Претрага
157 items
-
Characterization of bituminite in Kimmeridge Clay by confocal laser scanning and atomic force microscopy
Paul C. Hackley, Jolanta Kus, João Graciano Mendonça Filho, Andrew D. Czaja, Angeles G. Borrego, Dragana Životić, Brett J. Valentine, Javin J. Hatcheries (2022)This work investigates bituminite (amorphous sedimentary organic matter) in Upper Jurassic Kimmeridge Clay source rock via confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM). These petrographic tools were used to provide better understanding of the nature of bituminite, which has been historically difficult to identify and differentiate from similar organic matter types in source rocks. As part of an International Committee for Coal and Organic Petrology (ICCP) working group, an immature (0.42% vitrinite reflectance), organic-rich (44.1 wt% ...Битуминит, Kонфокална ласерска скенирајућа микроскопија, Mикроскопија атомских сила, Органска петрологија, Термичка зрелостPaul C. Hackley, Jolanta Kus, João Graciano Mendonça Filho, Andrew D. Czaja, Angeles G. Borrego, Dragana Životić, Brett J. Valentine, Javin J. Hatcheries. "Characterization of bituminite in Kimmeridge Clay by confocal laser scanning and atomic force microscopy" in International Journal of Coal Geology, Elsevier BV (2022). https://doi.org/10.1016/j.coal.2022.103927
-
Natural two-dimensional pyrophyllite: Nanoscale lubricant, electrical insulator and easily-machinable material
Borislav Vasić, Radoš Gajić, Ivana Milošević, Žarko Medić, Marina Blagojev, Marko Opačić, Aleksandar Kremenović, Dejan Lazić (2022)Pyrophyllite, with the chemical formula Al2Si4O10(OH)2, is a naturally occurring and abundant van der Waals mineral belonging to the group of phyllosilicates. It is very soft, layered crystal used for sculpting and an excellent electrical and thermal insulator aimed for the operation at high pressure and temperature. Here, for the first time, two-dimensional (2D) pyrophyllite obtained by both mechanical and liquid phase exfoliation is presented and investigated at the nanoscale. The layered structure provides low friction coefficient of around ...Atomic force microscopy, Insulating properties, Nanofriction and wear, Natural two dimensional materials, Phyllosilicates, PyrophylliteBorislav Vasić, Radoš Gajić, Ivana Milošević, Žarko Medić, Marina Blagojev, Marko Opačić, Aleksandar Kremenović, Dejan Lazić. "Natural two-dimensional pyrophyllite: Nanoscale lubricant, electrical insulator and easily-machinable material" in Applied Surface Science, Elsevier BV (2022). https://doi.org/10.1016/j.apsusc.2022.155114
-
Curcumin nanonization using an alternative small-scale production unit: selection of proper stabilizer applying basic physicochemical consideration and biological activity assessment of nanocrystals
Ines Nikolić, Jelena Antić-Stanković, Dragana Božić, Danijela Ranđelović, Bojan Marković, Dominique Jasmin Lunter, Aleksandar Kremenović, Miroslav Savić, Snežana Savić (2020)As the number of poorly soluble drugs is increasing, nanocrystals have become very interesting due to wide range of application possibilities. Curcumin was used as a model active ingredient in this work. Even though it has many proven positive effects, due to its physicochemical issues, its possibilities have not been fully exploited. The goal of this work was to select optimal conditions for a top-down method for curcumin nanosuspension production, and to perform their comprehensive characterization applying complementary methodologies: ...Ines Nikolić, Jelena Antić-Stanković, Dragana Božić, Danijela Ranđelović, Bojan Marković, Dominique Jasmin Lunter, Aleksandar Kremenović, Miroslav Savić, Snežana Savić. "Curcumin nanonization using an alternative small-scale production unit: selection of proper stabilizer applying basic physicochemical consideration and biological activity assessment of nanocrystals" in Review on advanced materials science, Walter de Gruyter GmbH (2020). https://doi.org/10.1515/rams-2020-0043
-
Application of Lignite Combustion Waste Slag Generated in Heating Plants as a Partial Replacement for Cement. Part II: Physical–Mechanical and Physical–Chemical Characterization of Mortar and Concrete
Milan Kragović, Nenad Ristić , Jelena Gulicovski, Andrijana Nedeljković, Snežana Pašalić, Ivica Ristović, Marija Stojmenović (2021)sagorevanje lignita, otpadna šljaka, zamena cementa, proizvodnja maltera i betona, fizičko-mehanička i fizičko-hemijska karakterizacija... pull-off tester. The pull-off failure force was registered, as well as the location where the failure occurred. The adhesive strength of mortar to a concrete substrate was calculated according to the following formula: fu = F A (4) where F was the failure force at pull-off and A was the surface area ...
