Претрага
2240 items
-
Development of the Cost-Based Model for Monitoring the Lifetime of the Earth Moving Machines
This paper presents the model for the identification of reference points on the lifetime curve of engineering systems. This curve commonly represents the increase and decline of failure in relation to time. A direct correlation between failure rate and costs is assumed in this paper, therefore, statistical and empirical analysis of costs provided reference points. This approach is used for positioning stages of the engineering system’s lifetime with a minimal number of failures and costs, regardless of whether these ...Electrical and Electronic Engineering,Industrial and Manufacturing Engineering, Control and Optimization, Mechanical Engineering, Computer Science (miscellaneous), Control and Systems EngineeringUgljesa Bugarić, Milos Tanasijević, Stevan Djenadić, Dragan Ignjatović, Ivan Janković. "Development of the Cost-Based Model for Monitoring the Lifetime of the Earth Moving Machines" in Machines, MDPI AG (2022). https://doi.org/10.3390/machines10110995 М22
-
Optimizacija i planiranje površinskih kopova stohastičkim modelima
Dejan R. Stevanović (2015-05-29)Savremeno rudarstvo izloženo je stalnom trendu pogoršanja uslova poslovanja.Mogućnost ostvarenja ekonomskih i drugih ciljeva rudarskog projektakompromitovana je stalnim pogoršanjem kvaliteta ležišta na kojima se vršieksploatacija, kao i značajnoj dozi neizvesnosti povezane sa geološkim,ekonomskim i tehničkim parametrima proizvodnje. U ovako kompleksnimuslovima poslovanja, matematički modeli sposobni da odgovore značajnimizazovima, odnosno ponude optimalna rešenja kojima se garantuje maksimalnoispunjenje projektovanih ciljeva, nameću se kao neophodnost.Trenutni, konvencionalni pristup optimizaciji i planiranju površinskih kopovazasniva se na algoritmima, razvijenim sredinom prošlog veka čije je opšteobeležje deterministički ...površinski kop, planiranje, optimizacija, stohastički modeli, kontrola kvaliteta uglja, neizvesnost.Dejan R. Stevanović. "Optimizacija i planiranje površinskih kopova stohastičkim modelima" in Универзитет у Београду, Универзитет у Београду, Рударско-геолошки факултет (2015-05-29)
-
Optimization and Analysis of Drilling and Blasting Parameters Using O-Pitblast Software
The development of modern technologies has enabled the application of specialized softwares in the field of mining through various segments and processes, including in works related to drilling and blasting. The application of specialized software for drilling and blasting with the use of modern technologies such as photogrammetry enabled more accurate data from the field for later processing. By processing data and creating a 3D model of the terrain for drilling and blasting works, it can obtain precise data, ...Stefan Milanović, Nikola Simić, Lazar Kričak, Milanka Negovanović, Nikola Đokić. "Optimization and Analysis of Drilling and Blasting Parameters Using O-Pitblast Software" in Podzemni radovi, Beograd : Rudarsko-geološki fakultet (2024) М51
-
Definition of criteria and alternatives for choosing the optimal mining method deposits when applying multi – criteria optimization
Sanja Bajić, Dragoljub Bajić, Branko Gluščević, Radmila Gaćina, Josip Išek. "Definition of criteria and alternatives for choosing the optimal mining method deposits when applying multi – criteria optimization" in Underground mining engineering, University of Belgrade, Faculty of Mining and Geology (2024) М53
-
Preliminary management and optimization of a gas reservoir in central Serbia
Karović-Maričić Vesna, Danilović Dušan (2010)Karović-Maričić Vesna, Danilović Dušan. "Preliminary management and optimization of a gas reservoir in central Serbia" in Journal of Petroleum Science and Engineering no. 70, 1-2, London-Amsterdam -New York:Elsevier (2010): 107-113 M21
-
Gas-lift wells optimization at the oil field "K"
Dušan Danilović, Marija Ilić, Miroslav Crnogorac, Lola Tomić. "Gas-lift wells optimization at the oil field "K"" in Podzemni radovi, University of Belgrade - Faculty of Mining and Geology (2022). https://doi.org/10.5937/podrad2241031D М51
-
Eigensensitivity and structural optimization with accent on the repeated frequencies
