Претрага

Упит dcterms_subject_txt:rainfall factors

253 items

  • Determining the Groundwater Balance and Radius of Influence Using Hydrodynamic Modeling: the Case Study of the Groundwater Source “Šumice” (Kikinda, Serbia)

    Dušan Polomčić, Dragoljub Bajić, Jelena Zarić (2015)
    A groundwater flow model was developed to simulate groundwater extraction from the public water supply source of the City of Kikinda. The hydrodynamic model includes the municipal groundwater source of Kikinda (Šumice and the Jezero Well), but also an extended area where there are groundwater sources that provide water supply to three factories: (MSK, TM and LŽT - Kikinda). Hydrodynamic modeling, based on the numerical method of finite differences will show the groundwater balance of the sources in the ...
    Water supply, Aquifer, Flow, Groundwater regime, Numerical modeling, Particle tracking
    ... to December 31, 2009) was several meters below the ground surface (4-7.3 m). Bearing in mind that the top layer is semi-permeable, the impact of rainfall infiltration on the groundwater regime is small. Ten-percent infiltration was used as the initial value of effective infiltration. Figure 8 shows ...
    ... research [1-3], water source optimization and sustainable development of water supply systems [4-6], drinking water supply [7], different types of factors and processes that influence water source performance [8], water quality [9, 10], and protection of water sources [6, 11]. The groundwater balance ...
    ... model of the groundwater sources that provide water supply to Kikinda is based on the simulation of three-dimensional groundwater flow. Natural factors, such as the type and characteristics of the represented geological units, the distribution of water-bearing and impermeable units, the seepage ...

  • Effectiveness Analysis of Different Bucket-wheel Excavators

    Stevan Đenadić, Predrag Jovančić, Dragan Ignjatović, Miloš Tanasijević, Filip Miletić (2021)
    Coal production in open-pit lignite mines in the Republic of Serbia is performed with continuous work systems. In addition to coal production, the same systems are used for the exploitation of large quantities of overburden. According to the reliability concept, continuous systems are in linear connection. If the failure occurs in one part of the system, that will produce a downtime of the entire system. The initial and most important factor of continuous systems is the bucket-wheel excavator. It ...
    bucket-wheel excavator, open-pit coal mine, mining, multi-criteria decision methods

  • Uticaj geološke neizvesnosti u razvoju rudarskih projekata

    Petar Marković, Dejan Stevanović, Mirjana Banković (2023)
    Rudarstvo je industrija koja se nosi sa različitim vrstama neizvesnosti i rizika zbog svoje prirode i specifičnosti. Neizvesnost u rudarstvu može poticati iz različitih izvora i uticati na različite aspekte rudarskih projekata. Kao jedan od dominantnih faktora, ističe se geološka neizvesnost. Geološka neizvesnost igra ključnu ulogu u rudarstvu i može značajno uticati na procenu resursa i rezervi, planiranje eksploatacije, ekonomsku isplativost i upravljanje rizicima. Ova neizvesnost se ne može eliminisati, ali se uz primenu adekvatnih standarda i zakona može ...
    ... mining can come from different sources and affect different aspects of mining projects. Geological uncertainty stands out as one of the dominant factors. Geological uncertainty plays a key role in mining and can significantly affect resource and reserve estimation, exploitation planning, economic ...

  • Simulation of Hydrogeological Environmental Discharge in Case of Interruption Constant Observations

    Marina Čokorilo Ilić, Dragoljub Bajić, Miroslav Popović (2024)
    Monitoring Network, data, hydrogeological environment, tunnel, simulation

  • Application of VIКOR method in the selection of an optimal splution of excavation “Borska Reka” ore deposit

    Sanja Bajić, Dragoljub Bajić, Branko Glušćević, Radmila Gaćina (2023)

  • Adsorption and degradation of some psychiatric drugs by sol-gel synthesized titania-based photocatalysts: influence of tungsten and sodium content