... overlapping spectral bands or what may be an indication that new phases are not formed. 3.4. Scanning Electron Microscopy (SEM) of the Mortar Samples Results of the scanning electron microscopy (SEM) of the hardened mortar samples (P20-M) are given at Figure 9. Minerals 2021, 11, 925 13 of 16 −1 ...
... 40 mm × 160 mm. The tests were conducted on the hydraulic press UTCM-6710 (Utest, Ankara, Turkey) with a measuring range of 0–10 kN of the flexural force and accuracy class 0.5%. Compressive strength was determined according to standards EN 196-1 and EN 1015-11 and was tested on the halves of the prisms ...Milan Kragović, Nenad Ristić , Jelena Gulicovski, Andrijana Nedeljković, Snežana Pašalić, Ivica Ristović, Marija Stojmenović . "Application of Lignite Combustion Waste Slag Generated in Heating Plants as a Partial Replacement for Cement. Part II: Physical–Mechanical and Physical–Chemical Characterization of Mortar and Concrete" in Minerals, MDPI (2021). https://doi.org/10.3390/min11090925
-
Novel cerium and praseodymium doped phosphate tungsten bronzes: Synthesis, characterization, the behavior in the Briggs-Rauscher reaction and photoluminescence properties
Tijana Maksimović, Pavle Tančić, Jelena Maksimović, Dimitrije Mara, Marija Ilić, Rik Van Deun, Ljubinka Joksović, Maja Pagnacco (2023)Due to the interesting and potentially useful properties, phosphate tungsten bronzes are constantly being studied and attract a lot of attention. In the present work, two different metallic elements, belonging to the group of rare-earth metals, cerium and praseodymium, were used as a dopants for phosphate tungsten bronzes. Novel cerium and praseodymium doped phosphate tungsten bronzes were successfully synthesized and further characterized by thermal analyses, Fourier-transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy with energy-dispersive X-ray spectrometer and ...Electrical and Electronic Engineering, Atomic and Molecular Physics and Optics, Electronic, Optical and Magnetic Materials, Inorganic Chemistry, Organic Chemistry, Physical and Theoretical Chemistry, SpectroscopyTijana Maksimović, Pavle Tančić, Jelena Maksimović, Dimitrije Mara, Marija Ilić, Rik Van Deun, Ljubinka Joksović, Maja Pagnacco. "Novel cerium and praseodymium doped phosphate tungsten bronzes: Synthesis, characterization, the behavior in the Briggs-Rauscher reaction and photoluminescence properties" in Optical Materials, Elsevier BV (2023). https://doi.org/10.1016/j.optmat.2023.114125
-
Overcoming the Low Oral Bioavailability of Deuterated Pyrazoloquinolinone Ligand DK-I-60-3 by Nanonization: A Knowledge-Based Approach
Jelena R. Mitrović , Branka Divović-Matović, Daniel E. Knutson, Jelena B. Ðoković, Aleksandar Kremenović, Vladimir D. Dobričić, Danijela V. Randjelović, Ivana Pantelić, James M. Cook, Miroslav M. Savić, Snežana D. Savić (2021)Poor water solubility of new chemical entities is considered as one of the main obstacles in drug development, as it usually leads to low bioavailability after administration. To overcome these problems, the selection of the appropriate formulation technology needs to be based on the physicochemical properties of the drug and introduced in the early stages of drug research. One example of the new potential drug substance with poor solubility is DK-I-60-3, deuterated pyrazoloquinolinone, designed for the treatment of various neuropsychiatric ...... U.K.) after dilution in ultrapure water (conductivity 50 µS/cm) 1:100 (v/v). Atomic Force Microscopy (AFM) Morphology and size of the nanocrystals in developed dispersions were analyzed using an NTEGRA Prima Atomic Force Microscope (NT-MDT, Moscow, Russia). The sample preparation included dilution ...
