Претрага
33 items
-
Tectonic evolution of the Circum-Moesian orocline of the Carpatho-Balkanides: Paleomagnetic constraints
Emő Márton, Vesna Cvetkov, Miodrag Banješević, Gábor Imre, Aleksandar Pačevski. "Tectonic evolution of the Circum-Moesian orocline of the Carpatho-Balkanides: Paleomagnetic constraints" in Journal of Geodynamics, Elsevier BV (2024). https://doi.org/10.1016/j.jog.2024.102058
-
Strain Partitioning Around an Indenter During Oroclinal Bending: Inferences From Field Kinematic Study And Analogue Modeling with Application to the European Carpatho-Balkanides Orogen
Nemanja Krstekanić, Liviu Matenco, Ernst Willingshofer, Marinko Toljić, Uroš Stojadinović. "Strain Partitioning Around an Indenter During Oroclinal Bending: Inferences From Field Kinematic Study And Analogue Modeling with Application to the European Carpatho-Balkanides Orogen" in AGU Fall Meeting 2021, New Orleans, USA, 13.-17.12.2021., AGU (2021)
-
Strain partitioning around an indenter during oroclinal bending: kinematics of the Circum-Moesian fault system of the Carpatho-Balkanides
Nemanja Krstekanić, Liviu Matenco, Uroš Stojadinović, Ernst Willingshofer, Marinko Toljić, Daan Tamminga (2021)... East Carpathians have driven the formationof the backarc-convex oroclinal bending in the south and west. The orocline formed duringclockwise rotation of the Dacia mega-unit and coeval docking against the Moesian indenter. Thisoroclinal bending was associated with a Paleocene-Eocene orogen-parallel extension ...
... Измењено: 2023-10-14 04:30:44 Strain partitioning around an indenter during oroclinal bending: kinematics of the Circum-Moesian fault system of the Carpatho-Balkanides Nemanja Krstekanić, Liviu Matenco, Uroš Stojadinović, Ernst Willingshofer, Marinko Toljić, Daan Tamminga ...
... Tamminga Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] Strain partitioning around an indenter during oroclinal bending: kinematics of the Circum-Moesian fault system of the Carpatho-Balkanides | Nemanja Krstekanić, Liviu Matenco, Uroš Stojadinović, Ernst Willingshofer ...Nemanja Krstekanić, Liviu Matenco, Uroš Stojadinović, Ernst Willingshofer, Marinko Toljić, Daan Tamminga. "Strain partitioning around an indenter during oroclinal bending: kinematics of the Circum-Moesian fault system of the Carpatho-Balkanides" in EGU General Assembly 2021, Vienna, Austria, 19.-30.4.2021., EGU (2021)
-
Understanding partitioning of deformation in highly arcuate orogenic systems: Inferences from the evolution of the Serbian Carpathians
Nemanja Krstekanić, Liviu Matenco, Marinko Toljić, Oleg Mandić, Uroš Stojadinović, Ernst Willingshofer (2020)... of kinematics in oroclinal bending. This lack of knowledge is particularly valid in places where oroclinal bending takes place towards the backarc (Fig. 1a, the convex side towards the backarc, i.e. herewith defined backarc-convex). One of the best examples of oroclinal bending in Mediterranean ...
... latter, more general meaning of strain partitioning to describe coeval structures of different genetic type associated with oroclinal bending. In all situations, oroclinal bending is associated with large amounts of strain partitioning in various segments of the orocline, which makes it difficult to ...