    Nina L. Finčur, Maja J. Šćepanović, Mirjana Grujić-Brojčin, Biljana F. Abramović, Jugoslav B. Krstić, Aleksandar Kremenović, Tatjana Srećković, Aleksandar Golubović (2019)
    Mesoporous anatase nanopowders were doped with 0.05−0.5 mol% of W6, in order to obtain more efficient photocatalyst than TiO2 Degussa P25 in the degradation of amitriptyline (AMI) under simulated solar irradiation (SSI). Dominant XRPD peaks were ascribed to anatase phase, with additional peaks which could correspond to brookite, TiO2 bronze and sodium titanate, Na2Ti9O19. The Raman scattering measurements have confirmed anatase as dominant phase, with broad Raman feature at ~270 cm−1 possibly related to Ti–O–Na stretching vibration. All W-doped ...
    Sol-gel synthesis, Doped titania nanopowders, XRPD, Raman spectroscopy, Adsorption and photocatalytic degradation, Psychiatric drugs

  • Uniaxial compressive strength test before and after standard fire test on rock mass

    Stefan Mitrović, Goran Todorović, Bojan Kostić, Milica Mirković-Marjanović, Nikola Božović, Marija Krstić, Aleksandar Erić, Radovan Gospavić, Snežana Ilić, Aleksandar Kijanović (2022)
    ... other grains in size and shape. The mentioned diversity indicates a wider area of erosion from different types of rocks which, due to various factors, disintegrated, giving the mentioned clasts. Muscovite is less presented in the rock. Of the mica minerals chlorite is also present. These mica ...

  • Availability as a dimension of energy security in the Republic of Serbia

    Boban Pavlović, Dejan Ivezić (2016)
    There is a range of modern approaches and models in literature for the evaluation and determination of energy security, which are based on different parameters and indicators. For most of them, a common characteristic is emphasizing the avail ability of energy, as an important dimension for ensuring energy security. In this paper, concise overview of Serbian energy sectors is given and appropriate energy indicators are defined and determined. Selected indicators provide insight into the main components that characterize availability ...
    raspoloživost energije, energetski indikatori, energetska bezbednost
    ... of energy security. For this reason, there is a tendency to formulate and develop models that should es- tablish correlations between the various factors of energy security, and finally, link them into a logical system. Multi-dimensional nature of energy security is the starting point of various ...
    ... timely manner with the energy price being at a level that will not adversely affect the eco- nomic performance of the economy. Thus, there are several factors that can influence the energy security [7]: – the availability of reserves, both indigenously and by foreign suppliers, – the ability of an economy ...

  • High-resolution sequence stratigraphy of carbonates - theory and examples

    Jelena Stefanović, Dejan Radivojević (2020)
    Циљ рада је да кроз теоријски аспект и примере примене представи секвенциону стратиграфију високе резолуције карбонатних седимената. У том смислу први део се односи на појам и значење високе резолуције у секвенционој стратиграфији. Од временских и просторних скала које одговарају сеизмичким профилима у последњих двадесет година метода је нашла примену на скалама које одговарају бушотинским подацима или изданцима. Као најпогоднији седименти за овај тип истраживања су се показали карбонати јер су осетљиви на еустатичке промене, а основе секвенционе стратиграфије ...
    изданак, системска група, јура-креда, карбонатна платформа, плитководна средина
    ... KERANS, C. 2020. Facies and sequence stratigraphic architecture of the Mural Limestone (Albian), Arizona: Carbonate response to global and local factors and implications for reservoir characterization. Sedimentology. 67. pp.1-34. BELKHEDIM, S., JAROCHOWSKA, E., BENHAMOU, M., NEMRA, A., RADOUANE ...
    ... 197–211. 80 SEVILLANO, A., BÁDENAS, B., ROSALES, I., BARNOLAS, A., & LOPEZ-GARCIA, J. 2020. Orbital cycles, differential subsidence and internal factors controlling the high-frequency sequence architecture in a Sinemurian shallow carbonate platform (Mallorca Island, Spain). Sedimentary Geology. ...

  • Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites

    Marija Šuljagić, Aleksandar Kremenović, Ivan Petronijević, Adis Džunuzović, Miljana Mirković, Vladimir Pavlović, Ljubica Anđelković (2023)
    To investigate the effect of synthesis procedure and sintering temperature on the functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS). The dielectric and ferroelectric measurements were performed in detail. Generally, the ...
    Perovskite/spinel ceramics, Multiferroic, Sintering, Influence of synthesis method

  • Mechanosynthesis and structural characterization of nanocrystalline Ce1–Y O2– (x=0.1–0.35) solid solutions

    Martin Fabián, Bratislav Antić, Vladimír Girman, Milica Vučinić-Vasić, Aleksandar Kremenović, Shigeru Suzuki, Horst Hahn, Vladimír Šepelák (2015)
    A series of nanostructuredfluorite-type Ce1–xYxO2–δ (0rxr0.35) solid solutions, prepared via highenergy milling of the CeO2/Y2O3mixtures, are investigated by XRD, HR-TEM, EDS and Raman spectroscopy. For thefirst time, complementary information on both the long-range and short-range structural features of mechanosynthesized Ce1–xYxO2–δ, obtained by Rietveld analysis of XRD data and Raman spectroscopy, is provided. The lattice parameters of the as-prepared solid solutions decrease with increasing yttrium content. Rietveld refinements of the XRD data reveal increase in microstrains in the host ceria ...
    Ceria, Yttrium, Solid solution, Mechanosynthesis, Oxygen vacancy, Nanocrystalline material

  • Application of machine learning for diagnosing the operation of a deep well pump in oil production

    Maja Trikić (2024)
    This paper will thoroughly examine how machine learning can improve the diagnosis of deep well pumps by analyzing the role and function of the pumps, dynamograms, sensor technologies, and diagnostic methods.Our analysis will provide insights into modern techniques and approaches for enhancing the performance and reliability of oil production systems, targeting cost reduction and increased operational efficiency.
    deep well pump, dynamograms, machine learning, diagnostics of operating coditions,Random Forest, XGBoost
    ... of the fluid column in the annulus, and frictional forces arising: from fluid movement through the tubing. Dynamic loads can result from various factors, among which the most common are: a) Transformation of the motor's rotational motion into vertical translational motion of the sucker rods ...
    ... in the surface equipment g) Slippage effects of the electric motor The resultant time function of the smooth rod load is a combination of many factors, some of which are measurable and belong to the class of deterministic (static) loads, 11 while the majority of dynamic loads are stochastic ...
    ... recorded at the surface using a mechanical-hydraulic dynamometer, a surface dynamogram is obtained. The shape of the surface dynamogram depends on all factors 15 influencing the occurrence of dynamic loads, making it often challenging to visually interpret and identify potential issues in the deep ...

  • Towards Sustainable Management of Transboundary Hungarian-Serbian Aquifer

    Zoran Stevanović, Peter Kozák, Milojko Lazić, Janos Szanyi, Dušan Polomčić, Balazs Kovács, Jozsef Török, Saša Milanović, Bojan Hajdin, Petar Papić (2011)
    ... annual air temperalure of 11'C and rainfall of 575 mm per year. The whole hydrographic network belongs to the river basin of the Biack Sea. It is assumed that about 99% of surface waters are water flows of a transitory nature, while only about 17o comes from rainfall within the region. The major rivers ...
    ... The well capacity ranges from 5 to 251s i, depending on geology, applied drilling techniclues, construction materials, well development and other factors 17]. In the past, many wel1s were over-pumped and forced beyond their optimal capacities, which caused them to deteriorate c1uic1dy. Therefore, many ...

  • Navigacija budućnosti: poslovni rizici i prilike u rudarskoj industriji

    Petar Marković, Dejan Stevanović, Mirjana Banković, Vuk Lazić (2024)
    Sektor rudarstva i metalurgije se globalno suočava sa brzo evoluirajućim okruženjem u 2024. godini, koje karakteriše jedinstvena međusobna zavisnost rizika i prilika. Sektor je u središtu globalne energetske tranzicije, uz rastuću potražnju za kritičnim mineralnim sirovinama poput litijuma, nikla i bakra, koji su od suštinskog značaja za tehnologije obnovljive energije i električna vozila. Međutim, ova sve veća odgovornost donosi brojne izazove, uključujući pojačanu pažnju na ekološke, društvene i upravljačke (ESG) faktore, fizičke i tranzicione rizike uzrokovane klimatskim promenama, i ...