... 0.238 ± 0.004 0.220 ± 0.005 −36.7 ± 1.1 −40.7 ± 1.1 F8 175.4 ± 4.1 175.8 ± 5.2 0.208 ± 0.021 0.257 ± 0.081 −41.8 ± 2.6 −38.3 ± 1.0 3.2.4. Atomic Force Microscopy (AFM) Although a very powerful method for particle size determination, dynamic light scat- tering (DLS) is limited to spherical objects, as ...
... non-spherical particles are expected, visualization by some microscopic technique is significant for the right interpretation of the results. Atomic force microscopy is considered a valuable tool for nanocrystal characterization as it can provide information about the shape and structure of the particles ...Jelena R. Mitrović , Branka Divović-Matović, Daniel E. Knutson, Jelena B. Ðoković, Aleksandar Kremenović, Vladimir D. Dobričić, Danijela V. Randjelović, Ivana Pantelić, James M. Cook, Miroslav M. Savić, Snežana D. Savić. "Overcoming the Low Oral Bioavailability of Deuterated Pyrazoloquinolinone Ligand DK-I-60-3 by Nanonization: A Knowledge-Based Approach" in Pharmaceutics, MDPI, Basel, Switzerland (2021). https://doi.org/10.3390/pharmaceutics13081188
-
Mineral resources in the Republic of Serbia: A Driving Force for Economic Development – Pro et Contra
Jelenković Rade (2014)Jelenković Rade. "Mineral resources in the Republic of Serbia: A Driving Force for Economic Development – Pro et Contra" in 4nd International Conference Mineral resources in the Republic of Serbia: A Driving Force for Economic Development, Beograd:TGI Executive Meetings (2014)
-
Cutting Resistance Laboratory Testing Methodology for Underwater Coal Mining
... testing cutting force. This test method suggests that the rock sample is installed into a suitable hydraulic press, used to apply the vertical force to the wedge. The vertical force constantly increases until the sample splits. During the tests and determining the value of the force which led to the ...
... digging force must be available at the digging wheel [2]. Digging conditions strongly influence the excavator productivity and performance [3]. The digging force, F, has three components (tangential, lateral, and forward thrust) [4–7], perpendicular to each other (Figure 1). The tangential force is by ...
... digging force must be available at the digging wheel [2]. Digging conditions strongly influence the excavator productivity and performance [3]. The digging force, F, has three components (tangential, lateral, and forward thrust) [4-7], perpendicular to each other (Figure 1). The tangential force is by ...Vladimir Čebašek, Veljko Rupar, Stevan Đenadić, Filip Miletić. "Cutting Resistance Laboratory Testing Methodology for Underwater Coal Mining" in Minerals, MDPI AG (2021). https://doi.org/10.3390/min11060564
-
The synergy of polarized transmitted light microscopy and scanning electron microscopy in mineralogical-petrological investigations of cultural heritage objects
Kristina Šarić, Vesna Matović, Suazana Erić. "The synergy of polarized transmitted light microscopy and scanning electron microscopy in mineralogical-petrological investigations of cultural heritage objects" in 14th Multinational Congress on Microscopy, Belgrade, Serbia, September 15-20, 2019, University of Belgrade, Institute for Biological Research “Siniša Stanković”, National Institute of Republic of Serbia, Serbian Society for Microscopy, Serbia (2019)
-
Assesment of the digging force for underwater coal mining
Чебашек Владимир, Гојковић Небојша, Бошковић Звонимир, Димитријевић Бојан, Рупар Вељко. "Assesment of the digging force for underwater coal mining" in 7th Balkan Mining Congress BALKANMINE 2017 no. Book of proceedings I, Prijedor, Republik of Srpska:University of Banja Luka Faculty of Mining Prijedor, Mining Institute Belgrade Ltd. (2017): 279-287. https://doi.org/10.7251/BMC170701279C
-
Poboljšanje geotehničkih uslova izgradnje nasipa upotrebom geosintetika
Anastasija Radovanović (2024)Za potrebe izrade rada na Master akademskim studijama ,,Rudarsko-geološkog fakulteta,,, studijskog programa Geotehnika, pod mentorstvom prof. dr Gordane Hadži-Niković , izvršena je detaljna analiza stabilnosti kosina nasipa na Vranjskoj petlji. Geotehnička istraţivanja i ispitivanja terena izveo je “Zavod za geotehniku iz Instituta za puteve a.d. Beograd”, a investitor je “Javno preduzeće, Putevi Srbije”.Metodološki pristup koji je korišćen za analizu stabilnosti kosina nasipa jeste kabinetsko istraživanje dostavljene dokumentacije i geostatički proračuni analize stabilnosti kosina nasipa, korišćenjem savremenih softverskih alata.Krajnji zaključak izvedenih istraţivanja je da ...... Moment=15290.5 kN-m _ Driving Moment=9014.96 kN-m ii Resisting Horizontal Force=617.664 kN i Driving Horizontal Force=364.161 kN D; O D_– ~ D_– i D; O _ Shear J Material Force Strip Tenslie ] Support Name | Color Force Application Dependent Adhesion s:lr:;getlh Orientation Anchorage Coverage ...