... intra-continental strike-slip fault system (i.e. Cerna–Timok) that formed coevally with oroclinal bending. Although deformation is distributed along a large number of small structures, we observe that oroclinal bending may be also associated with an orogen-perpendicular extension Fig. 12. 3D sketch of ...Nemanja Krstekanić, Liviu Matenco, Marinko Toljić, Oleg Mandić, Uroš Stojadinović, Ernst Willingshofer. "Understanding partitioning of deformation in highly arcuate orogenic systems: Inferences from the evolution of the Serbian Carpathians" in Global and Planetary Change, Elsevier BV (2020). https://doi.org/10.1016/j.gloplacha.2020.103361
-
Synthesis and characterization of high-pressure and high-temperature sphene (CaTiSiO5)
Jelena Pantić, Vladimir Urbanovich, Vesna Poharc-Logar, Bojan Jokić, Marija Stojmenović, Aleksandar Kremenović, Branko Matović (2014)Sphene (CaTiSiO5), a calcium titanosilicate ceramic has been prepared from a powder mixture of CaCO3, TiO2 and SiO2 using vibro-milling for homogenization and activation of precursors. During the highpressure and high-temperature synthesis (HPS) process at 4 GPa and 1,200 °C, sphene undergoes into phase transition, from room-temperature phase P21/a to high-temperature phase A2/a. Evidence of that structural phase transition is given in this paper using infrared, Raman spectroscopy and X-ray powder diffraction. Rietveld refinement was employed to get the ...Jelena Pantić, Vladimir Urbanovich, Vesna Poharc-Logar, Bojan Jokić, Marija Stojmenović, Aleksandar Kremenović, Branko Matović. "Synthesis and characterization of high-pressure and high-temperature sphene (CaTiSiO5)" in Physics and Chemistry of Minerals, Springer Science and Business Media LLC (2014). https://doi.org/10.1007/s00269-014-0693-x
-
Towards resolving Cretaceous to Miocene kinematics of the Adria-Europe contact zone in reconstructions: Inferences from a structural study in a critical Dinarides area
One key element in the current debate analysing the Central Mediterranean evolution is the Cretaceous structure and kinematics of the present-day oroclinal bent contact between Adria-and Europe-derived continental units in the Dinarides, interpreted in different tectonic reconstructions as a subduction-related thrust system or a large-scale strike-slip fault zone. We provide a solution to the debate by a structural and kinematic study in a key area located in central Serbia along the Europe–Adria orogenic suture of the Sava Zone. The ...Uroš Stojadinović, Nemanja Krstekanić, Liviu Matenco, Tamara Bogdanović. "Towards resolving Cretaceous to Miocene kinematics of the Adria-Europe contact zone in reconstructions: Inferences from a structural study in a critical Dinarides area" in Terra Nova, Wiley (2022). https://doi.org/10.1111/ter.12618
-
FTIR spectroscopic study оf S-мetolachlor сorption оn inorganic and organically modified montmorillonite from Bogovina
... assigned to stretching vibrations of structural OH groups, while the absorption bands at 3447 cm"! and 1643 cm-! were assigned to stretching: and bending vibrations of water molecules in interlayer space 331 SERBIAN SOCIETY OF SOIL SCIENCE Soils for Future under Global Challenges (Tomić et al ...
... spectrum at 1034 cm-! was assigned to stretching Si-O vibrations of the tetrahedral sheet. Absorption bands, which originate from Al-Al-OH and Al-Fe-OH bending vibrations, are located around 916 and 871 cm-!, and they are typical for mineral montmorillonite (Madejova, 2003; Tomić et al, 2012). š las —|\ ...
... 3425 cm"! was attributed to the symmetric vi(H»O) and asymmetric va(H->O) stretching vibrations, while band at 3223 cm ! represent overtone of bending vibrations (2v)(H.O)) (He et al., 2007). At the spectrum of the HDTMA bromide, in the region from 3050-2800 cm !, several bands occur (Fig. 1b) ...Lazar Kaluđerović, Zorica Tomić, Jelena Bogosavljević, Ljubomir Životić, Maja Milošević. "FTIR spectroscopic study оf S-мetolachlor сorption оn inorganic and organically modified montmorillonite from Bogovina" in Book of Proceedings / 3rd International and 15th National Congress Soils for Future Under Global Challenges, 21-24 September 2021 Sokobanja, Serbia , Belgrade : Serbian Society of Soil Science (2021)
-
Analogue modelling of strain partitioning along a curved strike-slip fault system during backarc-convex orocline formation: Implications for the Cerna-Timok fault system of the Carpatho-Balkanides
Nemanja Krstekanić, Ernst Willingshofer, Taco Broerse, Liviu Matenco, Marinko Toljić, Uroš Stojadinović (2021)... Cerna-Timok system and associated Carpatho-Balkanides oroclinal bending Among all modelling scenarios (Fig. 5), the one that simulates most closely the evolution and geometry of the Cerna-Timok fault system and the associated oroclinal bending is model 6, hereafter referred as the “best-fit” model ...
... Carpathians-Serbian Carpathians-Balkanides orocline around the Moesian Platform. Black lines are faults that accommodate deformation related to oroclinal bending. CF – Cerna Fault; TF - Timok Fault. Map is compiled and modified after geological maps of Serbia, Romania and Bulgaria and Maţenco (2017). ...
