Претрага

Упит dcterms_subject_txt:Vertical axis rotation

121 items

  • Fault type assessment based on vertical gravity gradient anomalies – advantages and limitations

    Ivana Vasiljević, Snežana Ignjatović, Branislav Sretković (2024)
    The type of dip-slip faults can be assessed based on the analysis of vertical gravity gradients. Theoretically, just a simple comparation of the gradient extreme values can give us an answer whether the fault is normal or reverse (thrust). Practical application of this method is far more complicated and the results depend on a number of parameters, such as a complexity of geological setting, the quality of gravity data, dip angle and displacement of the fault, density contrast, etc. ...
    dip-slip faults, vertical gravity gradients, field data analysis
    ... type assessment based on vertical gravity gradient anomalies – advantages and limitations Ivana Vasiljević, Snežana Ignjatović, Branislav Sretković Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] Fault type assessment based on vertical gravity gradient anomalies ...
    ... ja et al., 2018) prefer to utilize gravity horizontal and/or vertical gradients to assess the characteristics of the fault. Gravity gradients are usually calculated from the gravity anomalies (often referred as a second vertical derivate, the more precise term due to a way of calculation), ...
    ... appropriate method. 86 METHOD OF INVESTIGA TION Faults often generate strong gravity gradients. Vertical gravity gradients (VGG) are particularly sensitive to faults. In the case of sufficient vertical displacement along the dip-slip fault, that creates detectable latera! rock density contrast, ...

  • Paleomagnetic study of Jurassic-Early Cretaceus sediments in the Danibicum of Eastern Serbia

    Vesna Cvetkov, Emo Marton, Vesna Lesić, Dragana Tomić (2015)
    ... direction for the Danubicum is well defined and similar to those for the Vardar zone suggesting that these two areas could have participated in a CW rotation of around 40° together, in post Early Miocene times. In order to support this conclusion, we plan to extend the research to the area situated ...

  • Some models for determination of parameters of the soil oscillation law during blasting operations

    Suzana Lutovac, Dragan Medenica, Branko Gluščević, Rade Tokalić, Čedomir Beljić (2018)
    ... formula [8] to find the approximate value of the definite integral of the observed function. Surface S confined by continuous curve y = f (x), x-axis, and vertical lines x = a and x = b, if f (x) ě 0 for a ď x ď b (Figure 1), as the definite integral of the function f (x), obtains the following: S “ b ...
    ...                                                     ‐                       Figure 1. Surface S confined by continuous curve y = f (x), x-axis, and vertical lines x = a and x = b. When carrying out blasting operations, we register (measure) at suitable measuring points the values of oscillation ...
    ... Ri`1 ´ Ri “ hi pi “ 1, 2, . . . , N ´ 1q (21) Energies 2016, 9, 617 5 of 15 a b X Figure 1. Surface S confined by continuous curve y = f(x), x-axis, and vertical lines x = a and x = b. When carrying out blasting operations, we register (measure) at suitable measuring points the values of oscillation ...

  • Coal homogenization stockyard sizing “Tamnava – Zapad” case study

    Božo Kolonja, Dinko Knežević, Ranka Stanković, Dejan Stevanović, Detlef Trummer (2016)
    ... shows a standard deviation diagram for lignite from the "Tamnava – Zapad" pit [Knežević et al, 2014], where the x-axis shows the number of layers in a pile (package), while the y-axis shows the standard deviation for LHV, and the narrow gray lines show the different simulations. The bottom and top ...
    ... boom should be capable of moving horizontally and vertically. The strata method can be applied by changing the angle between the boom and the stack axis, that is, no boom telescoping is necessary. Since coal quality determines the number of layers, the stacker speed should be adjusted accordingly ...