... Moment=15820.2 kN-m | Driving Moment=8960.47 kN-m - Resisting Horizontal Force=538.133 kN — Driving Horizontal Force=304.796 kN -M ~ o_| b -M 551 | Shear i a Material i Friction Force Tenslie | Support Name |Color Force Application Dependent Adhesion Angle S:\:z:ižh Orientation Anchorage Coverage ...
... 47.2 kN-m Driving Moment=9327.36 kN-m Resisting Horizontal Force=741.396 kN Driving Horizontal Force=366.913 kN Material Friction | SPPŠ9T | - Force Strength | 2 iohezati Dependent Angle Model Orientation Support Name |Color Force Application AAnchorage Coverage | Strength Bisector of ...Anastasija Radovanović. Poboljšanje geotehničkih uslova izgradnje nasipa upotrebom geosintetika, 2024
-
Cultural Heritage and Protection of Hand-Wheeled Pottery Manufacture in Western Serbia: Characteristics of Zlakusa Pottery Based on Sem-Eds and Optical Microscopy
... . The main goal of this work was to show characteristics of the pottery manufacture based on mineralogy [scanning electron microscopy (SEM-EDS) and optical microscopy] and applying the obtained knowledge in the preservation of this type of cultural heritage in Serbia. Results and discussion ...
... Cultural Heritage and Protection of Hand-Wheeled Pottery Manufacture in Western Serbia: Characteristics of Zlakusa Pottery Based on Sem-Eds and Optical Microscopy Milošević Maja, Zdravković Alena, Đordjević Biljana, Jelić Ivana Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду ...
... Cultural Heritage and Protection of Hand-Wheeled Pottery Manufacture in Western Serbia: Characteristics of Zlakusa Pottery Based on Sem-Eds and Optical Microscopy | Milošević Maja, Zdravković Alena, Đordjević Biljana, Jelić Ivana | 8th Mineral Sciences in the Carpathians Conference, Acta Mineralogica-Petrographica ...Milošević Maja, Zdravković Alena, Đordjević Biljana, Jelić Ivana. "Cultural Heritage and Protection of Hand-Wheeled Pottery Manufacture in Western Serbia: Characteristics of Zlakusa Pottery Based on Sem-Eds and Optical Microscopy" in 8th Mineral Sciences in the Carpathians Conference, Acta Mineralogica-Petrographica, Miskolc, Hungary, Department of Mineralogy, Geochemistry and Petrology, University of Szeged, Szeged, Hungary (2021)
-
Scanning Electron Microscopy Coupled with Energy Dispersive Spectrometric Analysis Reveals for the First Time Weddellite and Sylvite Crystals on the Surface of Involucral Bracts and Petals of two Xeranthemum L. (Compositae) Species
Milan Gavrilović, Suzana Erić, Petar Marin, Núria Garcia-Jacas, Alfonso Susanna, Pedja Janaćković (2017)Milan Gavrilović, Suzana Erić, Petar Marin, Núria Garcia-Jacas, Alfonso Susanna, Pedja Janaćković. "Scanning Electron Microscopy Coupled with Energy Dispersive Spectrometric Analysis Reveals for the First Time Weddellite and Sylvite Crystals on the Surface of Involucral Bracts and Petals of two Xeranthemum L. (Compositae) Species" in Microscopy and Microanalysis 23 no. 3, :Cambridge University Press (2017): 679-686
-
Ore Microscopy Analysis Methods In Mineral Concentration Processis.
