Претрага

Упит dcterms_subject_txt:green pellet testing

174 items

  • Analiza uporednog praćenja temperature površine ohlađenih materijala pri njihovom zagrevanju do ambijentalne temperature

    Stevan Đenadić, Ljubiša Tomić, Vesna Damnjanović, Katarina Nestorović (2021)
    U datom eksperimentalnom radu su termografskim metodama ispitivane termofizičke karakteristike različitih materijala. Za ispitivanja su izabrani mesingani niovčić, ugalj i pelet, jer imaju različita termoizolaciona svojstava i različito stanje površine. Uzorci su najpre hlađeni, a zatim je njihovo zagrevanje na sobnoj temperaturi praćeno termalnom kamerom. U drugom delu eksperimenta, korišćena je impulsna termografija, a zagrevanje površine uzoraka vršeno je svetlosnom pobudom.
    termografija, impulsna termografija, nedestruktivno testiranje materijala, mesing, ugalj, pelet

  • Primena termografije u rudarstvu

    Stevan Đenadić, Vesna Damnjanović, Predrag Jovančić, Dragan Ignjatović, Dragutin Jovković, Filip Miletić (2019)
    Danas, gotovo da nema oblasti u nauci i tehnici u kojoj se Infracrvena termografija ne primenjuje kao metoda za lociranje i praćenje zagrejanih objekata ili tela, beskontaktnu procenu temperature površina, i nedestruktivno ispitivanje materijala. U radu su prikazane mogućnosti i perspektive primene ove metode u oblasti rudarstva.
    infracrvena termografija, rudarstvo, monitoring
    ... used as a method for locating and monitoring heated objects or bodies, contactless surface temperature estimation and non-destructive material testing. This paper presents the possibilities and prospects of applying this method in the field of mining. Key words: infrared thermography, mining ...

  • Synthesis, characterization and photocatalytic examination of Co0.9Ho0.1MoO4 nanopowders

    Milena Rosić, Maja Milošević, Maria Čebela, Vladimir Dodevski, Vesna Lojpur, Radomir Ljupković, Aleksandra Zarubica (2023)
    ... approach in the methodology of inorganic synthesis. During photocatalytic · testing nanostructured material CopoHoo,MoOu indicated the possibility of a promising solution in photocatalytic processes towards green chemistry and sustainable development. 1. M. Rosić, A. Zarubica, A. Šaponjic' ...
    ... Institute of Nuclear Sciences "Vinča”, University of Belgrade Faculty of Mechanical Engineering, University of Belgrade Center of Excellence for Green Technologies, Institute for Multidisciplinary Research, University of Belgrade Faculty of Technology and Metallurgy, University of Belgrade e Z ...
    ... Institute of Nuclear Sciences *Vinča”, University of Belgrade Faculty of Mechanical Engineering, University of Belgrade Center of Excellence for Green Technologies, Institute for Multidisciplinary Research, University of Belgrade Faculty of Technology and Metallurgy, University of Belgrade PROGRAMME ...

  • A hydrogeological model of the open-cast mine Tamnava - West Field (Kolubara Coal Basin, Serbia)

    Jelena Ratković, Dušan Polomčić, Dragoljub Bajić, Bojan Hajdin (2016)
    ... METHODOLOGY A hydrogeologic model is an interpretation of the dynamic and physical properties of a hydrogeologic system (American Society for Testing and Materials, 2014). According to Polomčić (2001), a hydrologic system is determined by: input elements, characteristics of the medium, processes ...
    ... 2013”. Belgrade: Yugoslav Opencast Mining Committee, pp. 293-300. 54 Ratković J., Polomčić D., Bajić D., Hajdin B. THE AMERICAN SOCIETY FOR TESTING AND MATERIALS (2016) Available from: http://www.astm.org/DATABASE.CART/WITHDRAWN/D5447.htm [Acessed 23/11/16]. ŠUBARANOVIĆ, T., PAVLOVIĆ, V. and ...

