Претрага

Упит dcterms_subject_txt:Groundwater modeling

295 items

  • Numerical modeling of Selanac debris flow propagation using SPH code

    Jelka Krušić, Biljana Abolmasov, Miloš Marjanović, Manuel Pastor, Saeid M. Tayyebi (2021)
    The Selanac debris flow is a very huge event triggered after extreme rainfall caused by Cyclone Tamara activity in the Republic of Serbia in May 2014. The Selanac case study was already modelling in different programs using Voellmy rheology assumptions like RAMMS software. In this paper research are focusing particularly on the process of debris flowing from initiation zone to main deposition area using Geoflow SPH two-phase model considering frictional rheology law. Main rheological parameters are back-calculated using also ...
    debris flow, modelling, SPH code, DEM
    ... 2023-10-14 04:20:51 Numerical modeling of Selanac debris flow propagation using SPH code Jelka Krušić, Biljana Abolmasov, Miloš Marjanović, Manuel Pastor, Saeid M. Tayyebi Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] Numerical modeling of Selanac debris flow ...
    ... https://www.issmge.org/publications/online-library SCG-XIII INTERNATIONAL SYMPOSIUM ON LANDSLIDES. CARTAGENA, COLOMBIA- JUNE 15th-19th-2020 Numerical modeling of Selanac debris flow propagation using SPH code Jelka Krušić, Biljana Abolmasov & Miloš Marjanović University of Belgrade, Faculty of ...
    ... Different mechanisms, rheological and numerical models are used in this area of research. Generally, there are mainly two groups of models used for modeling on flow type landslides: empirical-statistical (Rickenmann, 1999, Legros, 2002), or physical (deterministic)- dynamical or numerical (Savage and ...

  • Strategic Environmental Assessment in the Application of Preventive Protection for Wind Farm Noise—Case Study: Maestrale Ring Wind Farm

    Boško D. Josimović, Aleksandar Cvjetić, Božidar Manić (2021)
    Determining the spatial position of wind turbines is the initial and most important phase in the development of a wind farm project. In this sensitive phase, all potential problems that may arise in the later stages of project development should be prevented by means of spatial and urban planning instruments. This makes it possible to achieve maximum use of the potential of wind in a particular space and, thus, fulfil the technical and economic requirements of the project while ...
    Energija,energetski inženjering i elektroenergetska tehnologija,obnovljivi izvori energije, održivost i životna sredina,električni i elektronski inženjering,kontrola i optimizacija,inženjering
    ... assessment based on modeling the spatial dis- persion of the noise. Noise modeling was based on the following: 1. The permitted noise level values were, in the phase of the wind farm’s operation, in line with IFC PS1 recommendations, i.e., EHS Guidelines [57]; 2. Modeling was performed for 113 ...
    ... possible and desirable to apply different qualitative expert methods in combination with quantitative methods and modeling, which are also applied for partial impact assessments (such as modeling noise and the effects of shadow flicker). In this way, it is possible to achieve objectivity in the SEA pro- ...
    ... settlement. Energies 2021, 14, 6174 8 of 15 Figure 2. Results of modeling the spatial dispersion of noise for the day—evening period (coordi- nates are given in the Gauss-Kruger system). Figure 3. Results of modeling the spatial dispersion of noise for the night period (coordinates are ...

  • 3D modeling and monitoring of karst system as a base for its evaluation and utilization: a case study from eastern Serbia

    Saša Milanović, Zoran Stevanović, Ljiljana Vasić, Vesna Ristić-Vakanjac (2013)
    Earth-Surface Processes, Geology, Pollution, Soil Science, Water Science and Technology, Environmental Chemistry, Global and Planetary Change

  • Project REASONING: Characterization and technological procedures for recycling and reusing of the rudnik mine flotation tailings

    Vesna Cvetkov, Vladimir Simić, Stefan Petrović, Filip Arnaut, Milena Kostović, Dragan Radulović, Jovica Stojanović, Vladimir Jovanović, Dejan Todorović, Nina Nikolić, Jelena Senćanski, Grozdanka Bogdanović, Dragana Marilović (2024)

  • Mitigating hydrate formation in onshore gas wells: A case study on optimization techniques and prevention

    Milica Ješić, Bojan Martinović, Stefan Stančić, Miroslav Crnogorac, Dušan Danilović (2023)
    Gas wells, particularly those situated onshore, play a vital role in the global energy sector by supplying a significant portion of natural gas. However, operational challenges, notably gas hydrate formation, pose substantial issues, leading to complications such as flowline blockages and unexpected well shutdowns. Gas hydrates, crystalline structures resembling ice, ...
    Gas Well, Gas Hydrate Formation, Well Modeling, Well Performance Optimization, Choke Position Adjustments, Methanol Injection

  • Preliminary impact assessment of No2 emission from a heating plant on air pollution: case of Zemun, Serbia