Tomanec Rudolf, Lazić Predrag, Gaćina R, Bajić S.. "Ore Microscopy Analysis Methods In Mineral Concentration Processis." in Proceedings of 5Th JUBILEE BALKANMINE CONGRESS AND COMERCIAL EXHIBITION, Ohrid: (2013): 779-785
-
Microstructural, mineralogical and petrographical characteristics of the Medieval ceramics from the Studenica Monastery (UNESCO world heritage site): Implications on the pottery technology and provenance of the raw material.
Šarić Kristina,Bikić Vesna, Erić Suzana. "Microstructural, mineralogical and petrographical characteristics of the Medieval ceramics from the Studenica Monastery (UNESCO world heritage site): Implications on the pottery technology and provenance of the raw material." in Microscopy and Microanalysis 6 no. 24, :Microscopy Society of America (2018): 744-761. https://doi.org/doi:10.1017/S1431927618015349
-
Microstructural, mineralogical and petrographical characteristics of the Medieval ceramics from the Studenica Monastery (UNESCO world heritage site): Implications on the pottery technology and provenance of the raw material.
Šarić Kristina,Bikić Vesna, Erić Suzana. "Microstructural, mineralogical and petrographical characteristics of the Medieval ceramics from the Studenica Monastery (UNESCO world heritage site): Implications on the pottery technology and provenance of the raw material." in Microscopy and Microanalysis 6 no. 24, :Microscopy Society of America (2018): 744-761. https://doi.org/doi:10.1017/S1431927618015349
-
Microscopical characterization of carbon materials derived from coal and petroleum and their interaction phenomena in making steel electrodes, anodes and cathode blocks for the microscopy of carbon materials working group of the ICCP
Predeanu G., Panaitescu C., Bălănescu M., Bieg G., Gómez Borrego A., Diez M.A., Hackley P., Kwiecińska B., Marques M., Mastalerz M., Misz-Kennan M., Pusz S., Suárez Ruiz I., Rodrigues S., Singh A.K., Varma A.K., Zdravkov A., Životić Dragana (2015)Predeanu G., Panaitescu C., Bălănescu M., Bieg G., Gómez Borrego A., Diez M.A., Hackley P., Kwiecińska B., Marques M., Mastalerz M., Misz-Kennan M., Pusz S., Suárez Ruiz I., Rodrigues S., Singh A.K., Varma A.K., Zdravkov A., Životić Dragana. "Microscopical characterization of carbon materials derived from coal and petroleum and their interaction phenomena in making steel electrodes, anodes and cathode blocks for the microscopy of carbon materials working group of the ICCP" in International Journal of Coal Geology 139, Amsterdam, Netherlands:Elsevier BV (2015): 63-79. https://doi.org/10.1016/j.coal.2014.07.011
-
Freeze-dried nanocrystal dispersion of novel deuterated pyrazoloquinolinone ligand (DK-I-56-1): Process parameters and lyoprotectant selection through the stability study
Jelena R. Mitrović, Maja Bjelošević Žiberna, Aleksandar Vukadinović, Daniel E. Knutson, Dishary Sharmin, Aleksandar Kremenović, Pegi Ahlin Grabnar, Odon Planinšek, Dominique Lunter, James M. Cook, Miroslav M. Savić, Snežana D. Savić (2023)Recently, nanocrystal dispersions have been considered as a promising formulation strategy to improve the bioavailability of the deuterated pyrazoloquinolinone ligand DK-I-56-1 (7‑methoxy-2-(4‑methoxy-d3-phenyl)-2,5-dihydro-3H-pyrazolo[4,3-c]quinolin-3-one). In the current study, the freeze-drying process (formulation and process parameters) was investigated to improve the storage stability of the previously developed formulation. Different combinations of lyoprotectant (sucrose or trehalose) and bulking agent (mannitol) were varied while formulations were freeze-dried under two conditions (primary drying at -10 or -45 °C). The obtained lyophilizates were characterized in terms ...... analysis (by differential scanning calorimetry and X-ray powder diffraction) and visualization of morphology (by scanning electron microscopy and polarized light microscopy). Finally, the extent of interactions between the nanocrystal stabilizers and the lyoprotectant was evaluated by Fourier transform ...
... analyzed using PDXL2 (v. 2.8.30) integrated X-ray powder diffraction software. 2.7. Scanning electron microscopy (SEM) The morphology of the lyophilzates was analyzed by scanning elec- tron microscopy (SEM). A small amount of the sample was placed on a conductive double-sided adhesive tape and examined ...