  • Low-temperature phase transition and magnetic properties of K3YbSi2O7

    Predrag Dabić, Volker Kahlenberg, Biljana Krüger, Marko Rodić, Sabina Kovač, Jovan Blanuša, Zvonko Jagličić, Ljiljana Karanović, Václav Petříček, Aleksandar Kremenović (2021)
    alkalni silikati elemenata retkih zemalja, fazni prelazi, magnetne karakteristike, razdvajanje kristalnog polja, silikati lantanica
    ... orientation of the SiO4 tetrahedra and the coordination of the potassium atoms, a shortening of the c axis and consequently decreasing unit-cell volume. The influence of the transition on the a axis is less pronounced. All this suggests a displacive-type phase transi- tion, which could be adequately ...
    ... crystal (Fig. S4). The selected single crystal, which gave a reliable magnetic signal, was oriented such that the direction of the crystallographic c axis was perpendicular to the external magnetic field. The mass of the selected single crystal (96 mg) was calculated indirectly from the crystal volume ...
    ... crystal (Fig. S4). The selected single crystal, which gave a reliable magnetic signal, was oriented such that the direction of the crystallographic c axis was perpendicular to the external magnetic field. The mass of the selected single crystal (96 pg) was calculated indirectly from the crystal volume ...

  • Terminology Acquisition and Description Using Lexical Resources and Local Grammars

    Cvetana Krstev, Ranka Stanković, Ivan Obradović, Biljana Lazić (2015)
    Acquisition of new terminology from specific domains and its adequate description within terminological dictionaries is a complex task, especially for languages that are morphologically complex such as Serbian. In this paper we present an approach to solving this task semi-automatically on basis of lexical resources and local grammars developed for Serbian. Special attention is given to automatic inflectional class prediction for simple adjectives and nouns and the use of syntactic graphs for extraction of Multi-Word Unit (MWU) candidates for ...
    ... l research” and a term for technical characteristics of machines “Length of the caterpillar transporting device measured from the vertical excavator rotation axis to the front edge of the caterpillar”. 4.2 Extraction of MWUs from domain texts The extraction of MWUs from a text is preceded by ...

  • Models of Determining the Parameters of Rock Mass Oscillation Equation with Experimental and Mass Blastings

    Suzana Lutovac, Branko Gluščević, Rade Tokalić, Jelena Majstorović, Čedomir Beljić (2018)
    ... the coordinate system logR-0-logv, certain points (logRi, logvi) will be below logR axis. In this case, we will increase the values of the logv ordinates by a positive number, so that all points are above the abscissa axis logR [11]. Such a procedure offers possibility to determine of parameters K and ...
    ... doing, the area bounded by x-axis, line segments x1M1 and xN MN and broken line, consisting of (N − 1) trapezoid [12,13], has the value: ST = 1 2 [ N−1 ∑ i=1 (yi + 3 + yi+1 + 3)·(xi+1 − xi)]. (29) Let’s mark the area bounded by line (27), lines x = x1, x = xN and x-axis with S. Its value is: S = ∫ ...
    ... (23) Minerals 2018, 8, 70 7 of 18 We will increase ordinate values y = logv by one positive number c, so that all points Mi(xi, yi + c) are above axis x = logR, i.e., so that yi + c = logvi + c > 0. In this manner, the Equation (23) becomes equation: y + c = ax + b + c. (24) In practice, for c the ...

  • Tektonska evolucija severoistočnih Dinarida

    Nikola Ranđelović, Branislav Trivić, Nemanja Krstekanić, Bojan Kostić, Uroš Stojadinović (2022)
    ... deformation are represented by S1 foliation, folded into rare mm to dm-scale isoclinal and asymmetric folds with significant variability in fold-axis orientation. The second observed deformation phase is related to Middle Jurassic to Eocene convergent processes between Adriatic and European derived ...

