Претрага
618 items
-
Analysis of the exhaust emissions inventory from auxiliary mining machines
Stevan Đenadić, Aleksandar Mirković, Jovana Mitrović, Filip Miletić, Predrag Jovančić, Dragan Ignjatović (2023)Open-pit coal mines are equipped with a large number of mining machines and vehicles with diesel engines. Due to common daily operation of these machines and vehicles large amounts of exhaust gases which contain numerous pollutants are emitted into the atmosphere. The demand to reduce air pollution induced the activities in developed countries to map and calculate all gases emitted by industries to formulate and select adequate preventive activities. In collaboration with machine manufacturers, emission standards for off-road machines ...Stevan Đenadić, Aleksandar Mirković, Jovana Mitrović, Filip Miletić, Predrag Jovančić, Dragan Ignjatović. "Analysis of the exhaust emissions inventory from auxiliary mining machines" in 9th International Conference Mining and Environmental Protection, University of Belgrade, Faculty of Mining and Geology (2023) М33
-
Use of the 3D laser scanning while controlling the geometry of elements of bucket wheel escavator
Milošević Dragan, Pantić Marko, Stojaković Miša, Ganić Aleksandar, Milutinović Aleksandar. "Use of the 3D laser scanning while controlling the geometry of elements of bucket wheel escavator" in Energetsko rudarstvo, nove tehnologije, održivi razvoj : zbornik radova = Energy Mining, New Technologies, Sustainable Development : proceedings / III međunarodni simpozijum Energetsko rudarstvo 2010, 08-11. Septembar, 2010, Banja Junaković, Apatin = 1, Beograd:Rudarsko-geološki fakultet, Beograd (2010): 304-311 M63
-
Opening and development of the subhorizont at a level of 20m in mine Veliki Majdan - Ljubovija, Republic of Serbia
Mitić Saša, Milojević Dragan, Makar Nenad, Tokalić Rade. "Opening and development of the subhorizont at a level of 20m in mine Veliki Majdan - Ljubovija, Republic of Serbia" in Zbornik na trudovi PODEKS ’11 - V stručno sovetuvanje na tema: Tehnologija na podzemna eksploatacija na mineralni surovini – Makedonska Kamenica, 11-12.11.2011. 1, Makedonska Kamenica:Sojuz na rudarskite i geološkite inženeri na Makedonija (2011): 60-65 M33
-
Dispersion Modeling of Particulate Matter in Surface Lead and Zinc Mine Šuplja Stijena
Nikola Lilić, Vladimir Milisavljević, Uroš Pantelić, Ljiljana Kolonja, Dragan Medenica. "Dispersion Modeling of Particulate Matter in Surface Lead and Zinc Mine Šuplja Stijena" in Mining and Environmental Protection, 5th International Symposium, Beograd:Rudarsko-geološki fakultet, Center for Environmental Engineering (2015): 366-375 M33
-
Variscan granitoids of the East Serbian Carpatho-Balkanides: A geodynamic snapshot from new U/Pb zircon dating
Kristina Šarić, Irena Peytcheva, Bojan Kostić, Dejan Prelević, Suzana Erić, Vladica Cvetković, Dragan Jovanović (2017)Kristina Šarić, Irena Peytcheva, Bojan Kostić, Dejan Prelević, Suzana Erić, Vladica Cvetković, Dragan Jovanović. "Variscan granitoids of the East Serbian Carpatho-Balkanides: A geodynamic snapshot from new U/Pb zircon dating" in Workshop SPACIM 2017, November 17, Davos, Switzerland, Davos : (2017) M34
-
Application of novel Zn-ferrite modified glassy carbon paste electrode as a sensor for determination of Cd(II) in waste water
Stanković Dalibor M, Skrivanj Sandra, Savić Nenad, Nikolić Aleksandar, Vulić Predrag, Manojlović Dragan (2014)Stanković Dalibor M, Skrivanj Sandra, Savić Nenad, Nikolić Aleksandar, Vulić Predrag, Manojlović Dragan. "Application of novel Zn-ferrite modified glassy carbon paste electrode as a sensor for determination of Cd(II) in waste water" in Electroanalysis 26 no. 7, Hoboken, NJ:John Wiley & Sons (2014): 1536-1543. https://doi.org/10.1002/elan.201400095 M22
