Претрага

Упит dcterms_subject_txt:mine mechanization

67 items

  • The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers

    Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović (2019)
    One of the most important prerequisites for the successful operation of the open-cast lignite mine is to carry out all the auxiliary works timely with the necessary quality. The most important and most commonly used auxiliary machines are bulldozers. Engaging time of bulldozers use is in direct relation with the coefficients of the time and capacity utilization of the continuous system for the excavation of coal and tailings, which indicates their importance. More than 100 bulldozers have been hired ...
    open-cast coal mine, auxiliary works, bulldozers, optimization, availability
    ... dozers јог 10 years of орегапоп 2. LIFE СУСТЕ ОЕ DOZER Life сусје ог mechanization refers to 5 дигаНоп, i.e. it starts just after the designing stage апа production stage. Непсе, it is the period during which the mechanization is in functional condition, meaning it is used [2, 5]. Life cycle of ...
    ... research in the field of technological development for the period 2011-2019. REFERENCES 1. Optimizing organization, resources and costs of auxiliary mechanization to increase utilization of overburden and coal systems on open pit mines of EPS (in Serbian) (2018) Study, Faculty of Mining and Geology, Belgrade ...
    ... of Serbia. |Тће је cycle of these machihes is 5–10 years, 50 И is hecessary 10 replace тће complete equipmeht several times тт the lifetime ој the mine. The purchasing and the operational costs of auxiliary machihnes are high, and тп the 10141 cost of coal excavating mehtioned cost are fFom about 1 ...

  • Development of an integrated model for open-pit-mine discontinuous haulage system optimization

    Miodrag Čelebić, Dragoljub Bajić, Sanja Bajić, Mirjana Banković, Duško Torbica, Aleksej Milošević , Dejan Stevanović (2024)
    equipment selection, mine mechanization, expert judgment, linguistic variables, MCDM, FAHP

  • GIS/GPS/GPRS based mechanization monitoring dispatch system at open pits

    Vušović Nenad, Denić Miodrag, Čokorilo Vojin, Stojadinović Saša (2011)

  • The Effect of Groundwater on the Mining Mechanization at the Open Pit Mine Coal Drmno in Serbia

    Milanović Radomir, Polomčić Dušan, Dimitrijević Bojan, Pešić Miodrag (2015)

  • Application of the Fuzzy theory in the evaluation of operating parameters of auxiliary mechanization on open-cast coal mine, case study: pipelayers

    Stevan Djenadić, Miloš Tanasijević, Filip Miletić, Predrag Jovančić (2022)
    Achieved operating parameters are the main indicator of the work quality and selection of mining machines. The effectiveness of a coal mine is correlated with the availability of basic and auxiliary machines. The main task of auxiliary machines in lignite mines is to achieve optimal working conditions. From an economic point of view, auxiliary machines generate up to 20% of the lignite mines' total costs. These are the primary reasons for analyzing their current work and making decisions in ...
    upotrebni kvalitet, fazi teorija, rudarske mašine

  • Effectiveness Analysis of Different Bucket-wheel Excavators

    Stevan Đenadić, Predrag Jovančić, Dragan Ignjatović, Miloš Tanasijević, Filip Miletić (2021)
    Coal production in open-pit lignite mines in the Republic of Serbia is performed with continuous work systems. In addition to coal production, the same systems are used for the exploitation of large quantities of overburden. According to the reliability concept, continuous systems are in linear connection. If the failure occurs in one part of the system, that will produce a downtime of the entire system. The initial and most important factor of continuous systems is the bucket-wheel excavator. It ...
    bucket-wheel excavator, open-pit coal mine, mining, multi-criteria decision methods

  • Analiza osnovnih indikatora upotrebnog kvaliteta mašina pomoćne mehanizacije na površinskim kopovima uglja

    Stevan Đenadić, Dragan Ignjatović, Predrag Jovančić, Milena Lekić, Žarko Aleksić, Ivan Janković (2022)
    Izbor optimalnog tipa mašine i adekvatno upravljanje kroz životni vek je kompleksan zadatak. Osnovna pitanja koje se postavljaju prilikom rešavanja ovog zadatka vezana su za stepen zadovoljenja rada mašine i optimalan trenutak zamene iste. U ovom radu je izvršena analiza rada dozera koji su u radu na površinskom kopu lignita RB Kolubara. Analizom je obuhvaćeno 4 različita proizvođača dozera a to su: Caterpillar, Dressta i Shantui i Liebherr. Analiza je izvršena sa aspekta ukupnih troškova koji se stvaraju i ...
    rudarstvo, mehanizacija, upotrebni kvalitet, troškovi, empirijska raspoloživost

