Претрага

Упит dcterms_subject_txt:green pellet testing

174 items

  • Influence of DEM resolution on numerical modelling of debris flows in RAMMS - Selanac case study

    Jelka Krušić, Biljana Abolmasov, Mileva Samardžić Petrović (2019)
    Debris flows induced by intensive rainfall represent very hazardous phenomena in many parts of the World. Methods for prediction of runout distance of flow like mass movements are different and depending on the input data, rheology, and available or appropriate numerical solution. However, sometimes it is not easy to obtain pre event and post event high-resolution data in the rural or mountainous area. Thus, the topology of terrain is the most important input parameter for the every real case ...
    tecišta, modeliranje, RAMMS, DEM
    ... depth and deposition (Fig. 4) were provided after scanning of surface topology with resolution 5x5m in April 2017. Those input data were used for testing numerical model and results were compared with previously obtained 30x30m resolution topology input data and results (Krušić et al, 2018). The influence ...
    ... transported further with torrential flow which also made instabilities in the Selanačka river valley. Generally it is necessary for further research to testing model with influence of the torrential flood on the deposition zone in the same time as Selanac debris flow. Also it is supposed that using some ...
    ... McArdell BW, Oggier N, Baer P, Christen M, Vieli A (2017) Debris flow modeling at Meretschibach and Bondasca catchment, Switzerland: sensitivity testing of field-data-based entrainment model. Natural Hazards and Earth System Sciences 17: 801-815. Hungr O (1995) A model for the runout analysis ...

  • Numerical Models of Debris Flows with Entrainment Analysis-Case Studies from the Republic of Serbia

    Jelka Krušić , Biljana Abolmasov, Miloš Marjanović (2021)
    The results of material entrainment analysis in RAMMS debris flow software, as well as numerical models of final flow heights for two case studies from the Republic of Serbia are presented. Both of debris flow cases started with initial sliding of huge volume block, prolonging to behave as flowing process. Results of the analysis showed that entrainment material affects final results of transportation model, runout distance, deposition area and volume of debris flow. In both cases entrainment volume is very ...
    tecišta, zadržavanje nanosa, RAMMS, validacija

  • Phase relations and physical indicators of municipal waste from old landfills in Serbia

    Dragoslav R Rakić, Irena G Basarić Ikodinović, Jovana M Janković, Tina D Đurić (2021)
    Due to certain similarities of municipal waste and soil, usually for the determination of basic parameters of physical state, laboratory and field tests which are common in geotechnical investigations are used. It is often to construct an apparatus for special purpose to perform some specific laboratory and field tests. Therefore, different values of indicators of municipal waste physical state can be found in the literature. The basic reasons should be found in different definitions and methods that researchers use ...
    municipal waste, moisture content, unit weight, specific gravity, grain size distribution, porosityGeneral Computer Science
    ... standard geomechanical laboratory equipment. In addition, average values of these parameters based on literature data, as well as results obtained by testing the old municipal waste from two landfills in Serbia (closed landfill Ada Huja in Belgrade and city landfill in Novi Sad) will be presented. ...
    ... by exploratory drilling: or by digging exploratory pits. After that, the waste was sorted, classified and samples were prepared for further testing (Figure 1). Because of the fact that waste components cannot be easily identified, as well as because differences in the choice m #i.i| ii ...
    ... Therefore, only porosity between particles was analysed in this paper. For the determination of void ratio, artificially prepared samples for testing of shear strength and compressibility of municipal waste (44 samples in total) were used. They were grouped in four characteristic series with ...