  • Polyhedral characteristics of the cosalite-type crystal structures

    Sabina Kovač, Predrag Dabić, Aleksandar Kremenović, Aleksandar Pačevski, Ljiljana Karanović, Marko V. Rodić, Martina Tribus (2019)
    kristalna struktura, kozalit, poliedarske karakteristike

  • Optimising in electrical energy consumption in mining plants

    Snežana Aleksandrović, Vesna Damnjanović, Ilija Jeftenić (2018)

  • Why classical sequence stratigraphy doesn't work in Pannonian basin?

    Dejan Radivojević (2018)
    basen iza ostrvskog luka, detačment, miocen, Panonski basen, riftogeneza, sekvenciona stratigrafija
    ... y and structural evolution, Geologica Carpatica, 67, 6, 525–542.  ter  Borgh, M.,  Radivojević, D., Matenco,  L.,  2015.  Constraining  forcing  factors  and  relative  sea‐level  fluctuations in semi‐enclosed basins: The Late Neogene demise of Lake Pannon, Basin Research  doi: 10.1111/bre.12094.   ...

  • The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers

    Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović (2019)
    One of the most important prerequisites for the successful operation of the open-cast lignite mine is to carry out all the auxiliary works timely with the necessary quality. The most important and most commonly used auxiliary machines are bulldozers. Engaging time of bulldozers use is in direct relation with the coefficients of the time and capacity utilization of the continuous system for the excavation of coal and tailings, which indicates their importance. More than 100 bulldozers have been hired ...
    open-cast coal mine, auxiliary works, bulldozers, optimization, availability
    ... technical capabilities. Such ап analysis would enable better forecasting ог their operation. Dozer's life оп the open-cast mines is related to numerous factors, where most important ones аге machine's quality, ореганпр conditions, maintenance quality, operating quality, апа others. Empirical data shows ...

  • Improving Document Retrieval in Large Domain Specific Textual Databases Using Lexical Resources

    Ranka Stanković, Cvetana Krstev, Ivan Obradović, Olivera Kitanović (2017)
    Large collections of textual documents represent an example of big data that requires the solution of three basic problems: the representation of documents, the representation of information needs and the matching of the two representations. This paper outlines the introduction of document indexing as a possible solution to document representation. Documents within a large textual database developed for geological projects in the Republic of Serbia for many years were indexed using methods developed within digital humanities: bag-of-words and named ...
    ... software solution, but rather registered in a database and accessible to users. Table 1. A matrix of key words, fields that are searched, and weight factors for query “lignite coal in Tamnava region”. DocId Abstract Appendices Keywords Municipality Title Total 577 4 8 12 24 lignit 8 8 Tamnava 8 4 12 ...
    ... Databases 7 Query processing on the server side expands the faceted query by creating a matrix of key words, fields that are searched, and weight factors (see Table 1), and then translates this query into SQL (Structured Query Language) form. The query generated in such a way searches the text of the ...
    ... database that correspond to the selected search facets. Ranking of retrieved documents is performed in descending order of the total sum of weight factors for all fields in which the keywords from the faceted search were found. The keyword matrix and the ranking of retrieved documents for the faceted ...

  • Multi-Criteria Approach for Selecting Optimal Dozer Type in Open-Cast Coal Mining

    Ivan Janković, Stevan Đenadić , Dragan Ignjatović , Predrag Jovančić , Tomislav Šubaranović, Ivica Ristović (2019)
    Analitički hijererhijski proces (AHP), dozeri, eksploatacija uglja, površinski kopovi
    ... advantage of this method is ease of use, followed by the quality of output data. It relies on the theory of the relative weight determination of the factors in decision-making. It is based on the measurements made by comparing pairs of data, and it depends on the evaluation of experts for defining priority ...
    ... shows the end collective results. 5. Conclusions The choice of the optimal dozer type and manufacturer is a challenge influenced by multiple factors and criteria. It is necessary to consider all the parameters which influence dozer work in specific conditions when selecting new equipment. The ...
    ... line shows the end collective results. 5. Conclusions The choice of the optimal dozer type and manufacturer is a challenge influenced by multiple factors and criteria. It is necessary to consider all the parameters which influence dozer work in specific conditions when selecting new equipment. The advantages ...