  • Грешка инклинације код депозиционе реманетне магнетизације

    Mirko Petković, Vesna Cvetkov (2019)
    ... inclination of the depositional remanent magnetization, that is, that the inclination value before and after the experiment did not coincide. Laboratory testing on natural sediments confirmed the occurrence of an inclination error, i.e. shallowing of the inclinations of the depositional remanent magnetization ...
    ... measuring the anisotropy of the remanent magnetization of the individual minerals in the sample. Since this process requires weeks of laboratory testing and the use of a large number of instruments, much faster, numerical, techniques are developed. One of them is the determination of the inclination ...

  • Quantitative landslide risk assessment in the city of Tuzla

    Miloš Marjanović, Biljana Abolmasov, Cvjetko Sandić, Miralem Mulać, Petar Begović (2021)
    In the climate-changing conditions, geological environment interacts more dramatically with the urban fabric than before. The urbanization is expansive and more aggressive than before, but so are the weather extremes and long-term climate trends. In effect, many processes which can be triggered by either side, nature or engineering, are becoming more pervasive than before, and such is the case with landslides. Dealing and managing landslides requires few crucial steps, starting from collecting data on landslide location and typology – ...
    "landslides", "risk assessment"
    ... including geological, geomorphologic and environmental factors, as well as synthetic GIS-based derivatives; splitting the area into training and testing/validating parts; training the Machine Learning algorithm, Support Vector Machines in particular, over a reasonable training sample size (25-33%) ...
    ... factors – optimizing the model – fitting the classification function; applying the classification function to the unseen instances in the remaining testing/validating area; outputting a map of extrapolated landslide and non- landslide pixels over the entire area of interest. ● Landslide quasi-hazard ...

  • Adaptive neuro-fuzzy prediction of operation of the bucket wheel drive based on wear of cutting elements

    Filip Miletić, Predrag D. Jovančić, Milos Milovančević, Dragan Ignjatović (2020)
    The capacity of the rotor excavator depends largely on the operation of the subsystem for digging. There is a great contribution to the correct and sharp teeth when the capacity is the highest. In the function of time, the teeth become clogged due to abrasive wear, or changes in their geometric shape. To analyze the bucket wheel drive in depend on wear of the cutting elements in this study adaptive neuro fuzzy inference system (ANFIS) approach was implemented. ANFIS ...
    Pogon rotornog točka, habanje, rezni elementi, ANFIS

  • Non-Detonating Chemical Mixture for Non-Invasive Methods of Rock Breaking

    Lazar Kričak, Milanka Negovanović, Nikola Simić, Stefan Milanović (2024)
    Within the Innovation developed several different non-detonating chemical mixtures for non-invasive methods of rock breaking. Laboratory and polygon tests gave the satisfactory results and knowledge enough to start the practical experiments in the field. The basis of this innovation is a theoretical assumption that certain chemical mixtures release a large quantity of gases during combustion. If these gases are found in the enclosed space a growing pressure on the walls of the chamber in which combustion takes place will ...
    non-detonating, chemical mixture, rock breaking, borehole pressure

  • Machine Learning and Deep Neural Network-Based Lemmatization and Morphosyntactic Tagging for Serbian

    Ranka Stanković, Branislava Šandrih, Cvetana Krstev, Miloš Utvić, Mihailo Škorić (2020)
    The training of new tagger models for Serbian is primarily motivated by the enhancement of the existing tagset with the grammatical category of a gender. The harmonization of resources that were manually annotated within different projects over a long period of time was an important task, enabled by the development of tools that support partial automation. The supporting tools take into account different taggers and tagsets. This paper focuses on TreeTagger and spaCy taggers, and the annotation schema alignment ...
    Part-of-Speech tagging, lemmatization, corpus, evaluation, Serbian, morphological dictionary
    ... MULTEXT-East resources (Krstev et al., 2004)). 2.2. Pre-annotated texts Various pre-annotated texts were used in this research for training and testing. These texts were tagged mainly us- ing SMD (and its tagset) and the Unitex system,1 with manually performed disambiguation. Besides the basic SMD ...
    ... FLOODS 4,671 1,798 3,813 1,741 HISTORY 6,596 2,726 5,287 2,622 NOVELS 5,118 2,117 4,236 2,093 Table 2: Pre-annotated texts used for training and testing of the spaCy tagger and the TreeTagger TT19 3. Tagging 3.1. Tagsets The basic set of PoS-categories/tags that should be as- signed to tokens is ...
    ... some PoS differ between tagsets (e.g. ADJ in UPoS vs. A in SMD for adjective). 3.2. Harmonization of annotation schema Texts used for training and testing (presented in Section 2.) were produced over the last 15 years for different purposes. This resulted in many differences and inconsistencies in ...