    Boban Pavlović, Uroš Pantelić, Marija Živković, Dejan Ivezić (2023)
    The aim of this paper is to provide a preliminary evaluation of the impact caused by NO2 emissions from a heating plant on the local air quality. To model the spatial distribution of NO2 emissions from the heating plant, the AERMOD model was employed. The evaluation was conducted by analyzing and contrasting the simulated NO2 concentration from the heating plant with the overall NO2 concentration recorded at the nearest monitoring station over the entire heating season. The study focused ...
    AERMOD, квалитет ваздуха, моделирање дисперзије загађења, топлана, NO2 загађење

  • Back-arc underplating provided crustal accretion affecting topography and sedimentation in the Adria microplate

    Paolo Mancinelli, Vittorio Scisciani, Cristina Pauselli, Gérard M. Stampfli, Fabio Speranza, Ivana Vasiljević (2021)
    Supported by evidence of deep crustal sources for the observed magnetic anomalies in Central Italy and by outcropping gabbros in the Croatian archipelago, we model the observed gravity and magnetic anomalies in the Central Adriatic Sea and surroundings. We suggest that the major magnetic anomalies in the area are related to a wide underplating and propose that this volume represents the first stage of the back-arc Adria continental breakup in Early Permian times. During the Palaeotethys-Adria collision, underplating has ...
    Underplating, akrecija kore, Magnetske anomalije, Jadranska ploča

  • Transition pathways of household heating in Serbia: Analysis based on an agent-based model

    Boban Pavlović, Dejan Ivezić, Marija Živković (2022)
    To explore pathways of the energy transition of household heating, an agent-based simulation model was developed for the case of the Serbian household sector. The model is focused on individual entities (households) with the objective to explore the effects of policy instruments on energy transition in households with individual heating systems. Empirically collected survey data were used as input for households’ attitudes towards sustainable heating. Simulations showed that the proposed instruments would lead to higher heating efficiency and less ...
    energetska tranzicija, modeliranje bazirano na agentima, sistemi grejanja, sektor domaćinstva, obnovljivi izvori energije, emisija CO2

  • Modeliranje i simulacija energetske tranzicije u sektoru domaćinstava

    Boban S. Pavlović (2022)
    Aktuelnu energetsku tranziciju odlikuje ubrzanje procesa dekarbonizacije energetskih sistema, unapređenje energetske efikasnosti, razvoj čistijih tehnologija baziranih na obnovljivim izvorima energije i održivije korišćenje prirodnih resursa. Da bi se napravio ovako krupan zaokret u postojećim energetskim sistemima, osim promene postojećih tehnologija, potrebno je u planiranje energetske tranzicije uključiti i političke, sociološke, ekonomske i ekološke aspekte, a pre svega obrasce ponašanja i donošenja odluka krajnjih potrošača. Predmet istraživanja u disertaciji je energetska tranzicija sektora domaćinstva, preciznije tranzicija u grejanju domaćinstava, imajući u ...
    energetika, energetska tranzicija, energetsko planiranje, energetsko modeliranje, obnovljivi izvori energije, domaćinstva, ponašanje potrošača

  • A hydrogeological model of the open-cast mine Tamnava - West Field (Kolubara Coal Basin, Serbia)

    Jelena Ratković, Dušan Polomčić, Dragoljub Bajić, Bojan Hajdin (2016)
    ... spatial interactions, are extremely important for hydrogeologic modeling of a given area. The main purpose of a hydrogeologic model is to derive conclusions about the spread of the aquifers in the study area, their interactions, and groundwater flow conditions. Based on geologic and hydrogeologic exploration ...
    ... 1 University of Belgrade, Faculty of Mining and Geology, Department of Hydrogeology, Groundwater Modeling Center emails: jelena.mocevic@rgf.bg.ac.rs, dusan.polomcic@rgf.bg.ac.rs, dragoljub.bajic@rgf.bg.ac.rs, bojan.hajdin@ rgf.bg.ac.rs mailto:dusan ...
    ... piezometric head at a certain initial time. 48 Ratković J., Polomčić D., Bajić D., Hajdin B. A hydrogeologic model is the first step in groundwater modeling and precedes a hydrodynamic model. If the hydrogeologic model is not properly defined, the hydrodynamic model will not be realistic. In h ...

  • Numerical modelling of the roughly simultaneous emplacement of two distinct ophiolite belts

    Nikola Stanković, Vesna Cvetkov, Vladica Cvetković (2024)

  • Geotechnical Conditions for Construction of Savski Trg Metro Station as a Part of the Belgrade Metro Line One

    Nemanja Stanic, Dragoslav Rakic, Josip Isek, Slavoljub Simic (2024)
    In order to solve serious traffic congestion in Belgrade, a number of studies regarding the Belgrade Metro construction have been carried out since 1973. However, only in 2019, the routes of the future metro lines 1 and 2 were de-fined as a part of the General Metro Construction Project. The lines are de-signed to intersect at the location of Sava Square, where an interchange met-ro station will be built. It represents a complex geotechnical structure consist-ing of three different ...
    metro station, geotechnical modelling, displacements