  • Investigation of quantitative indicators of anisotropy based on longitudinal elastic waves propagation velocities with uncertainty

    Miloš Gligorić, Jelena Majstorović, Suzana Lutovac (2018)
    ... ultrasonic in rock mass investigations are numerous and become necessary part of testing program more and more. This is especially significantly due to the fact that ultrasonic investigation is the way of testing without fracture of rock samples. Measuring longitudinal elastic waves propagation ...
    ... weathering. Polymer Degradation and Stability, 91, pp. 3083–3096. FORT R., DE BUERGO M. A. and PEREZ-MONSERRAT E. M. (2013) Non- destructive testing for the assessment of granite decay in heritage structures compared to quarry stone. International Journal of Rock Mechanics and Mining Sciences ...
    ... PETRUŽÁLEK M. et al. (2008) Changes of anisotropy of p-wave velocity propagation during deformation process of rock samples. In: 28-European Conf. AE Testing, Ewgae 2008, Cracow UT. Cracow. SOUSA L. M. O. et al. (2005) Influence of microfractures and porosity on the physicomechanical properties and ...

  • Overview of the hydrogeological investigations of recently discovered world class deposits in Serbia

    Nebojša Atanacković, Vladimir Živanović, Veselin Dragišić, Sava Magazinović (2019)
    Europe industry has growing concerns on availability of the raw materials. To address this challenge, the European Commission has created a list of critical raw materials for the EU, launched EIT Raw Materials initiative, and continuously support research projects (like INTRAW, UNEXMIN etc.) with the aim of reducing the dependency and meeting growing demands. In the last 15 years Serbia is experiencing new bust in geological exploration of mineral deposits. Currently 167 exploration licenses are active, covering approximately 6000 ...
    Groundwater, Raw materials, Lithium, Mining, Field hydrogeology

  • Analysis of the Influence of Burden Deviation from the Designed One on the Intensity of the Blast Vibration

    Stefan Milanović, Lazar Kričak, Milanka Negovanović, Nikola Simić, Jovan Marković, Nikola Đokić (2023)
    This paper presents an analysis of the influence of burden deviation from the designed one on the intensity of blasting vibrations through the use of laboratory and field examinations. By definition, the burden represents the shortest distance from the axis of an explosive column charge to the free surface. It should be measured along the entire hole length, although, in practice, it is often measured only on the bench surface as the shortest distance from the axis of the ...
    linija najmanjeg otpora, 3D model, miniranje, potresi usled miniranja, slobodna površina

  • Towards Better Valorisation of Industrial Minerals andRocks in Serbia—Case Study of Industrial Clays

    Vladimir Simić, Dragana Životić, Zoran Miladinović (2021)
    Management, Monitoring, Policy and Law,Nature and Landscape Conservation
    ... determining the optimal testing network and the length of individual testing intervals, we again encounter the formalism in the Rulebook, which completely indiscriminately (depending on the morphogenetic shape of the deposit and raw material quality) defines an almost uniform testing methodology, leaving ...
    ... papers in Russian [70,71] address the issue of testing clay deposits and emphasize the need to adapt testing methods and analyses to specific types of raw materials and deposits. Novel studies on the assessment of industrial clays give improved testing procedures and analytical techniques [21] as well ...
    ... regulatory framework in Serbia, access to land necessary for exploration/exploitation, current practise related to geological explo- ration including testing procedures and analyses, and actual standards for reporting of exploration results, mineral resources, and ore reserves in Serbia. The industrial ...

  • Model upravljanja investicionim projektima otvaranja površinskih kopova uglja

    Cvjetko P. Stojanović (2015-04-27)
    Brze promene u okruženju pred rukovodioce postavljaju mnogobrojne zahteve,pre svega, one koji se tiču ostvarenja ciljeva u zadatom vremenu i raspoloživimsredstvima što zahteva fleksibilan pristup u organizovanju aktivnosti i efikasnost unjihovom sprovođenju.Upravljanje projektima, bilo koje vrste, suštinski, predstavlja veoma složenproces odlučivanja uslovljen velikim brojem ulaznih faktora. Ti faktori treba daomoguće fokusiranje na prioritete i ciljeve, praćenje realizacije, fleksibilnost uprevazilaženju teškoća, prilagođavanje promenama, te kontrolu nad ostvarenimrezultatima. Ovakav način upravljanja zahteva korišćenje proverenih tehnika i alata tetimski rad angažovanih na ...
    Projekat, upravljanje, metodologija, površinska eksploatacija, model