  • Failure Estimation of the Majdanpek Open Pit East Face Based on Inverse Velocity Model

    Miloš Marjanović, Stefan Milanović, Nikola Simić, Lazar Kričak (2024)
    The Majdanpek open pit mine south district is currently active mining prospect of copper ore exploitation in eastern Serbia. Its depth is approaching the termination depth and occurrences of large-scale instabilities and global instability of the final pit slope is possible. These can generate catastrophic mass movement inside an area that encloses a regional road route and the Pek River bed which is channelled along the outer contour of the pit. The displacements that were noted in early 2023, in the ...
    displacement, survey, inverse velocity, open pit

  • Structural dissymmetrization of optically anisotropic Grs64±1Adr36±1Sps2 grandite from Meka Presedla (Kopaonik Mt., Serbia)

    Pavle Tančić, Aleksandar Kremenović, Predrag Vulić (2019)
    In this paper, grandite core with Grs64±1Adr36±1Sps2composition was crystallographically studied. This core represents zone A of the macroscopically visiblefive A–E zones of the optically anisotropic Grs58–64 Adr36–42Sps2 grandite. The applied procedure includes the detailed analysis of the powder diffraction patterns, and the Rietveld refinements of the crystal structures in a series of 18 space groups and two mixtures, which were followed by the comparative analysis of the R-values, site occupancy factors, and the bond lengths and angles. Synthesis of all ...
    grandite, XRPD, crystal structure, structural dissymmetrization

  • Development of integrated fuzzy model for mine management optimization

    Miodrag Čelebić, Sanja Bajić, Dragoljub Bajić, Dejan Stevanović, Duško Torbica, Vladimir Malbašić (2023)
    fuzzy logika, višekriterijumsko odlučivanje, ocenjivanje eksperata
    ... beeline distance of 10 km from the town of Jajce to the north. The longer axis of deposit L-29C rends west-to-east (140 m), and the shorter axis is perpendicular (15 m long, apering out to 1 m in the east). The ore body is vertical. T'he deposit is close to he land surface, at a depth of about 100 m ...

  • Application of stochastic models for mine planning and coal quality control

    Dejan Stevanović, Božo Kolonja, Ranka Stanković, Dinko Knežević, Mirjana Banković (2014)
    ... the cases of 25, 100, and 169 layers in each bed. Gray circles represent the input data, horizontal axis corresponding to the cumulative mass of the coal stacked up until the moment, and vertical axis corresponding to the percentage of organic sulfur. Black circles represent the percentage of organic ...
    ... (thick), minimum, average and maximum (dashed) standard deviations vs. the number of layers were highlighted. Horizontal axis refers to the number of layers. Vertical axis refers to the standard deviation. An exponential curve was fitted to these experimen- tal points. The model derived for the ...

  • Numerical modelling of a single intra-oceanic subduction for the origin of the Balkan ophiolites

    Nikola Stanković, Vesna Cvetkov, Vladica Cvetković (2024)

  • The influence of Al<sup>3+</sup>ion on porcine pepsin activity<i>in vitro</i>

    Vesna M. Pavelkić, Kristina R. Gopcević, Danijela Z. Krstić, Marija A. Ilić (2008)
    The in vitro effect of Al3þ ions in the concentration range 1.7·1026M–8.7·1023M on pepsin activity at pH 2, via kinetic parameters and its electrophoretic mobility was evaluated. Kinetic study demonstrated the existence of an activation effect of Al3þ at pH 2 on pepsin molecule. Kinetic analysis with respect to concentrations of haemoglobin showed that Al3þ ions increase the maximal velocity (Vmax) and kcat values rather than apparent affinity for substrate (KS) implying the non-competitive nature of activation which indicated ...
    Пепсин, алуминијум, кинетика, активација, електрофоретска мобилност
    ... from that in its absence, are linear [29,30]. "The intercepts ofa plot 1/Aslope and 1/Aintercept vs. 1/ [AF** ] on 1/A axis, and intercepts of both plots on 1/ [AF?] axis are used for calculating equilibrium constants K,s and K,A for dissociation of formed binary enzyme-activator (AP' ) and ...
    ... of the velocity s. substrate concentrations at increasing concentrations of Al ions resulted in a family of linear plots intersecting at 1/[Hb] axis (Figure 2). The Lineweaver-Burk plots show that increase of reaction velocity in the presence of ALP?* ions is proportional to increased AI? ions ...