  • English for Geology Students. 1

    Lidija Beko (2023)
    Engleski jezik
    ... like their colleaguesin other fields, have developed a scientific method based on observation and collection of data, formu- lation and testing of hypothe- ses,leadingto the formulation oflaws or principles. This study expanded in the 1950s, as humanity began to explore space. One ...

  • Properties of fly ash and slag from the power plants

    Miloš Šešlija, Aleksandra Rosić, Nebojša Radović, Milinko Vasić, Mitar Đogo, Milovan Jotić (2016)
    This paper describes the physical, chemical and mineral properties of ash and slag, which were taken from thermal power plants Nikola Tesla A, Nikola Tesla B, Kostolac A and Kostolac B. The knowledge of the mineralogical material composition is important because the type of minerals directly determines the properties of the fly ash and slag and their possible application. Laboratory tests showed that ash and slag samples consist of the following minerals: amorphous materials, quartz, feldspar, mullite, melilite, cristobalite, ...
    fly ash, slag, physical composition, chemical composition, mineral composition, X-ray diffraction method
    ... mineral composition) of ash and slag from the Ko- lubara and Kostolac coal basins, the research objectives presented in this paper are the laboratory testing and research of the physi- Properties of fly ash and slag from the power plants Miloš Šešlija1, Aleksandra Rosić2, Nebojša Radović1, Milinko Vasić1 ...
    ... Denmark) – in Serbian, with an English Abstract].– Unpubl. PhD Thesis, Faculty of Sciences, University of Niš, 38 p. EN 451-2 (1994): Method of testing fly ash – Part 2: Determination of fineness by wet sieving. EN 933-1 (1997): Tests for geometrical properties of aggregates – Part 1: Determination ...

  • Smanjenje sleganja plitkih temelja primenom mikrošipova

    Slobodan Ćorić, Dragoslav Rakić (2021)
    Mikrošipovi su šipovi malog prečnika koji se grade tako što se u tlu specijalni postupkom formira bušotina koja se zatim armira i injektira. Njihov prečnik je najčešće 150 – 300 mm, a dužina može da bude i više desetina metara. Mikrošipovi mogu da se grade u svim vrstama tla i mogu da budu vertikalni i kosi. Oni se, stoga, koriste kao zamena za konvencionalne šipove i ankere. Primena mikrošipova u fundiranju predstavlja jedan savremeni način izgradnje i sanacije temelja/objekata. ...
    mikrošipovi, sleganje plitkih temelja i mikrošipova, krutost tla i mikrošipova

  • INVENTS: A Hybrid Mine Ventilation Planning and Design System

    Lilić Nikola, Stanković Ranka, Obradović Ivan (2013)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    hybrid systems, mine ventilation, expert systems
    ... the system was developed enable a dynamic communication between different phases of the outlined concept, leading to unlimited possibilities for testing different modifications of the system until a final solution satisfying the established criteria is obtained. Planing of required air flow quantities ...

  • Project BEWARE—Landslide Post-disaster Relief Activities for Local Communities in Serbia

    Biljana Abolmasov, Dobrica Damjanović, Miloš Marjanović, Ranka Stanković, Velizar Nikolić, Sandra Nedeljković, Žarko Petrović (2017)
    ... incorporated in strategies for project sustainability. WP7—Landslide Hazard Maps—Modeling landslide hazard using quick and simple methods, but also testing the state-of-the-art techniques, and producing maps of spatial hazard potential (susceptibility maps). WP8—Identification of critical sites—Identifying ...

  • INVENTS: a hybrid system for subsurface ventilation analysis

    Nikola Lilić, Ranka Stanković, Ivan Obradović (2000)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    ... the system was developed enable a dynamic communication between different phases of the outlined concept, leading to unlimited possibilities for testing different modifications of the system until a final solution satisfying the established criteria is obtained. Planing of required air flow quantities ...