  • Model upravljanja investicionim projektima otvaranja površinskih kopova uglja

    Cvjetko P. Stojanović (2015-04-27)
    Brze promene u okruženju pred rukovodioce postavljaju mnogobrojne zahteve,pre svega, one koji se tiču ostvarenja ciljeva u zadatom vremenu i raspoloživimsredstvima što zahteva fleksibilan pristup u organizovanju aktivnosti i efikasnost unjihovom sprovođenju.Upravljanje projektima, bilo koje vrste, suštinski, predstavlja veoma složenproces odlučivanja uslovljen velikim brojem ulaznih faktora. Ti faktori treba daomoguće fokusiranje na prioritete i ciljeve, praćenje realizacije, fleksibilnost uprevazilaženju teškoća, prilagođavanje promenama, te kontrolu nad ostvarenimrezultatima. Ovakav način upravljanja zahteva korišćenje proverenih tehnika i alata tetimski rad angažovanih na ...
    Projekat, upravljanje, metodologija, površinska eksploatacija, model

  • Spatial and temporal variability of precipitation in Serbia for the period 1961-2020

    Boško Milanović, Phillip Schuster, Milan Radovanović, Vesna Ristić Vakanjac, Shristoph Schneider (2017)
    У овом раду анализиране су месечне, сезонске и годишње суме падавина у Србији за период 1961–2010. Географска ширина, дужина и надморска висина 421 падавинске станице и карактеристике терена у њиховом блиском окружењу (нагиб и аспект терена у радијусу од 10 км око станице) коришћене су за развој регресионог модела на основу којег је прорачуната просторна расподела падавина. Приказан је просторни распоред годишњих, јунских (максималне вредности за скоро све станице) и фебруарских (минималне вредности за скоро све станице) падавина. Годишње ...
    padavine, distribucija godišnjih padavina, distribucija mesečnih padavina, Republika Srbija

  • Дефинисање археолошких објеката на локалитету Кремените њиве применом Ојлерове 3Д деконволуције на магнетометријске податке

    Весна Цветков, Илија Васиљевић, Бранислав Сретеновић, Весна Дамњановић (2018)
    ... aeological research. For  this purpose Euler 3D deconvolution  (O3DD) was used on  magnetic data. In order to get the best input parameters, O3DD testing was first performed on synthetic  models.  METHODS    Magnetic measurements are based on the measurement of the Earth's magnetic field. The unit  ...
    ... tion the  values of the total magnetic intensity (TMI) are used. The total area of the surveyed site is 2827  m2.    RESULTS AND DISCUSSION    Testing  Standard and  Located O3DD on  synthetic data has  shown  that both methods  succes‐ sfully determine the depths to the sources. For shallow sources ...
    ... to  the sources of anomalies on a  large surface. The  justification of using the method on data collected  in  the  investigated area was made by testing on synthetic data. Although  it was possible to clearly deter‐ mine the edges of the sources of anomalies by the test, on the data from the site K ...

  • Definisanje parametara čvrstoće na smicanje kod izvođenja kosina u ispucalom stenskom masivu

    Zoran M. Berisavljević (2016-04-01)
    Definisanje parametara čvrstoće na smicanje ispucalih stenskih masa predstavlja jedanod najzahtevnijih zadataka mehanike stena. Geotehnička istraživanja su uglavnomograničena na rezultate laboratorijskih ispitivanja malih makroskopski homogenihuzoraka, sa kojih se vrši ekstrapolacija rezultata na terensku razmeru. Ispitivanja semogu vršiti in situ, ali su i ona ograničena veličinom korišćene aparature imikrolokacijom na kojoj se vrše ispitivanja. Pored toga, moguće je vršiti različitaispitivanja na fizičkim modelima, koja su veoma složena i skupa. Ekstrapolacijapodataka sa malog uzorka na terensku razmeru daje mnogo bolje rezultate ...
    naponsko stanje, ispucalost, heterogenost, čvrstoća na smicanje, geološki indeksčvrstoće, Hoek-Brownov materijal, kompozitni uzorci, dezintegracija, povratna analiza