Sensitivity analysis is the study of changes in system response with respect to design parameters. It is being used in a variety of engineering disciplines ranging from automatic control theory to the analysis of large-scale physiological systems. Some of areas where sensitivity analysis has been applied include: development of insensitive control systems, use in gradient based mathematical programming methods and approximation of system response to change in a system parameter, assessment of design changes on system performance. Eigensensitivity analysis ...Nataša Trišović, Wei Li, Nikola Mladenović, Olivera Jeremić, Ines Grozdanović, Ana Petrović. "Eigensensitivity and structural optimization with accent on the repeated frequencies" in 6 th International Congress of Serbian Society of Mechanics, Mountain Tara, Serbia, June 19-21, 2017, Srpsko društvo za mehaniku (2017) М33
-
Analysis of Household Coal Consumption in Serbia Based on Grey System Theory and K - means Clustering (Base for Network Optimization)
Gligorić Zoran, Gligorić Miloš, Štrbac-Savić Svetlana. "Analysis of Household Coal Consumption in Serbia Based on Grey System Theory and K - means Clustering (Base for Network Optimization)" in 1st Virtual International Conference on Science, Niš:Research and Development Center ALFATEC (2015): 45-48 M33
-
Soft computing optimization in the coal industry
Benović Tomo, Miljanović Igor, Gajić Grozdana, Maksimović Svetomir, Milutinović Aleksandar. "Soft computing optimization in the coal industry" in 4th Balkan Mining Congress BALKANMINE 1, Ljubljana, Slovenija:Faculty of Natural Sciences and Engineering (2011): 643-647 M33
-
Fuzzy linear model for production optimization of mining systems with multiple entities
Slobodan Vujić, Tomo Benović, Miljanović Igor, Hudej Marjan, Milutinović Aleksandar, Pavlović Petar (2011)Slobodan Vujić, Tomo Benović, Miljanović Igor, Hudej Marjan, Milutinović Aleksandar, Pavlović Petar. "Fuzzy linear model for production optimization of mining systems with multiple entities" in International Journal of Minerals, Metallurgy and Materials 18 no. 6, -:University of Science and Technology Beijing, PR China (2011): 633-637. https://doi.org/10.1007/s12613-011-0488-8 M22
-
An example of groundwater modeling to predict impact of climate change and to support optimization of a new intake
Polomčić Dušan, Stevanović Zoran, Ristić-Vakanjac Vesna, Dokmanović Petar, Milanović Saša. "An example of groundwater modeling to predict impact of climate change and to support optimization of a new intake" in Proceedings of EGU 2012 - Geophysical Research Abstract, Vol 14, 22-27.04. Vienna, Vienna: (2012): 4971-4971 M34
-
The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers
One of the most important prerequisites for the successful operation of the open-cast lignite mine is to carry out all the auxiliary works timely with the necessary quality. The most important and most commonly used auxiliary machines are bulldozers. Engaging time of bulldozers use is in direct relation with the coefficients of the time and capacity utilization of the continuous system for the excavation of coal and tailings, which indicates their importance. More than 100 bulldozers have been hired ...Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović. "The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers" in 7th International Symposium Mining and Environmental Protection, University of Belgrade, Faculty of Mining and Geology, Belgrade, Serbia (2019) М33
-
Waste Dump Design Optimization, Case Study Open Pit Drmno
Stevanović Dejan, Banković Mirjana, Rupar Veljko, Milisavljević Vladimir, Cvjetić Aleksandar, Kržanović Daniel (2017)Stevanović Dejan, Banković Mirjana, Rupar Veljko, Milisavljević Vladimir, Cvjetić Aleksandar, Kržanović Daniel. "Waste Dump Design Optimization, Case Study Open Pit Drmno" in Mining and Environmental Protection, 6th International Symposium, MEP 17, Vrdnik, 21-24 June 2017, Beograd:University of Belgrade, Faculty of Mining and Geology (2017): 282-286 M33
-
Optimization of photoluminescence of Y2O3:Eu and Gd2O3:Eu phosphors synthesized by thermolysis of 2,4-pentanedione complexes
Antić Bratislav, Rogan Jelena, Kremenović Aleksandar, Nikolić Aleksandar S., Vučinić-Vasić Milica, Božanić Dušan K., Goya Gerardo F., Colomban Philippe (2010)Antić Bratislav, Rogan Jelena, Kremenović Aleksandar, Nikolić Aleksandar S., Vučinić-Vasić Milica, Božanić Dušan K., Goya Gerardo F., Colomban Philippe. "Optimization of photoluminescence of Y2O3:Eu and Gd2O3:Eu phosphors synthesized by thermolysis of 2,4-pentanedione complexes" in Nanotechnology 24 no. 21, TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND:IOP Publishing LTD (2010). https://doi.org/10.1088/0957-4484/21/24/245702 M21
-
