ISBN:1- 58113-591-2 8 [11] Stanković ...

  • Extensive vibrations of the belt conveyer drive electromotor of a bucket wheel excavator as a result of intesified wear-and-tear of its mount support

    Vesna Damnjanović, Predrag Jovančić, Snežana Aleksandrović (2017)

  • A Fuzzy Expert Model for Availability Evaluation

    Dejan Ivezić, Miloš Tanasijević, Predrag Jovančić, Radiša Đurić (2019)
    Each technical system within itself carries the great potential danger of possible occurrence of failure and damages. Mining machines are characteristic by great investment values, costs of unplanned shutdowns, complex working conditions, and environment and workers hazards. Systematic monitoring of the mining machinery is of great importance for the management of the mining companies. Availability is the overall concept of quality of service. Includes information regard to operating state, an idle state, a standby state and shut down. The ...
    raspoloživost, ekspertski sistem, fazi teorija, buldozeri
    ... are produced in large batches and it is very important to be selected in accordance with the working environment. Availability is an integral and important component of life cycle management for numerous engineering systems. This is quite a familiar term in engineering communication. This article described ...
    ... supportability and the other constituent parts of availability are crucial and must be established and optimized for the economic success of selected machine or overall business systems [5]. The most usual consideration of the availability of machines or any other engineering system in a complex ...
    ... be implemented to other engineering systems or products. REFERENCES [1] Tanasijević M., Ivezić D., Jovančić P., Ćatić D., Zlatanović D., Study of Dependability Evaluation for Multi-hierarchical Systems Based on Max–Min Composition, Quality and Reliability Engineering International, 29(3), 317-326 ...