  • Dvodimenzionalna geometrijska morfometrija prvih gornjih molara hominina sa teritorije Srbije - taksonomska i metodološka analiza

    Predrag N. Radović (2022)
    Primarni cilj ove studije tiče se taksonomske identifikacije fosilnih prvih gornjih molara (M1) hominina pronađenih u Srbiji, primenom metoda dvodimenzionalne (2D) geometrijske morfometrije. U prvoj (metodološkoj) fazi istraživanja ispitana je efikasnost 16 različitih pristupa (geometrijskih modela) u klasifikaciji M1 neandertalaca i anatomski modernog čoveka. Modeli su testirani na dva seta okluzalnih projekcija krunica (n = 34 i n = 64) dobijenih orijentisanjem digitalnih 3D modela u virtuelnom okruženju ili fotografisanjem fizičkih primeraka zuba. Prilikom testiranja primenjena je klasifikacija zasnovana ...
    2D geometrijska morfometrija, prvi gornji molar (M1), taksonomska identifikacija, neandertalci, anatomski moderni ljudi, Pešturina, Velika Balanica, Srbija

  • Mesozoic carbonate rocks in Serbia used as dimension stone

    Vesna Matović, Tijana Vojnović Ćalić (2016)
    The building industry in Serbia uses, to a great extent, imported natural stone for architectural purposes. The significance of local deposits, particularly limestones, is not adequately perceived despite the country’s abundance of these valuable resources. Therefore, this study focuses on Serbia’s Mesozoic carbonate rocks, specifically on the deposits of four selected quarries: Klisura, Skrzut, Struganik, and Tisnica. The quality and prospects of the application of these limestones has not yet been the subject of a detailed, comprehensive investigation. Therefore, ...
    Ukrasni kamen, Mezozoik, Krečnjak, Srbija, Petrografija, Fizičko-mehanička svojstva
    ... Springer, Berlin, pp 110 SRPS B.B8.032 (1980) Testing of natural stone—determination of bulk density, density, coefficient of density, and porosity SRPS B.B8.010 (1981) Testing of natural stone—determination of water absorption SRPS B.B8.001 (1982) Testing of natural rock—freezing test for natural ...
    ... equally credible laboratories: the Laboratory of the High- way Institute (Laboratory for Stones and Stone Aggregates) and the Institute for Testing: of Materials-IMS Institute (Laboratory for Stones and Stone Aggregates) in Belgrade. The bulk density was determined according to the standard ...
    ... natural stone SRPS B.B8.015 (1984) Wear test—87rinding wheel method SRPS B.B&.012 (1987) Natural stone—testing: of compressive strength SRPS B.B3.200 (1994) Natural building stone—slabs for facing and flooring—technical requirements (withdrawn) SRPS EN 12058 (2009) Natural stone products—slabs ...

  • Investigation of Co0.9Ho0.1MoO4 Nanopowders Obtained by Glycine Nitrate Procedure

    Milena Rosić, Maja Milošević, Maria Čebela, Vladimir Dodevski, Vesna Lojpur, Radomir Ljupković, Aleksandra Zarubica (2023)
    ... as a possible new approach in inorganic synthesis methodology. During photocatalytic testing, the studied nanoparticle powder indicated a potentially i promising solution in photocatalytic processes toward green chemistry and sustainable development. Keywords: X-ray diffraction, Electron microscopy ...