  • Determining the Availability of Continuous Systems at Open Pits Applying Fuzzy Logic

    Miljan Gomilanović, Miloš Tanasijević, Saša Stepanović (2022)
    This work presents a model for determining the availability of continuous systems at open pits by applying fuzzy logic and fuzzy inference systems. The applied model was formed by the synthesis of independent partial indicators of availability. The model is based on an expert system for assessing the availability of continuous mining systems. The availability of the system, as a complex state parameter, is decomposed into the partial indicators, reliability, and convenience of maintenance, and the fuzzy compositions, used ...
    системи, континуални систем експоатације, површински коп, рударство, расположивост, фази логика, max–min композиција, min–max композиција

  • The reliability of mechanical gas seal for centrifugal and screw compressors

    Batalović Veselin (2010)

  • Savremeni koncepti održavanja rudarske opreme

    Jovančić Predrag, Ignjatović Dragan, Tanasijević Miloš (2012)

  • Indeksi kontrole održavanja i korišćenja rotornog bagera

    Jovana Mitrović, Predrag Jovančić, Dragan Ignjatović, Stevan Đenadić, Filip Miletić (2023)
    Razvoj površinske eksploatacije se u velikom stepenu zasniva na svestranoj mehanizaciji rudarskih radova. Kako bi se zadovoljili potrebni kapaciteti, neophodna je primena savremene mehanizacije, velikih kapaciteta i pouzdanosti u radu. Naime, sa stepenom povećanja mehanizovanosti radova smanjuje se broj zaposlenih radnika, povećava produktivnost rada, smanjuju troškovi po jedinici proizvoda, a samim tim i povećava ekonomičnost površinske eksploatacije. Predmet istraživanja su rotorni bageri SRs 1200 koji predstavljaju samohodne mašine kontinuiranog dejstva namenjene za otkopavanje jalovine i korisne supstance na površinskim ...
    rudarstvo, rotorni bager, indeksi održavanja, indeksi korišćenja, TOPSIS

  • Energetska bezbednost sektora prirodnog gasa Srbije

    Aleksandar Madžarević, Predrag Jovančić, Miroslav Crnogorac (2023)
    U prve dve decenije 21. veka obezbeđivanje sigurnosti snabdevanja prirodnim gasom domaćeg tržišta bio je jedan od prioriteta razvoja energetike Srbije. Istovremeno, aspekt sigurnog snabdevanja bio je neizostavni deo slagalice stvaranja energetske bezbednosti. Izražena uvozna zavisnost je dominantna karakteristika sektora prirodnog gasa, tačnije, Republika Srbija je snažno zavisna od ruskog gasa, sa više od 80% uvezenih količina gasa, a do pre dve godine snabdevala se isključivo kroz jednu interkonekciju. U radu se razmatra aktuelna situacija u sektoru prirodnog ...
    N-1, IDUPS, energetska bezbednost, sigurnost snabdevanja
    ... Jovančić is a full professor at the Faculty of Mining and Geology, University of Belgrade. Graduated, master's and doctorate in the field of Mechanization in mining, at the FMG, UB, where he was first elected to the position in 2004. He is the author of many papers in internationally recognized ...
    ... Geology, University of Belgrade. He graduated, completed his master's studies, and received his doctorate in the scientific field of oil mining, mechanization, and automation in mining, at the Faculty of Mining and Geology, University of Belgrade, where he was first elected to the position in 2014 ...

  • INVENTS: A Hybrid Mine Ventilation Planning and Design System

    Lilić Nikola, Stanković Ranka, Obradović Ivan (2013)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    hybrid systems, mine ventilation, expert systems
    ... Измењено: 2023-10-14 03:23:37 INVENTS: A Hybrid Mine Ventilation Planning and Design System Lilić Nikola, Stanković Ranka, Obradović Ivan Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] INVENTS: A Hybrid Mine Ventilation Planning and Design System | Lilić Nikola ...
    ... expert knowledge in the mine ventilation field. In this paper we present the design methodology of the hybrid system INVENTS, as well as system structure and user interface. Keywords: hybrid systems, mine ventilation, expert systems 1. Introduction The methodology of mine ventilation planing and ...
    ... and design in contemporary mine theory and practice differs substantially from the traditional approach. The novel approach uses all possibilities offered by computer hardware and software that are at the disposition of mine engineers. Software packages for mine ventilation simulation obtained a key ...