... relevance of a chosen best-fit model for understanding the evolution of the Cerna-Timok faults system and the associated Carpatho- Balkanides oroclinal bending. All modelling results are subsequently discussed in a process-oriented context. 2. The Cerna-Timok fault system of the Carpatho-Balkanides ...Nemanja Krstekanić, Ernst Willingshofer, Taco Broerse, Liviu Matenco, Marinko Toljić, Uroš Stojadinović. "Analogue modelling of strain partitioning along a curved strike-slip fault system during backarc-convex orocline formation: Implications for the Cerna-Timok fault system of the Carpatho-Balkanides" in Journal of Structural Geology, Elsevier BV (2021). https://doi.org/10.1016/j.jsg.2021.104386
-
Strain partitioning in a large intracontinental strike-slip system accommodating backarc-convex orocline formation: The Circum-Moesian Fault System of the Carpatho-Balkanides
Nemanja Krstekanić, Liviu Matenco, Uroš Stojadinović, Ernst Willingshofer, Marinko Toljić, Daan Tamminga (2022)oroklini, raspodela deformacija, transkurentna kretanja, Karpato-balkanidi, Cirkum-mezijski rasedni sistem... strike-slip deformation along the Sagaing Fault during oroclinal bending around the Eastern Himalayan Syntaxis is comparable to the mechanism of the Balkanides shortening transfer to Cerna and Timok strike-slip deformation during oroclinal bending around the Moesia. The relative plate motion in cases ...
... foreland- and backarc- convex oroclines to describe the geometry of larger scale curvatures that include rotations during orogenic build-up (i.e., oroclinal bending). The overall formation of the Carpatho-Balkanides backarc-convex orocline was associated with the late Oligocene – middle Miocene for- mation ...
... (Figs. 1b, 2; Schmid et al., 2020). All these deformations associated with the ultimate formation of the Carpatho-Balkanides backarc-convex oroclinal bending created a large fault system where contrasting types of deformation affected the orogenic system and are connected around the southern, western ...Nemanja Krstekanić, Liviu Matenco, Uroš Stojadinović, Ernst Willingshofer, Marinko Toljić, Daan Tamminga. "Strain partitioning in a large intracontinental strike-slip system accommodating backarc-convex orocline formation: The Circum-Moesian Fault System of the Carpatho-Balkanides" in Global and Planetary Change, Elsevier BV (2022). https://doi.org/10.1016/j.gloplacha.2021.103714
-
Investigating distant effects of the Moesian promontory: Brittle tectonics along the western boundary of the Getic unit (East Serbia)
In this study, we report evidence for brittle deformation in a part of the Carpatho–Balkan orogen, which is explained in terms of effects of the rigid Moesian promontory of the European plate on fault kinematics in East Serbia. We focus on the westernmost part of the Getic Unit of the East Serbian Carpatho–Balkanides, i.e. the Gornjak–Ravanica Unit, located between two main thrusts that were repeatedly activated from Early Cretaceous to recent times. We combine a new data set on ...Getikum, Mezijska jedinica, Karpato-balkanski orogen, krte deformacije, Gornjačko-ravanička jedinicaAna Mladenović, Milorad D. Antić, Branislav Trivić, Vladica Cvetković. "Investigating distant effects of the Moesian promontory: Brittle tectonics along the western boundary of the Getic unit (East Serbia)" in Swiss Journal of Geosciences, Springer (2019). https://doi.org/10.1007/s00015-018-0324-5
-
Asbestos-Based Pottery from Corsica: The First Fiber-Reinforced Ceramic Matrix Composite
Asbestos-containing pottery shards collected in the northeast of Corsica (Cap Corse) and dating from the 19th century, or earlier, have been analyzed by SEM-EDS, XRPD, FTIR and Raman microspectroscopy. Blue (crocidolite) and white (chrysotile) asbestos fiber bundles are observed in cross-sections. Most of the asbestos is partly or totally dehydroxylated, and some transformation to forsterite is observed to occur, indicative of a firing above 800 C. Examination of freshly fractured pieces shows a nonbrittle fracture with fiber pull-out, consistent with ...... of quartz (strong, narrow Si-O bending, peak at ~465 cm !), a very common mineral of a pottery body, is not easily detected by Raman scattering, although it is present as a minor phase in the XRPD (Figures 5, A1 and A?). On the contrary, feldspar (main Si-O bending, mode at ~505 cm !) is observed ...