Mine ventilation system planning using genetic algorithms
The most common problem in contemporary mining practice related to the planning and analysis of ventilation systems is the optimization of partially regulated air distribution in mine ventilation networks. This paper presents a two step optimization procedure for partly regulated air distribution in mine ventilation networks. The first step is the determination of air distribution in all branches using the well known Hardy-Cross method. In the second step the distribution and parameters of air flow regulators with minimum engaged ...coal, lignite, and peat; ventilation systems; coal mining; underground mining; ventilation; mathematical models; design; air flow; optimization; calculation methodsNikola Lilić, Ranka Stanković, Ivan Obradović. "Mine ventilation system planning using genetic algorithms" in 6. international symposium on mine planning and equipment selection, Ostrava (Czech Republic), 3-6 Sep 1997, A.A. Balkema, Rotterdam (Netherlands) (1997) М33
-
Fuzzy optimization in hydrodynamic analysis of groundwater control systems: Case study of the pumping station “Bezdan 1”, Serbia
Dragoljub Bajić, Dušan Polomčić (2014)A groundwater control system was designed to lower the water table and allow the pumping sta-tion “Bezdan 1” to be built. Based on a hydrodynamic analysis that suggested three alternative solutions, mul-ticriteria optimization was applied to select the best alternative. The fuzzy analytic hierarchy process methodwas used, based on triangular fuzzy numbers. An assessment of the various factors that influenced the selec-tion of the best alternative, as well as fuzzy optimization calculations, yielded the “weights” of the alternativesand the ...groundwater lowering, groundwater management scenario, fuzzy analytic hierarchy process,expert knowledge, triangular fuzzy numbers, linguistic variablesDragoljub Bajić, Dušan Polomčić. "Fuzzy optimization in hydrodynamic analysis of groundwater control systems: Case study of the pumping station “Bezdan 1”, Serbia" in Geološki anali Balkanskoga poluostrva, Belgrade : University of Belgrade - Faculty of mining and geology (2014). https://doi.org/10.2298/GABP1475103B M24
-
Cutting Parameters Optimization for Difficult Excavating Conditions with Bucket Wheel Excavators on Gracanica Opencast Mine in Gacko
Ignjatović Dragan, Pavlović Vladimir, Jovančić Predrag, Bošković Saša. "Cutting Parameters Optimization for Difficult Excavating Conditions with Bucket Wheel Excavators on Gracanica Opencast Mine in Gacko" in 22th Conference – Mine Planing and Equipment Selection 1, Dresden:Technical University Bergakademie Freiberg (2013): 303-310 M33
-
Mitigating hydrate formation in onshore gas wells: A case study on optimization techniques and prevention
Gas wells, particularly those situated onshore, play a vital role in the global energy sector by supplying a significant portion of natural gas. However, operational challenges, notably gas hydrate formation, pose substantial issues, leading to complications such as flowline blockages and unexpected well shutdowns. Gas hydrates, crystalline structures resembling ice, ...Gas Well, Gas Hydrate Formation, Well Modeling, Well Performance Optimization, Choke Position Adjustments, Methanol InjectionMilica Ješić, Bojan Martinović, Stefan Stančić, Miroslav Crnogorac, Dušan Danilović. "Mitigating hydrate formation in onshore gas wells: A case study on optimization techniques and prevention" in Underground Mining Engineering, Beograd : Rudarsko-geološki fakultet (2023) М51
-
Behaviour Diagnostics Of Bucket Wheel Support Structure Using Finite Elements Method: Optimization Of Structures
Predrag Jovančić, Dragan Medenica, Vladimir Milisavljević, Ivica Ristović. "Behaviour Diagnostics Of Bucket Wheel Support Structure Using Finite Elements Method: Optimization Of Structures" in Applied Mechanics and Materials 806, :Scientific.Net , Trans Tech Publications Inc. (2015): 187-196. https://doi.org/10.4028/www.scientific.net/AMM M14
-
Multicriteria Analysis and Optimization of Groundwater Control Systems with Variable Values of Criterion over Predefined Time Points
Milica Stepanović, Dragoljub Bajić, Dušan Polomčić. "Multicriteria Analysis and Optimization of Groundwater Control Systems with Variable Values of Criterion over Predefined Time Points" in Comptes rendus de l'Académie Bulgare des Sciences, "Prof. Marin Drinov" Publishing House of Bulgarian Academy of Sciences (2021). https://doi.org/10.7546/CRABS.2021.08.09 М23