  • Preliminary regional landslide susceptibility assessment using limited data

    Igor Peshevski, Milorad Jovanovski, Biljana Abolmasov, Jovan Papic, Uroš Đurić, Miloš Marjanović, Ubydul Haque, Natasha Nedelkovska (2019)
    In this paper a heuristic approach for preliminary regional landslide susceptibility assessment using limited amount of data is presented. It is called arbitrary polynomial method and takes into account 5 landslide conditioning parameters: lithology, slope inclination, average annual rainfall, land use and maximum expected seismic intensity. According to the method, in the first stage, a gradation is performed for each of the carefully selected conditioning parameters by assigning so called rating points to the grid cells on which the ...
    klizišta, podložnost
    ... repetition of the validation pro- cess is one approach to test model sensitivity (LEE & TALIB, 2005; GUZZETTI et al., 2006). Other approaches for testing the sensitivity of a particular landslide susceptibility model (and not by comparison with other models) or evaluating its quality, reli- ability ...
    ... more robust model, with an adjusted, more realistic distribution of landslide susceptibility classes. It is hereby recommended that sensitivity testing be applied as a standard post-processing procedure in any regional heuristic landslide susceptibility analysis, and especially for cases with limited ...
    ... limited amounts of data for the landslide conditioning factors’ variability and properties of the landslides. In order to improve the sensitivity testing method presented herein, and test its reli- ability for use in more advanced landslide susceptibility ap- proaches, further studies are suggested: ...

  • Advantages and challenges in presenting mathematical content using EDX platform

    Marija Radojičić, Ivan Obradović, Ranka Stanković, Olivera Kitanović, Roberto Linzalone (2016)
    ... with non-linear structure, and xMOOCs, where courses are hyper-centralised, content-based, linear, and followed by automated, multiple-choice testing of learners’ understanding of the content [2, 3]. xMOOCs have become more popular after expansion of platforms such as edX, Coursera or Udacity ...

  • Numerical modeling of Selanac debris flow propagation using SPH code

    Jelka Krušić, Biljana Abolmasov, Miloš Marjanović, Manuel Pastor, Saeid M. Tayyebi (2021)
    The Selanac debris flow is a very huge event triggered after extreme rainfall caused by Cyclone Tamara activity in the Republic of Serbia in May 2014. The Selanac case study was already modelling in different programs using Voellmy rheology assumptions like RAMMS software. In this paper research are focusing particularly on the process of debris flowing from initiation zone to main deposition area using Geoflow SPH two-phase model considering frictional rheology law. Main rheological parameters are back-calculated using also ...
    debris flow, modelling, SPH code, DEM
    ... ’’Smoothed Particle Hydrodynamics: A Mesh free Particle Method’’. World Scientific: Singapore. Lucy, L.B. (1977) ‘’A numerical approach to the testing of fusion process’’. Astronomical Journal 1977; 82:1013–1024. Pastor, M., Fernández Merodo, J.A., Herreros, I., Mira, P., González, E., Haddad ...

  • Self-Engineering: Possibilities for Maintenance Operations in the Mining Machines Industry

    Steven Manders, Milorad Pantelić, Vladimir Milisavljević, Alberto Martinetti (2021)
    Self-engineering is a relatively new branch of knowledge that aims to understand how systems could “autonomously” re-configure or repair themselves without the intervention of the operators. A direct field of application is within the maintenance spectrum. Having systems or machines capable of self-detecting or even self-repairing could represent a game-changer, in capital asset fields such as the mining industry in particular. This paper aims to investigate the possible benefits and challenges of self-engineering / self-maintenance concerning mining machines, specifically bucket-wheel ...
    self-engineering, self-maintenance, maintenance operations, mining industry, bucket-wheel excavator, gearbox revitalization

  • New approach to correlation of hydrocarbon reservoirs in sandstone layers of the "Mokrin" field"

    Saša Ivanišević, Dejan Radivojević (2018)
    геофизички каротаж, депозиционе средине, лежишта угљоводоника, миоцен, пост‐ рифтнo, секвенциона стратиграфија
    ... ault, there are non‐ commercial quantities of gas  in  the wells KM‐3, 4 and 5  (Figure 1a and 1b). The data obtained  in  the  process  of well  testing  and  during  reservoir  engineering  indicate  that  the  Szeged  fault was  a  partial  barrier  in  the  process  of  hydrocarbon migration.    ...