  • Application of a Method for Intelligent Multi-Criteria Analysis of the Environmental Impact of Tailing Ponds in Northern Kosovo and Metohija

    Gordana Milentijević, Blagoje Nedeljković, Milena Lekić, Zoran Nikić, Ivica Ristović, Jelena Đokić (2016)
    flotacijska jalovišta, životna sredina, višekriterijumska analiza, ekologija, Trepča
    ... onal model. The PROMETHEE diamond solution is presented with the dot on (Phi+,Phi−) flat. The flat is at an angle of 45◦ so that the vertical dimension (red-green axis) corresponds to Phi net flow. A cone is drawn for every alternative. Cones A2 and A5 overlap, which indicates that these two alternatives ...
    ... s are completely dissimilar. Criteria with similar preferences are C5, C1 and C2 and C3, conflicting criteria are C9 and C4. The determination axis (red axis) suggests the alternative A3 tailing Žitkovac has the least favourable impact on the surrounding ecosystem. With implementation of estimation ...
    ... dot found on the GAIA plan. The position of these alternatives is connected with the marks of a set of criteria. Each criterion is presented with the axis from the center of the GAIA plan. The orientation of these axes shows how these criteria are interrelated. Alternative A4 and A5 are similar because ...

  • Praktikum za vežbe iz Informatike 1

    Ranka Stanković, Ivan Obradović, Olivera Kitanović, Mirjana Banković (2014)
    informatika

  • The number of unimodular roots of some reciprocal polynomials

    Dragan Stankov (2020)
    We introduce a sequence P2n of monic reciprocal polynomials with integer coefficients having the central coefficients fixed. We prove that the ratio between number of nonunimodular roots of P2n and its degree d has a limit when d tends to infinity. We present an algorithm for calculation the limit and a numerical method for its approximation. If P2n is the sum of a fixed number of monomials we determine the central coefficients such that the ratio has the minimal limit. ...
    Algebraic integer, the house of algebraic integer, maximal modulus, reciprocal polynomial, primitive polynomial, Schinzel-Zassenhaus conjecture, Mahler measure, method of least squares, cyclotomic polynomials

  • Hydrochemical features and their controlling factors in the Kucaj-Beljanica Massif, Serbia

    Fen Huang, Ljiljana Vasic, Xia Wu, Jianhua Cao, Saša Milanovic (2019)
    Earth-Surface Processes, Geology, Pollution, Soil Science, Water Science and Technology, Environmental Chemistry, Global and Planetary Change

  • Exhumation history of the Juhor Mts. in central Serbia, the Northern Serbo–Macedonian Subunit

    Uros Stojadinovic, Hannah Pomella, Nemanja Krstekanić, Bojan Kostić, Maja Maleš, Nikola Randjelovic, Miloš Radonjić (2024)
    Northern Serbo–Macedonian Subunit, low-t thermochronology, kinematic analyses, extensional deformations

  • Differently shaped nanocrystalline (Fe, Y)3O4 and its adsorption efficiency toward inorganic arsenic species

    Biljana P Dojčinović, Boštjan Jančar, Lotfi Bessais, Aleksandar Kremenović, Nataša P Jović-Jovičić, Predrag T Banković, Dalibor M Stanković, Miloš Ognjanović, Bratislav V Antić (2019)
    Herein we report effects of partial substitution of Fe3+ by Y3+ in magnetite (Fe3O4) on morphology and inorganic arsenic species adsorption efficiency of the Fe3−xYxO4 nanoparticles formed. The series of Fe3−xYxO4 (x=0.00, 0.042 and 0.084, labeled as Y00, Y05 and Y10, respectively) was synthesized using co-precipitation followed by microwave-hydrothermal treatment (MW) at 200°C. With increase of yttrium content(xvalue), both the morphological inhomogeneity of the samples and the fraction of spinel nanorods as compared to spinel pseudospherical particles increased. By ...
    microstructure, microwave-hydrothermal synthesis, adsorption, magnetic nanoparticles, arsenic