-
Fe doped TiO2 prepared by microwave-assisted hydrothermal process for removal of As(III) and As(V) from water
Anđelković Ivan B, Stanković Dalibor M, Nešić Jelena, Krstić Jugoslav B, Vulić Predrag, Manojlović Dragan D, Roglić Goran M (2014)Anđelković Ivan B, Stanković Dalibor M, Nešić Jelena, Krstić Jugoslav B, Vulić Predrag, Manojlović Dragan D, Roglić Goran M. "Fe doped TiO2 prepared by microwave-assisted hydrothermal process for removal of As(III) and As(V) from water" in Industrial and Engineering Chemistry Research 53 no. 27, Washington:American Chemical Society (2014): 10841-10848. https://doi.org/10.1021/ie500849r M21
-
Magnetization enhancement in nanostructured random type MgFe 2O4 spinel prepared by soft mechanochemical route
Antić Bratislav, Jović Nataša, Pavlović Miodrag B., Kremenović Aleksandar, Manojlović Dragan, Vučinić-Vasić Milica, Nikolić Aleksandar S. (2010)Antić Bratislav, Jović Nataša, Pavlović Miodrag B., Kremenović Aleksandar, Manojlović Dragan, Vučinić-Vasić Milica, Nikolić Aleksandar S.. "Magnetization enhancement in nanostructured random type MgFe 2O4 spinel prepared by soft mechanochemical route" in Journal of Applied Physics 4 no. 107, 1155 16TH ST, NW, WASHINGTON, DC 20036 USA:American Institute Physics (2010). https://doi.org/10.1063/1.3319563 M21
-
NMR kinetic studies of the interactions between [Ru(terpy)(bipy)(H2O)]2+ and some sulfur-donor ligands
Mijatović Aleksandar, Šmit Biljana, Rilak Ana, Petrović Biljana , Čanović Dragan, Bugarčić D. Živadin (2013)Mijatović Aleksandar, Šmit Biljana, Rilak Ana, Petrović Biljana , Čanović Dragan, Bugarčić D. Živadin. "NMR kinetic studies of the interactions between [Ru(terpy)(bipy)(H2O)]2+ and some sulfur-donor ligands" in Inorganica Chimica Acta 394, Amsterdam, Netherlands : Elsevier BV (2013): 552-557. https://doi.org/10.1016/j.ica.2012.09.016 M22
-
Some models for determination of parameters of the soil oscillation law during blasting operations
Suzana Lutovac, Dragan Medenica, Branko Gluščević, Rade Tokalić, Čedomir Beljić. "Some models for determination of parameters of the soil oscillation law during blasting operations" in Energies, Basel, Switzerland : MDPI (2018). https://doi.org/10.3390/en9080617 M21
-
Adaptive neuro-fuzzy prediction of operation of the bucket wheel drive based on wear of cutting elements
The capacity of the rotor excavator depends largely on the operation of the subsystem for digging. There is a great contribution to the correct and sharp teeth when the capacity is the highest. In the function of time, the teeth become clogged due to abrasive wear, or changes in their geometric shape. To analyze the bucket wheel drive in depend on wear of the cutting elements in this study adaptive neuro fuzzy inference system (ANFIS) approach was implemented. ANFIS ...Filip Miletić, Predrag D. Jovančić, Milos Milovančević, Dragan Ignjatović. "Adaptive neuro-fuzzy prediction of operation of the bucket wheel drive based on wear of cutting elements" in Advances in Engineering Software, Elsevier BV (2020). https://doi.org/10.1016/j.advengsoft.2020.102824 М21а
-
Effectiveness Analysis of Different Bucket-wheel Excavators
Coal production in open-pit lignite mines in the Republic of Serbia is performed with continuous work systems. In addition to coal production, the same systems are used for the exploitation of large quantities of overburden. According to the reliability concept, continuous systems are in linear connection. If the failure occurs in one part of the system, that will produce a downtime of the entire system. The initial and most important factor of continuous systems is the bucket-wheel excavator. It ...Stevan Đenadić, Predrag Jovančić, Dragan Ignjatović, Miloš Tanasijević, Filip Miletić. "Effectiveness Analysis of Different Bucket-wheel Excavators" in 8th International Conference Mining and Environmental Protection, Sokobanja, 22-25 September 2021, University of Belgrade, Faculty of Mining and Geology, Belgrade, Serbia (2021) М33