... fragments of the shards. Spectrum d/ has been recorded on a fiber bundle extracted from sample d. The bands, for instance, the Si-O stretching, and bending, modes at ~960 (1015 and 1080) and 620 cm-! (Figure 3), are characteristic of asbestos and similar compounds (amphiboles and pyroxenes) [14-21]. ...Philippe Colomban, Aleksandar Kremenović. "Asbestos-Based Pottery from Corsica: The First Fiber-Reinforced Ceramic Matrix Composite" in Materials, MDPI AG (2020). https://doi.org/10.3390/ma13163597
-
Application of Lignite Combustion Waste Slag Generated in Heating Plants as a Partial Replacement for Cement. Part II: Physical–Mechanical and Physical–Chemical Characterization of Mortar and Concrete
Milan Kragović, Nenad Ristić , Jelena Gulicovski, Andrijana Nedeljković, Snežana Pašalić, Ivica Ristović, Marija Stojmenović (2021)sagorevanje lignita, otpadna šljaka, zamena cementa, proizvodnja maltera i betona, fizičko-mehanička i fizičko-hemijska karakterizacija... press “UTC-5600” (Utest, Ankara, Turkey) was used for the testing. A special tool was used for the testing permitting the loading of the sample by a bending force at two thirds of the span. Compressive strength was determined according to standard EN 12390-3 on the samples shaped like cubes with a side ...
... 1346 cm−1 are characteristic of and confirmed the presence of Ca(OH)2 [28]. The bands of 1434, 874, and 692 cm−1 are attributed to in- and out-plane bending and asymmetrical stretching vibrations of the O–C–O, respectively, which occur due to the presence of the CaCO3 [29]. The bands at 1100, 797, and 615 ...
... 615 cm−1 indicate the presence of the SiO2 and are characteristic of asymmetrical and symmetrical stretching modes (1100, 797 cm−1) and bending mode (615 cm−1) as weak bands [30]. The spectral band at 466 cm-1 originates from Fe-O vibrations due to presence of iron oxide (Table 1) [31,32]. – – −1 ...Milan Kragović, Nenad Ristić , Jelena Gulicovski, Andrijana Nedeljković, Snežana Pašalić, Ivica Ristović, Marija Stojmenović . "Application of Lignite Combustion Waste Slag Generated in Heating Plants as a Partial Replacement for Cement. Part II: Physical–Mechanical and Physical–Chemical Characterization of Mortar and Concrete" in Minerals, MDPI (2021). https://doi.org/10.3390/min11090925
-
Smanjenje sleganja plitkih temelja primenom mikrošipova
Slobodan Ćorić, Dragoslav Rakić (2021)Mikrošipovi su šipovi malog prečnika koji se grade tako što se u tlu specijalni postupkom formira bušotina koja se zatim armira i injektira. Njihov prečnik je najčešće 150 – 300 mm, a dužina može da bude i više desetina metara. Mikrošipovi mogu da se grade u svim vrstama tla i mogu da budu vertikalni i kosi. Oni se, stoga, koriste kao zamena za konvencionalne šipove i ankere. Primena mikrošipova u fundiranju predstavlja jedan savremeni način izgradnje i sanacije temelja/objekata. ...Slobodan Ćorić, Dragoslav Rakić. "Smanjenje sleganja plitkih temelja primenom mikrošipova" in Zbornik radova međunarodno naučno-stručnog savetovanja Zemljotresno inženjerstvo i geotehnički aspekti građevinarstva, Vrnjačka banja, 3-5. novembar 2021., Beograd : Savez građevinskih inženjera Srbije (2021)
-
Geotechnical Conditions for Construction of Savski Trg Metro Station as a Part of the Belgrade Metro Line One
In order to solve serious traffic congestion in Belgrade, a number of studies regarding the Belgrade Metro construction have been carried out since 1973. However, only in 2019, the routes of the future metro lines 1 and 2 were de-fined as a part of the General Metro Construction Project. The lines are de-signed to intersect at the location of Sava Square, where an interchange met-ro station will be built. It represents a complex geotechnical structure consist-ing of three different ...Nemanja Stanic, Dragoslav Rakic, Josip Isek, Slavoljub Simic. "Geotechnical Conditions for Construction of Savski Trg Metro Station as a Part of the Belgrade Metro Line One" in Lecture Notes in Civil Engineering, Springer Nature Singapore (2024). https://doi.org/10.1007/978-981-97-8221-5_11