  • Concepts for Improving Machine Learning Based Landslide Assessment

    Miloš Marjanović, Mileva Samardžić Petrović, Biljana Abolmasov, Uroš Đurić (2019)
    Katastar klizišta, Podložnost, Hazard, Mašinsko učenje, Uzorkovanje, Validacija

  • Numerical modelling of a single intra-oceanic subduction for the origin of the Balkan ophiolites

    Nikola Stanković, Vesna Cvetkov, Vladica Cvetković (2024)

  • Approach to operational mine planning: Case study Tamnava West

    Dejan Stevanović, Mirjana Banković, Milica Pešić Georgiadis, Ranka Stanković (2014)
    ... packages. For that reason in presented case study operational mine planning is done with Minex software. Key words: operational planning, geological modeling, coal quality control, mining block and cut. 1. INTRODUCTION Modern mining is characterized by continuous worsening of production conditions ...
    ... coal and other stratified deposits, such as phosphate, zinc, bauxite, iron ore, and platinum. Minex covers almost every part of geological modeling and mine planning process. It provides a fast and powerful set of modules for surface or underground mines, long or short term planning. Developing ...
    ... operational planning and coal quality control in Minex for the Tamnava West open pit, was based on 6 steps: - Preparation of data - Geological modeling - Ultimate pit design - Design of pit benches - Discretization of benches on mining blocks and cuts - Reporting 2.1.1. Preparation ...

  • Trans-Lithospheric Diapirism as a Possible Mechanism for Ophiolite Emplacement?

    Nikola Stanković, Taras Gerya, Vladica Cvetković, Vesna Cvetkov (2024)

  • Condition, problems and prospects of water supply from groundwater in Serbia

    Vesna Ristić Vakanjac, Bojan Hajdin (2019)
    groundwater, water supply, Serbia

  • INVENTS: A Hybrid Mine Ventilation Planning and Design System

    Lilić Nikola, Stanković Ranka, Obradović Ivan (2013)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    hybrid systems, mine ventilation, expert systems
    ... ResNet software package The object-oriented approach in system structuring and modeling was used as the strategy for defining the model of processes and data in the development of INVENTS. In this paper UML (Unified Modeling Language), as a standard language for visualization, specification, constructing ...
    ... should be stressed: • determining air flow distribution throughout the ventilation network, • simulation of climate conditions in mine chambers, • modeling of fire incidence in ventilation networks as well as • gas distribution in ventilation network. CFD INVENTS Data acquisition Design Im plem ...
    ... constructing and documenting of data on software was adopted for the software development analysis phase. The task of visual modeling of the system is to define the objects and logic of the real system using the adopted graphic notation. In view of the fact that SimVent was developed in Visual Studio 6.0 ...

  • Influence of DEM resolution on numerical modelling of debris flows in RAMMS - Selanac case study

    Jelka Krušić, Biljana Abolmasov, Mileva Samardžić Petrović (2019)
    Debris flows induced by intensive rainfall represent very hazardous phenomena in many parts of the World. Methods for prediction of runout distance of flow like mass movements are different and depending on the input data, rheology, and available or appropriate numerical solution. However, sometimes it is not easy to obtain pre event and post event high-resolution data in the rural or mountainous area. Thus, the topology of terrain is the most important input parameter for the every real case ...
    tecišta, modeliranje, RAMMS, DEM
    ... Mcardell BW, Graf C, Kaitna R (2015) Modeling debris-flow runout patterns on two alpine fans with different dynamic simulation models. Natural Hazards and Earth System Sciences 15 (7):1483-1492. Sosio R, Crosta GB, Hungr O (2008) Complete dynamic modeling calibration for the Thurwieser rock ...
    ... terrain. Cold Regions Science and Technology, 63, 1–14. . Frank F, McArdell BW, Oggier N, Baer P, Christen M, Vieli A (2017) Debris flow modeling at Meretschibach and Bondasca catchment, Switzerland: sensitivity testing of field-data-based entrainment model. Natural Hazards and Earth System ...
    ... 13 (1): 57- 77. Voellmy A (1955) Über die Zerstörungskraft von Lawinen. Schweizerische Bauzeitung 73: 212–285 Wu W (2015) Recent advances in modeling landslides and debris flows. Springer Series in Geomechanics and Geoengineering, Published by Springer Verlag. ...

  • INVENTS: a hybrid system for subsurface ventilation analysis

    Nikola Lilić, Ranka Stanković, Ivan Obradović (2000)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    ... ResNet software package The object-oriented approach in system structuring and modeling was used as the strategy for defining the model of processes and data in the development of INVENTS. In this paper UML (Unified Modeling Language), as a standard language for visualization, specification, constructing ...
    ... should be stressed: • determining air flow distribution throughout the ventilation network, • simulation of climate conditions in mine chambers, • modeling of fire incidence in ventilation networks as well as • gas distribution in ventilation network. CFD INVENTS Data acquisition Design Im plem ...
    ... constructing and documenting of data on software was adopted for the software development analysis phase. The task of visual modeling of the system is to define the objects and logic of the real system using the adopted graphic notation. In view of the fact that SimVent was developed in Visual Studio 6.0 ...