-
Application of the Fuzzy Model in the Evaluation and Selection of Hydraulic Excavators on Open-Pit Lignite Mine
Stevan Đenadić, Miloš Tanasijević, Vladimir Milisavljević, Dragan Ignjatović, Predrag Jovančić (2021)The production of lignite in large open-pit mines is mainly performed with continuously operating equipment, where bucket-wheel excavators, bucket-chain excavators, belt conveyors, and spreaders are the basic machines. Smaller machines, usually of discontinuous operating nature, are commonly categorized as auxiliary machines. This paper presents the research related to the analysis of auxiliary machine parameters with the case study for a hydraulic excavator. The purpose of the analysis was to develop a model of rating quality of service of the ...Stevan Đenadić, Miloš Tanasijević, Vladimir Milisavljević, Dragan Ignjatović, Predrag Jovančić. "Application of the Fuzzy Model in the Evaluation and Selection of Hydraulic Excavators on Open-Pit Lignite Mine" in SSRN Electronic Journal, Elsevier BV (2021). https://doi.org/10.2139/ssrn.3945617 М33
-
Машине и помоћни радови на површинским коповима
Драган Игњатовић, Томислав Шубарановић, Стеван Ђенадић. Машине и помоћни радови на површинским коповима, Београд : Универзитет у Београду, Рударско-геолошки факултет, 2021 Без категорије
-
Development of the Cost-Based Model for Monitoring the Lifetime of the Earth Moving Machines
This paper presents the model for the identification of reference points on the lifetime curve of engineering systems. This curve commonly represents the increase and decline of failure in relation to time. A direct correlation between failure rate and costs is assumed in this paper, therefore, statistical and empirical analysis of costs provided reference points. This approach is used for positioning stages of the engineering system’s lifetime with a minimal number of failures and costs, regardless of whether these ...Electrical and Electronic Engineering,Industrial and Manufacturing Engineering, Control and Optimization, Mechanical Engineering, Computer Science (miscellaneous), Control and Systems EngineeringUgljesa Bugarić, Milos Tanasijević, Stevan Djenadić, Dragan Ignjatović, Ivan Janković. "Development of the Cost-Based Model for Monitoring the Lifetime of the Earth Moving Machines" in Machines, MDPI AG (2022). https://doi.org/10.3390/machines10110995 М22
-
Održivi razvoj rudarskog sektora
Imajući u vidu sve veću zabrinutost za stanje životne sredine i socioekonomsku nejednakost, sektorska održivost bez obzira na privrednu delatnost, privlači sve veću pažnju kako globalno tako i lokalno. U tom smislu postoji konsenzus kod svih zainteresovanih strana da čovečanstvo treba da usvoji mere za promenu trenutno neodrživih obrazaca proizvodnje i potrošnje. Rudarska industrija igra fundamentalnu ulogu u ovom kontekstu, privlačeći pažnju kroz različite inicijative tokom poslednjih decenija. Neke od njih su čak i primenjene u praksi ali konsenzus ...Vladimir Pavlović, Dragan Ignjatović, Tomislav Šubaranović. "Održivi razvoj rudarskog sektora" in 15. Međunarodna konferencija o površinskoj eksploataciji OMC 2022, Zlatibor, 12.-15.10.2022., Jugoslovenski komitet za površinsku eksploataciju (2022) М33
-
Geotechnical conditions of “Debelo brdo” tunnel construction on the highway E-80: Nis-Merdare-Pristina (“Peace Highway”)