-
Natural two-dimensional pyrophyllite: Nanoscale lubricant, electrical insulator and easily-machinable material
Borislav Vasić, Radoš Gajić, Ivana Milošević, Žarko Medić, Marina Blagojev, Marko Opačić, Aleksandar Kremenović, Dejan Lazić (2022)Pyrophyllite, with the chemical formula Al2Si4O10(OH)2, is a naturally occurring and abundant van der Waals mineral belonging to the group of phyllosilicates. It is very soft, layered crystal used for sculpting and an excellent electrical and thermal insulator aimed for the operation at high pressure and temperature. Here, for the first time, two-dimensional (2D) pyrophyllite obtained by both mechanical and liquid phase exfoliation is presented and investigated at the nanoscale. The layered structure provides low friction coefficient of around ...Atomic force microscopy, Insulating properties, Nanofriction and wear, Natural two dimensional materials, Phyllosilicates, PyrophylliteBorislav Vasić, Radoš Gajić, Ivana Milošević, Žarko Medić, Marina Blagojev, Marko Opačić, Aleksandar Kremenović, Dejan Lazić. "Natural two-dimensional pyrophyllite: Nanoscale lubricant, electrical insulator and easily-machinable material" in Applied Surface Science, Elsevier BV (2022). https://doi.org/10.1016/j.apsusc.2022.155114
-
Laboratory testing of fly ash
Fly ash is one of the most common waste materials created by burning of coal. It is composed of smaller particles, consisting mainly of aluminosilicate glass, mullite and quartz, which are collected by electrostatic separators (filter) of gaseous products arising from the combustion of coal. This paper presents the pozzolanic properties, mechanical properties, chemical and mineral composition of fly ash obtained in the combustion process in a power plant Nikola Tesla A (PPNT A) with the addition of a ...chemical composition, fly ash, mechanical properties, mineral properties, pozzolanic properties, X-ray diffraction... material has been determined. Classes of pozzolanic material are obtained by testing the samples to compressive strength and tensile strength in bending after 7 days. Pozzolanic properties of the fly ash determined by mechanical properties are the most important in the application of ash as road-building ...
... are the most important in the application of ash as road-building material. Depending on the minimum compressive strength and tensile strength in bending after 7 days of making samples, three classes of pozzolanic material can be identified as given in Tab. 5. The composition of pozzolan mainly includes ...Miloš Šešlija, Aleksandra Rosić, Nebojša Radović, Milinko Vasić, Mitar Đogo, Milovan Jotić. "Laboratory testing of fly ash" in Tehnički vijesnik (2016). https://doi.org/10.17559/TV-20150317171035
-
Study of the Synergetic Effect of Co-Pyrolysis of Lignite and High-Density Polyethylene Aiming to Improve Utilization of Low-Rank Coal
Ivan Kojić, Achim Bechtel, Nikoleta Aleksić, Dragana Životić, Snežana Trifunović, Gordana Gajica, Ksenija Stojanović (2021)... representing C–H scissoring and bending. Gaseous alkenes are represented by peaks at around 3100 cm−1, corresponding to C–H stretching; peaks around 1450 cm−1, corresponding to C=C stretch- ing; as well as by peaks observed around 950 cm−1, corresponding to C–H bending (Figure S8b). More pronounced peaks ...
... thermogram of lignite (Figure S8a) indicates that the produced gas mainly consists of water vapour (O–H stretching peaks around 3700 cm−1 and O–H bending peaks from 1400 to 1700 cm−1), CO2 (peaks between 2300 cm−1 and 2400 cm−1 corresponding to C=O stretching), and CO (peaks between 2100 cm−1 and 2200 ...