  • Evaluation And Perspectives Of Underground Coal Mines In Serbia

    Vladimir Milisavljević, Milena Lekić, Ivica Ristović, Vojin Čokorilo, Aleksandar Cvjetić (2017)
    ... non-producing mine whose workers are hired as contractors in other mines. These mines are dispersed throughout Serbia, and they are producing various types of coal, as given in Table 1. Table 1. Mines, location, type of coal produced and number of workers (as of March, 2017) Mine Town / Municipality ...
    ... Strmosten pit in REMBAS mine, Lubnica and Štavalj) and for closure of those mines without potential (Tadenje and Jarando pits of Ibarski mines, Senjski rudnik pit of REMBAS, Bogovina and Vrška Čuka). This approach leaves Jasenovac mine and Block IV pit of REMBAS mine in between these two groups ...
    ... C2); • Mining hazards, such as gas, water, dust and potential for gas outbursts and spontaneous combustion (criteria C3); • Potential for mechanization, such as seam inclination, seam thickness, floor and roof conditions, block size, coal clearance facilities and supply facilities (criteria C4); ...

  • Faktori uticaja na izbor optimalnog sistema odbrane od podzemnih voda kod površinskih kopova

    Dragoljub Bajić, Dušan Polomčić (2015)
    hydrodynamic model, multi-criteria optimization, openpit mine

  • Rudničke vode olovo-cinkovih ležišta u rudnom polju „Blagodat“ u jugoistočnoj Srbiji

    Nebojša Atanacković, Veselin Dragišić, Vladimir Živanović, Ivana Cvejić, Saša Stojadinović, Ivana Jocić (2022)
    Rudno polje Blagodat sa više ležišta i pojava olovo-cinkovih ruda nalazi se u krajnjem jugoistočnom delu Srbije, blizu granica sa Bugarskom i Severnom Makedonijom. Eksploatacija ovog resursa vrši se podzemno u okviru rudnika Grot, ranije Blagodat. Prilivi podzemnih (rudničkih) voda u jamske radove rudnika Grot su visoki i iznose oko 130 l/s (septembar 2019), što ga trenutno svrstava u najovodnjenije rudnike sa podzemnom eksploatacijom u Srbiji. Nezavisno od njih, iz obližnjeg potkopa P-1 u ležištu Kula, ističe još 25 ...
    rudničke vode, ovodnjenost rudnika, prilivi rudničkih voda, kvalitet rudničkih voda

  • Sepiolite – a by-product of exploitation as a potential raw material in Serbian industry

    Radmila Gaćina, Katarina Urošević, Jelena Zakonović (2019)
    This paper gives a brief overview of the sepiolite deposits, the basic properties, and the possibilities of using this mineral. Particular attention is paid to sepiolites from domestic production, especially the use of sepiolites suitable for the development of small businesses and technologies, with a focus on environmental protection. Aim of this paper is to point out importance of this mineral and to draw attention to the use of domestic raw materials. With appropriate mechanical and chemical pretreatments, sepiolite is ...
    sepiolite, by-product, small-scale mine, marginal costs,

  • Ventex: an expert system for mine ventilation systems analysis

    Nikola Lilić, Ranka Stanković, Ivan Obradović (1997)
    roblems relating to mine ventilation systems analysis are usually of a very complex nature. They involve the estimation of numerous interdependent parameters pertaining to the network status, ventilation status, ventilation system stability, air current losses, climate conditions, gas state, fire risk and dangerous dust pollution risk. The solution to these problems relies, to a great extent, on numerical methods. With the development of computer technology these methods were incorporated as numerical routes in software packages, such as the mine ...
    expert system, mine ventilation

  • Hydrochemical indicators of groundwater flow in the area of “Čukaru Peki” Cu-Au underground mine in eastern Serbia

    Nebojša Atanacković, Vladimir Živanović, Jana Štrbački, Veselin Dragišić, Ivana Cvejić (2022)
    The physical and chemical properties of groundwater, together with the groundwater levels regime and rock hydraulic properties, are often used to understand and conceptualize the hydrogeological system. Prediction of the influence of mining works on groundwater, and vice versa, is a challenge due to significantly altered groundwater flow patterns in the raw materials exploitation areas in relation to natural conditions. Therefore, multiple parameters are assessed and monitored before and during exploitation to properly characterize and quantify the system for ...
    mine water, hydrogeology, multivariant statistics, groundwater inflow, water quality

  • History of the development of the hydrodynamic model of the open pit mine “Drmno”, Serbia

    Dušan Polomčić, Jelena Ratković, Vesan Ristić Vakanjac (2023)
    With the creation of a hydrodynamic model, the need for it usually ceases until some next moment when the model needs to be updated and used for the set task for the necessary project documentation or dedicated studies. It is relatively rare that almost every year the model is improved and used for forecast calculations. The paper presents the basic characteristics and development of the hydrodynamic model of the open pit mine “Drmno” for 25 years. This open pit ...
    hydrodynamic model, open pit mine, model recalibration, drainage system