The construction of the highway E-80 has begun in Serbia, which will represent the traffic hub of the Western Balkans and will be part of the main regional transport network of Southeast Europe. Its total length through Serbia is 77 km, and one part of the route is designed through a typical plain terrain, while a larger part of the route passes through hilly terrain. The construction of the tunnel “Debelo brdo” is planned partly in an open cut ...Dragoslav Rakić, Irena Basarić Ikodinović, Radojica Lapčević, Dragan Lukić. "Geotechnical conditions of “Debelo brdo” tunnel construction on the highway E-80: Nis-Merdare-Pristina (“Peace Highway”)" in Proceedings of the XVIII ECSMGE 2024 geotechnical engineering challenges to meet current and emerging needs of society, Lisbon, 26-30 August 2024, CRC Press (2024). https://doi.org/10.1201/9781003431749-356 М33
-
Approximation of the number of roots that do not lie on the unit circle of a self-reciprocal polynomial
Dragan Stankov (2024)We introduce the ratio of the number of roots not equal to 1 in modulus of a reciprocal polynomial Rd(x) to its degree d. For some sequences of reciprocal polynomials we show that the ratio has a limit L when d tends to infinity. Each of these sequences is defined using a two variable polynomial P(x,y) so that Rd(x) = P(x,xn). For P(x,y) we present the theorem for the limit ratio which is analogous to the Boyd-Lawton limit formula ...Dragan Stankov. "Approximation of the number of roots that do not lie on the unit circle of a self-reciprocal polynomial" in The book of abstracts XIV symposium "mathematics and applications” Belgrade, Serbia, December, 6–7, 2024 , Univerzitet u Beogradu, Matematički fakultet (2024) М64
-
Fenton-like oxidation of an azo dye using mesoporous Fe/TiO2 catalysts prepared by a microwave-assisted hydrothermal process
Nešic Jelena, Manojlović Dragan D, Jović Milica S, Dojčinović Biljana P, Vulić Predrag, Krstić Jugoslav B, Roglić Goran M (2014)Nešic Jelena, Manojlović Dragan D, Jović Milica S, Dojčinović Biljana P, Vulić Predrag, Krstić Jugoslav B, Roglić Goran M. "Fenton-like oxidation of an azo dye using mesoporous Fe/TiO2 catalysts prepared by a microwave-assisted hydrothermal process" in Journal of the Serbian Chemical Society 79 no. 8, Belgrade:Serbian Chemical Society (2014): 977-991. https://doi.org/10.2298/JSC131001143N M23
-
Curcumin nanonization using an alternative small-scale production unit: selection of proper stabilizer applying basic physicochemical consideration and biological activity assessment of nanocrystals
Ines Nikolić, Jelena Antić-Stanković, Dragana Božić, Danijela Ranđelović, Bojan Marković, Dominique Jasmin Lunter, Aleksandar Kremenović, Miroslav Savić, Snežana Savić (2020)As the number of poorly soluble drugs is increasing, nanocrystals have become very interesting due to wide range of application possibilities. Curcumin was used as a model active ingredient in this work. Even though it has many proven positive effects, due to its physicochemical issues, its possibilities have not been fully exploited. The goal of this work was to select optimal conditions for a top-down method for curcumin nanosuspension production, and to perform their comprehensive characterization applying complementary methodologies: ...Ines Nikolić, Jelena Antić-Stanković, Dragana Božić, Danijela Ranđelović, Bojan Marković, Dominique Jasmin Lunter, Aleksandar Kremenović, Miroslav Savić, Snežana Savić. "Curcumin nanonization using an alternative small-scale production unit: selection of proper stabilizer applying basic physicochemical consideration and biological activity assessment of nanocrystals" in Review on advanced materials science, Walter de Gruyter GmbH (2020). https://doi.org/10.1515/rams-2020-0043 М22