... at around 3100 cm−1, corresponding to C–H stretching; around 1650 cm−1 corresponding to C=C stretching; and around 950 cm−1, corresponding to C–H bending (Figure S8a). − − − − − − − − − − − − − Figure 5. Enlarged image of thermogravimetric analysis (TGA)-Fourier transform infrared spectroscopy ...Ivan Kojić, Achim Bechtel, Nikoleta Aleksić, Dragana Životić, Snežana Trifunović, Gordana Gajica, Ksenija Stojanović. "Study of the Synergetic Effect of Co-Pyrolysis of Lignite and High-Density Polyethylene Aiming to Improve Utilization of Low-Rank Coal" in Polymers, MDPI AG (2021). https://doi.org/10.3390/polym13050759
-
Geodynamics of basins above subducted slabs: An integrated modelling study of tectonics, sedimentation, and magmatism in the Timok Magmatic Complex
Uros Stojadinovic, Marinko Toljic, Branislav Trivic, Radoje Pantovic, Danica Sreckovic-Batocanin, Nemanja Krstekanic, Bojan Kostic, Milos Velojic, Jelena Stefanovic, Nikola Randjelovic, Maja Males (2024)Uros Stojadinovic, Marinko Toljic, Branislav Trivic, Radoje Pantovic, Danica Sreckovic-Batocanin, Nemanja Krstekanic, Bojan Kostic, Milos Velojic, Jelena Stefanovic, Nikola Randjelovic, Maja Males. "Geodynamics of basins above subducted slabs: An integrated modelling study of tectonics, sedimentation, and magmatism in the Timok Magmatic Complex" in Annales geologiques de la Peninsule balkanique, National Library of Serbia (2024). https://doi.org/10.2298/GABP240116003S
-
Comprehensive Profiling of Microbiologically Induced CaCO3 Precipitation by Ureolytic Bacillus Isolates from Alkaline Soils
Olja Šovljanski, Lato Pezo, Jovana Stanojev, Branimir Bajac, Sabina Kovač, Elvira Tóth, Ivan Ristić, Ana Tomić, Aleksandra Ranitović, Dragoljub Cvetković, Siniša Markov (2021)MICP process, kinetic study, calcite, vaterite, MALDI-TOF identification, Bacillus licheniformis, Sporosarcina pasteurii... signals for CaCO3 are at ~1400 cm−1 (ν3—doubly degenerate planar asymmetric stretching), ~870 cm−1 (ν2—out-of-plane bending), and between 700 and 746 cm−1 (ν4—doubly degenerate planar bending). The absorption band 1100−1000 cm−1 can also be detected (ν1—symmetric stretching) but is less noticeable and does ...Olja Šovljanski, Lato Pezo, Jovana Stanojev, Branimir Bajac, Sabina Kovač, Elvira Tóth, Ivan Ristić, Ana Tomić, Aleksandra Ranitović, Dragoljub Cvetković, Siniša Markov. "Comprehensive Profiling of Microbiologically Induced CaCO3 Precipitation by Ureolytic Bacillus Isolates from Alkaline Soils" in Microorganisms, MDPI AG (2021). https://doi.org/10.3390/microorganisms9081691
-
Aлтерације перидотита контролисане карактером флуида на примеру харцбургита Рудника - Серпентинизација или талкизација?
Стефан Петровић, Наталија Батоћанин (2020)У раду су приказани резултати испитивања серпентинисаних харцбургита Брђана (43°58'45.1" СГШ, 20°25'12.6" ИГД) и талкизираних харцбургита откривених у интервалу 429-559.8 m у истражној бушотини 330А/18 (44°07'33.2" СГШ, 20°30'28.5" ИГД) на Руднику. Узорци оба локалитета показују карактеристике резидуалних харцбургита из омотача, односно тектонита; лепидобластичне, бластозрнасте, или порфирокластичне структуре и масивне текстуре. Серпентинисани харцбургити и серпентинити Брђана су изграђени од серпентина, ретких реликата оливина и ортопироксена, акцесорног спинела, и веома ретког секундарног магнезита и магнетита. Најдоминантнији састојак (местимично гради и преко ...... is the second mineral in abundance making up to 30 vol. % of rocks. Subhedral grains of it, sporadically exceeding 4 mm (porphyroclast) display bending characteristic for tectonites and weak transformation into bastite (Fig. 9). Thin veinlets of magnesite, from 0.1 tо 0.5 mm thick over orthopyroxene ...Стефан Петровић, Наталија Батоћанин. "Aлтерације перидотита контролисане карактером флуида на примеру харцбургита Рудника - Серпентинизација или талкизација?" in Записници српског геолошког друштва, Српско геолошко друштво, Београд (2020)