... sample is indicated in the caption as well as in the bar size. 2.8. Polarized light microscopy (PLM) Physical state and morphology of the freeze-dried samples were also analyzed using polarized light microscopy (PLM). It was performed using Carl Zeiss ApoTome Imager Z1 microscope (Zeiss, Germany) ...Jelena R. Mitrović, Maja Bjelošević Žiberna, Aleksandar Vukadinović, Daniel E. Knutson, Dishary Sharmin, Aleksandar Kremenović, Pegi Ahlin Grabnar, Odon Planinšek, Dominique Lunter, James M. Cook, Miroslav M. Savić, Snežana D. Savić. "Freeze-dried nanocrystal dispersion of novel deuterated pyrazoloquinolinone ligand (DK-I-56-1): Process parameters and lyoprotectant selection through the stability study" in European Journal of Pharmaceutical Sciences, Elsevier BV (2023). https://doi.org/10.1016/j.ejps.2023.106557
-
Crystallography and Surface Oxidation of Stoichiometric Arsenopyrite from Šumadija-Kopaonik Pb-Zn/Polymetallic Ore District (Serbia)
Ivana Jelić, Aleksandar Pačevski, Aleksandar Kremenović, Aleš Šoster, Andreja Šestan, Janez Zavašnik (2023)The behaviour and stability of arsenopyrite largely depend on its crystal structure, but studies of crystallography and structural defects are scarce. For clarification, we investigated a series of natural arsenopyrite crystals from the polymetallic Pb-Zn-(±Cu,Ag,Au,Sb,Bi,W) Šumadija-Kopaonik ore district (Serbia) by powder X-ray diffraction (XRPD). Among them, samples from the Drenjak gold mineralisation showed near-stoichiometric FeAsS composition and were further investigated by conventional and high-resolution transmission electron microscopy methods. TEM revealed abundant planar crystallographic defects and epitaxial surface oxide layer ...Inorganic Chemistry, Condensed Matter Physics,General Materials Science, General Chemical Engineering, crystal structure, FeAsS, oxidation, TEM, XRPD... (Rudnik). Due to their almost ideal stoichiom- etry, arsenopyrite samples from Drenjak were further analysed by transmission electron microscopy, Which allows atomic-scale imaging and electron diffraction obtained from the same location within the sample. Using TEM, we explored the arsenopyrite local ...
... Geology, Faculty of Natural Sciences and Engineering, University of Ljubljana, Aškerčeva Cesta 12, 1000 Ljubljana, Slovenia Centre for Electron Microscopy, Jožef Stefan Institute, Jamova Cesta 39, 1000 Ljubljana, Slovenia Gaseous Electronics Department, Jožef Stefan Institute, Jamova Cesta 39, 1000 ...
... mineralisation showed near-stoichiometric FeAsS composition and were further investigated by conventional and high-resolution transmission electron microscopy methods. TEM revealed abundant planar crystallographic defects and epitaxial surface oxide layer formation upon air exposure. Our findings present ...Ivana Jelić, Aleksandar Pačevski, Aleksandar Kremenović, Aleš Šoster, Andreja Šestan, Janez Zavašnik. "Crystallography and Surface Oxidation of Stoichiometric Arsenopyrite from Šumadija-Kopaonik Pb-Zn/Polymetallic Ore District (Serbia)" in Crystals, MDPI AG (2023). https://doi.org/10.3390/cryst13020278
-
Agates of the Lece Volcanic Complex (Serbia): Mineralogical and Geochemical Characteristics
Agate veins and nodules occur in the Lece Volcanic Complex (Oligocene-Miocene) situated in the south of Serbia and occupying an area of 700 km2. This volcanic complex is composed predominantly of andesites, with sporadic occurrences of andesite-basalts, dacites and latites, and features agate formations that have been very little investigated. This study focuses on five selected agate occurrences within the Lece Volcanic Complex, employing optical microscopy, scanning electron microscopy (SEM), X-ray powder diffraction analysis, inductively coupled plasma mass spectrometry ...Zoran Miladinović, Vladimir Simić, Nenad Nikolić, Nataša Jović Orsini, Milena Rosić. "Agates of the Lece Volcanic Complex (Serbia): Mineralogical and Geochemical Characteristics" in Minerals, MDPI AG (2024). https://doi.org/10.3390/min14050511