  • Depth estimation of archeological objects using Euler 3D deconvolution of magnetic data

    Vesna Cvetkov, Ilija Vasiljević, Mirko Petković (2015)

  • Дефинисање механичких својстава алтерисаног стенског материјала лабораторијским методама

    Вељко М. Рупар (2022)
    Основни циљ овог рада је да представи методологију одређивања механичких својстава хетерогеног стенског масива који изграђују дацит (Д) и алтерисани дацит (АД), где је уочена је зона постепеног преласка од алтерисаног дацита до дацита. Механичка својства стенског масива у тој зони утврђена су на основу лабораторијских испитивања једноосне и троосне чврстоће на притисак стенског материјала композитних узорака. Композитни узорци су се састојали од дискова стенског материјала, при чему је висина дискова h дефинисала различити процентуални удео појединог стенског материјала, ...
    дацит, алтерисани дацит, једноосна чврстоћа на притисак, троосна чврстоћа на притисак, композитни узорци, механика стена, стабилност косина

  • Geofizičko reflektivno sondiranje kao test integriteta betonskog šipa

    Jovo Jakišić (2024)
    Temelj predstavlja izuzetno bitan element svakog građevinskog objekta. Zbog toga je neophodno poštovati odgovarajuće standarde, u projektovanju i izvođenju temeljne konstrukcije.Šipovi predstavljaju jedan od načina dubokog fundiranja tj. temeljenja. Za svaki izvedeni šip pojedinačno neophodno je izvesti kontrolu kvaliteta. Postoji više postupaka kojima je mogućeizvršiti kontrolu kvaliteta, a jedan od njih je test integriteta šipa malom silom, koji je prikazan u ovom radu.Ovaj postupak se izvodi seizmometrijskom metodom, postupkom refleksije, koji je definisan međunarodnim standardom ASTM D5882.Podaci koji su prikazani ...
    temelj, šip, seizmometrijska metoda
    ... Structural Sizes - D653 Terminology Relating to Soil, Rock, and Contained Fluids - D1II143 Method of Testing Piles Under Static Axial Com- pressive Load - D4945 Test Method for High Strain Dynamic Testing of Piles Definicija izraza specifičnih za ovaj standard: - integritet šipova, n-kvalitativna ...
    ... Magistarski Rad: „Teorija ı primena propagacije naponskih talasa u ispitivanju šipova“ ASTM D5882-00 Standard Test Method for Low Strain Integritiy Testing of Piles PET User Manual. URL: www.piletest.com/products 22 IZJAVA Izjavljujem da sam samostalno izradio završni rad koji mi je odobrila Katedra ...

  • Contribution to the geotechnical classification of municipal waste landfills in Serbia

    Dragoslav Rakić, Irena Basarić, Laslo Čaki, Slobodan Ćorić (2018)
    Management, Monitoring, Policy and Law, Nature and Landscape Conservation, Geochemistry and Petrology, Waste Management and Disposal,Geotechnical Engineering and Engineering Geology,Water Science and Technology,Environmental Chemistry,Environmental Engineering

  • The Importance of Geotechnical Investigations for the Construction of Transfer Station „Prelići“ on Landfill in Cacak – Serbia

    Dragoslav Rakić, Irena Basarić, Jovana Janković, Tina Đurić (2019)
    For the purpose of the facilities construction within the transfer station „Prelici“ in Cacak, specific geotechnical investigations were carried out based on which the technological project with the facilities schedule was developed. Significant deviations in relation to the presented results were determined during earthworks, so the additional geotechnical investigation works were carried out. Since the new investigation works have determined a different cross section of the terrain, it was proposed to move the planned facilities which led to the ...
    landfill, geotechnical investigations, transfer station
    ... additional geotechnical investigations (exploration drilling, mapping of existing exploration pitches, geophysical research, laboratory geomechanical testing) were made, which determined the relatively complex construction of the terrain on the part planned for the construction of the transfer station ...
    ... municipal waste and its cover (Figure 3). Certain differences related to the definition of groundwater level as well as laboratory geomechanical testing of natural layers (especially parameters of shear strength and compressibility) have been noted. Municipal solid waste (MSW), is separated into ...